Home » D-Link Manuals » Webcams » D-Link DCS-950 » Manual Viewer

D-Link DCS-950 Product Manual

D-Link DCS-950 - Network Camera Manual

UPC - 790069270710

View all D-Link DCS-950 manuals

Add to My Manuals
Save this manual to your list of manuals

D-Link DCS-950 manual content summary:

D-Link DCS-950 | Product Manual - Page 1
D-Link DCS-950 | Product Manual - Page 2
...32 Tools ...33 Admin...33 System ...34 Default ...35 Firmware 36 Recording 37 Trigger ...38 Motion Detection 39 Port ...40 Status ...41 Device Info 41 Help ...42 Installing the DCS-950 Behind a Router 43 Single Camera Installation 43 Multiple Camera Installation 43 D-Link Systems, Inc. 2
D-Link DCS-950 | Product Manual - Page 3
DCS-950 User's Manual Table of Contents 1) Identify Your Camera on the Network 44 2) Assign a Local IP Address for Your Camera 44 Assigning and Opening the HTTP Port on the DCS-950 45 3) Open the HTTP Port 45 Router Setup and Installation 46 Assigning and Opening Virtual Server Ports 47 4)
D-Link DCS-950 | Product Manual - Page 4
DCS-950 User's Manual Table of Contents Frequently Asked Questions 76 Internet Camera Features 76 Internet Camera Installation 78 How to Ping Your IP Address 80 Time Zone Table 82 Adjusting the Camera Focus 84 Technical Speciﬁcations 85 Contacting Technical Support 87 Warranty 88
D-Link DCS-950 | Product Manual - Page 5
DCS-950 User's Manual Package Contents  D-Link SECURICAM Network DCS-950 Internet Camera  Cat5 Ethernet Cable  Power Adapter (5.0V, 2.5A)  Camera Stand with Mounting Bracket and Screws  CD-ROM with Software and Manual  Quick Installation Guide Package Contents Note: Using a power supply with
D-Link DCS-950 | Product Manual - Page 6
DCS-950 User's Manual Introduction Introduction Congratulations on your purchase of the DCS-950 Internet Camera! The DCS-950 is a versatile and unique solution for your small ofﬁce or home. Unlike a PC Camera, the DCS-950 is a stand-alone system with a built-in CPU and Web server that transmits
D-Link DCS-950 | Product Manual - Page 7
no special hardware or software such as PC frame grabber cards. The DCS-950 supports ActiveX mode for Internet Explorer. All that is required is a computer with Internet Explorer 6.0 or above.  Supports a Variety of Platforms: Supporting TCP/IP networking, HTTP, and other Internet related protocols
D-Link DCS-950 | Product Manual - Page 8
ten seconds. Release the reset button and the Power LED will begin to ﬂash indicating that the DCS-950's settings are reverting back to the factory settings. The IP address will also return to the default setting of 192.168.0.20. Hardware Overview DC Power Connector The DC power input connector is
D-Link DCS-950 | Product Manual - Page 9
DCS-950 User's Manual LEDs Power LED The Power LED is positioned on the right side of the DCS-950 lens. Steady orange conﬁrms that the DCS-950 is powered ON. Hardware Overview Link LED The Link LED is positioned on the right side of the DCS-950's lens. It is located below the Power LED. Steady
D-Link DCS-950 | Product Manual - Page 10
Ethernet Cable Connect the included Ethernet cable to the network cable connector located on the back panel of the DCS-950 and attach it to the network. Network Connectivity is conﬁrmed when the green LED Indicator on the DCS-950 located below the Power LED is illuminated. D-Link Systems, Inc. 10
D-Link DCS-950 | Product Manual - Page 11
DCS-950 User's Manual Hardware Installation Attach the Mounting Bracket If you would like to mount the camera on a wall, locate the necessary screws and continue with securing the bracket to the wall. To attach the mounting bracket to the Camera, simply attach the Camera's base to the bracket (see
D-Link DCS-950 | Product Manual - Page 12
DCS-950 User's Manual Security Security To ensure the highest security and prevent unauthorized usage of the DCS-950, the Administrator has the exclusive privilege to authorize all users. The DCS-950 supports multi-level password protection/access that can be restricted by the Administrator for de
D-Link DCS-950 | Product Manual - Page 13
DCS-950 User's Manual Using the Setup Wizard Using the Setup Wizard Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. Insert the D-Link DCS-950 CD into your CD-ROM drive. Click Install Software. Click Installation Wizard. D-Link Systems
D-Link DCS-950 | Product Manual - Page 14
DCS-950 User's Manual Click Next. Using the Setup Wizard Click Yes. D-Link Systems, Inc. 14
D-Link DCS-950 | Product Manual - Page 15
DCS-950 User's Manual Click Next. Using the Setup Wizard Click Finish. D-Link Systems, Inc. 15
D-Link DCS-950 | Product Manual - Page 16
DCS-950 User's Manual Select a language and click OK. Using the Setup Wizard Click Next. D-Link Systems, Inc. 16
D-Link DCS-950 | Product Manual - Page 17
DCS-950 User's Manual Click I Agree. Using the Setup Wizard Click Next. D-Link Systems, Inc. 17
D-Link DCS-950 | Product Manual - Page 18
DCS-950 User's Manual Click Install. Using the Setup Wizard Click Next. D-Link Systems, Inc. 18
D-Link DCS-950 | Product Manual - Page 19
DCS-950 User's Manual Click Finish. Using the Setup Wizard To run the Setup Wizard, click on Start->Programs->DCS-950 Series Setup Wizard. Your camera's default IP Address will be displayed on the screen. Click Wizard to begin. D-Link Systems, Inc. 19
D-Link DCS-950 | Product Manual - Page 20
DCS-950 User's Manual Using the Setup Wizard By default, the Admin ID and Password are "admin" (lower case). Enter this in both ﬁelds. To change the Admin Password, select the Change box and enter a New Password. Click Next. The IP Address, Subnet Mask of your camera, Gateway, and DNS addresses
D-Link DCS-950 | Product Manual - Page 21
DCS-950 User's Manual Using the Setup Wizard If you need to make any changes, click Back to modify your camera settings. Otherwise, click Restart to save and apply your settings. This may take a few minutes. Your setup is now complete! Wait until the Link LED on the camera begins to ﬂash. Click
D-Link DCS-950 | Product Manual - Page 22
DCS-950 User's Manual Your camera is now displayed in the Web browser. Using the Setup Wizard D-Link Systems, Inc. 22
D-Link DCS-950 | Product Manual - Page 23
page from a Web Browser, enter the IP address that you assigned to your DCS-950. Home Screen When you click on "Link", the DCS-950 Home screen will appear. Use the following displayed options to set up and view your Internet Camera:  Wizard  Setup  Audio On  Upside Down  Mirrored  Snap
D-Link DCS-950 | Product Manual - Page 24
DCS-950 User's Manual Using the Conﬁguration Menu Wizard: Setup: Audio On: Upside Down: Mirrored: Snapshot: D-Link Systems, Inc. Home Screen This page is used to set up the DCS-950 using the Wizard to walk you through setting up the camera for your network. This will allow you to change the conﬁ
D-Link DCS-950 | Product Manual - Page 25
DCS-950 User's Manual Logout: Nightshot: Brightness: On-line User: File Path: Start Video Recording: Using the Conﬁguration Menu Click to log out of the DCS-950. If you would like to view or conﬁgure the camera, you will must log in again. Select this if the camera is operating under low light
D-Link DCS-950 | Product Manual - Page 26
the settings required for the DCS950. There will be several options in the Conﬁguration page to choose from to setup your DCS-950 and they are as follows:  Advanced Video User LAN PPPoE DDNS  Tools Admin Time System Firmware Recording Trigger  Status Device Info  Help D-Link Systems, Inc. 26
D-Link DCS-950 | Product Manual - Page 27
DCS-950 User's Manual Using the Conﬁguration Menu Advanced The Advanced tab provides the following conﬁguration options: Video, User, LAN, PPPoE, and DDNS. Video Default video quality. By default the quality is set to High. This is the size of the video display. By default the capture resolution
D-Link DCS-950 | Product Manual - Page 28
network a lower bit rate than 352k is advised The camera name will display as the title of the window within the Windows operating system. This name will also appear on the log-in screen (once a password has been set). Select to enable or disable motion detection. By default, motion detection
D-Link DCS-950 | Product Manual - Page 29
). Enter the user's password you want to assign to the speciﬁc Username. The maximum password length is 16 characters (Printable ASCII). The User List displays all the user names that have access to the DCS-950. To delete a user, click on the corresponding trash can icon. D-Link Systems, Inc. 29
D-Link DCS-950 | Product Manual - Page 30
DCS-950 User's Manual LAN Using the Conﬁguration Menu LAN Settings: Advanced > LAN If you are using a LAN connection, select either Static IP or DHCP Client. If manually assigning a Static IP, enter your IP Address, IP Subnet Mask, Gateway IP Address, and DNS into the ﬁelds provided. D-Link
D-Link DCS-950 | Product Manual - Page 31
DCS-950 User's Manual PPPoE Using the Conﬁguration Menu PPPoE: Advanced > PPPoE If you are using a PPPoE connection, click the Yes button and enter the User Name and Password for your PPPoE account. D-Link Systems, Inc. 31
D-Link DCS-950 | Product Manual - Page 32
and the DCS-950 will automatically update your DDNS server every time it receives a different IP address. Depending on the service, this update may take a few hours. If you are using a DDNS connection, click the Yes button and enter in your User Name, Password, and Domain Name. D-Link Systems, Inc
D-Link DCS-950 | Product Manual - Page 33
DCS-950 User's Manual Using the Configuration Menu Tools The Tools tab provides the following configuration options: Admin, System, Default, Firmware, Recording, Trigger, Motion Detection, and Port. Admin User Name: Password: New Password: Confirm Password: Tools > Admin Enter the administrator
D-Link DCS-950 | Product Manual - Page 34
DCS-950 User's Manual System Using the Conﬁguration Menu Time: Date: Default NTP Server: Synchronize with computer time: Set the Time: Time Zone: Daylight Saving Time: D-Link Systems, Inc. Tools > System The current camera time. The current camera date. Enter the IP address or domain name of the
D-Link DCS-950 | Product Manual - Page 35
DCS-950 User's Manual Default Using the Conﬁguration Menu Restart: Default: Tools > Default Click the Restart button to restart the camera system. Click the Restore button to restore factory default settings.This means that any changes made will be lost and the system will be reset to the initial
D-Link DCS-950 | Product Manual - Page 36
DCS-950 User's Manual Firmware Using the Configuration Menu Tools > Firmware You can upgrade the firmware by using this tool. First, check the D-Link support site for firmware updates at http://support.dlink.com. Make sure that the firmware you want to use is saved on the local hard drive of your
D-Link DCS-950 | Product Manual - Page 37
DCS-950 User's Manual Recording Using the Conﬁguration Menu Upload Image to Network Share Folder: Login Method: User Name: Password: Path: Always: Schedule: Smart Recording: D-Link Systems, Inc. Tools > Recording Clicking on the box will enable uploading of images to your network no motion is 37
D-Link DCS-950 | Product Manual - Page 38
DCS-950 User's Manual Trigger Using the Conﬁguration Menu SMTP Login Name: SMTP Password: SMTP (Mail) Server: Return E-mail address: Recipient E-mail address: SMTP Port: D-Link Systems, Inc. Tools > Trigger The user name used to log into your e-mail account (e.g. jdoe or [email protected]
D-Link DCS-950 | Product Manual - Page 39
DCS-950 User's Manual Using the Conﬁguration Menu Motion Detection Skip Time: Increasing the time set here will avoid false alarms. This option allows you to set the amount of time between motion detection events before the next recording will start. Motion Detection Motion: Sensitivity:
D-Link DCS-950 | Product Manual - Page 40
DCS-950 User's Manual Save: Open MSD: Port Using the Conﬁguration Menu Saves the related settings of that window. Click to open the Motion Screen Display. The MSD window allows you to monitor the amount of motion detected in each motion window. The graphic bars will increase or decrease depending
D-Link DCS-950 | Product Manual - Page 41
DCS-950 User's Manual Using the Conﬁguration Menu Note: You MUST also set up your router/gateway for Port Mapping; this will enable remote viewing of your camera via the Internet. Please refer to your router's instruction manual on how to open up ports. For additional help on conﬁguring your
D-Link DCS-950 | Product Manual - Page 42
DCS-950 User's Manual Using the Conﬁguration Menu The Device Info screen lists the following important settings that are currently set for the DCS-950.  IP Address  IP Subnet Mask  Gateway IP Address  PPPoE  Wireless  Server Name  Firmware Version  On-Line User Numbers Help Click on the
D-Link DCS-950 | Product Manual - Page 43
DCS-950 User's Manual Installing the DCS-950 Behind a Router Installing the DCS-950 Behind a Router Single Camera Installation If you are installing a single camera on your network the installation is an easy 4-step procedure: 1) Identify Your Camera on the Network 2) Assign a Local IP Address
D-Link DCS-950 | Product Manual - Page 44
settings are important if you are installing several cameras on your network. 2) Assign a Local IP Address for Your Camera A Local IP Address is required to conﬁgure your camera and to view your camera within your local (home) network.You may use the default camera IP Address of 192.168.0.20. If
D-Link DCS-950 | Product Manual - Page 45
remotely. 3) Open the HTTP Port The HTTP Port option is used when multiple cameras are being installed behind a single public IP address and will be accessed remotely OR for using a port other than the default port for image viewing. For each additional camera that is installed, you must select the
D-Link DCS-950 | Product Manual - Page 46
DCS-950 User's Manual Installing the DCS-950 Behind a Router Router Setup and Installation The following steps generally apply to any router that you have on your network. The D-Link DI-624 is used as an example to clarify the conﬁguration process. Your WAN Ip Address information will be listed on
D-Link DCS-950 | Product Manual - Page 47
Enabled to enable virtual server settings. •Select a camera name. •Enter your camera's Local IP Address in the Private IP ﬁeld. •Select TCP under Protocol Type. •If you are using the default camera port settings, enter 80 in to the Public and Private Port section. •Schedule should be set to Always
D-Link DCS-950 | Product Manual - Page 48
DCS-950 User's Manual Installing the DCS-950 Behind a Router Viewing Your Camera After all settings have been entered correctly, a user inside or outside your network will have access to the camera through a standard Web browser. To access from the Internet, simply type in the IP Address of the
D-Link DCS-950 | Product Manual - Page 49
-950. IPView Lite is a complete software management tool for the DCS-950 and includes all conﬁgurable settings available in the Web conﬁguration utility. Insert the CD-ROM into the CD-ROM drive. A menu screen will appear as shown on below. Click Install Software. Click Install IPView Lite. D-Link
D-Link DCS-950 | Product Manual - Page 50
DCS-950 User's Manual Click Next. Click Yes. Click Next. D-Link Systems, Inc. IPView Lite Application Installation 50
D-Link DCS-950 | Product Manual - Page 51
DCS-950 User's Manual Click Next. IPView Lite Application Installation If your sound card or video card has not passed Windows Logo testing, this window will appear. Click Continue Anyway. If there are previously installed target ﬁles that are newer than the source ﬁles, do NOT overwrite them.
D-Link DCS-950 | Product Manual - Page 52
the IPView Lite, the application program for the DCS-950 is automatically installed to \Programs\IPViewLite Directory. To start running the IPView Lite click on Windows Start > Programs > IPViewLite > IPViewLite. Enter the default User Name: admin into the respective ﬁeld and click on OK to
D-Link DCS-950 | Product Manual - Page 53
DCS-950 User's Manual IPView Lite Application Installation Once logged in, the IPView Lite application is executed and the IPView Lite interface will appear in the default List View format: D-Link Systems, Inc. 53
D-Link DCS-950 | Product Manual - Page 54
the application. IPView Lite allows you to manage your cameras by enabling you to search, conﬁgure and preview all the DCS-950s from one location. It is designed with a user-friendly interface for ease of control and navigation. How to Change the Password When IPView Lite is used for the ﬁrst time
D-Link DCS-950 | Product Manual - Page 55
on your local area network can be located using Browse in IPView Lite. If you want to add a camera via the Internet, you must enter in a physical IP Address. Remember that if your camera is behind a router, you will need to enter your router's WAN IP followed by a colon, then the port number that is
D-Link DCS-950 | Product Manual - Page 56
DCS-950 User's Manual IPView Lite Click on Search. IPView Lite will detect and search for all the available cameras that are installed on the local area network. Highlight the camera you wish to add and click on Add. The Add Camera dialog box will appear once again with the IP Address entered.
D-Link DCS-950 | Product Manual - Page 57
DCS-950 User's Manual IPView Lite How to Delete a Camera To delete a camera you must highlight the camera you wish to delete from the IPView Lite list view format. From the menu bar select Camera > Delete. A Delete Camera dialog box will appear. Click Yes to delete the camera, or click No if you
D-Link DCS-950 | Product Manual - Page 58
DCS-950 User's Manual IPView Lite How to Change the IP Address To change an IP Address for a camera, select Camera > Add. An Add Camera dialog box will appear (see below). Click on Browse. The Browse Camera dialog box will appear with a blank screen (see below). Click Search. IPView Lite will
D-Link DCS-950 | Product Manual - Page 59
to enter your admin ID and password before IPView Lite will allow you to change the IP Address for the DCS-950. Enter the new IP Address, the Subnet Mask, and the Default gateway into the respective ﬁelds and click OK. IPView Lite will apply the new IP Address to the camera. How to Format the
D-Link DCS-950 | Product Manual - Page 60
DCS-950 User's Manual IPView Lite The icon on the upper left corner of the screen will appear with the camera number that is being displayed. To return to the IPView Lite list view , click on Rotate Left in the menu, the video will rotate 90 degrees to the right or left. D-Link Systems, Inc. 60
D-Link DCS-950 | Product Manual - Page 61
DCS-950 User's Manual IPView Lite How to take a Snap-Shot with the Camera To take a snap shot with the camera, you must highlight the camera you wish to use from the IPView Lite list view format. From the menu bar select Camera either 1 or 4 cameras. Click on the 1 or 4 cameras), right-click on
D-Link DCS-950 | Product Manual - Page 62
DCS-950 User's Manual IPView Lite Camera Property Settings Once you have completed the initial configuration of the DCS-950 using the Web-based interface, you can review or change your configuration using either the Web-based configuration utility or the Property Settings in the DCS-950 IPView Lite.
D-Link DCS-950 | Product Manual - Page 63
tab provides options for manual recording, schedule recording, or motion trigger recording. Manual Recording If the Manual Recording option is chosen, you must manually start recording in the List view of the DCS-950 in the Menu Bar or by clicking on the Record Icon. D-Link Systems, Inc. 63
D-Link DCS-950 | Product Manual - Page 64
DCS-950 User's Manual IPView Lite Scheduled Recording Select Schedule Recording to record based on speciﬁc times and dates. Click Schedule Setting to set the time and date for recording your ﬁles. Select By Date and enter in the dates, Start, and Stop Times. The camera will start to record
D-Link DCS-950 | Product Manual - Page 65
DCS-950 User's Manual IPView Lite Motion Trigger Recording Checking Motion Trigger Recording enables the DCS-950 to record based on motion. When this option is selected and the camera detects motion within the range of the viewing window, recording will be triggered. Recording will continue until
D-Link DCS-950 | Product Manual - Page 66
DCS-950 User's Manual IPView Lite Menu Bar The menu bar makes it easier to navigate IPView Lite. All Management functions can be accessed from the menu bar. File New : Open: Save/Save As: Exit: D-Link Systems, Inc. Opens a new camera list. Cameras must then be added to the list for conﬁguration.
D-Link DCS-950 | Product Manual - Page 67
DCS-950 User's Manual IPView Lite View View on the menu bar provides users with management capabilities for Columns, List, Camera and Refresh. You can view the Camera in 1 Camera or 4 Camera mode. The View menu bar is pictured below. Columns When Columns is launched, a dialog box will appear
D-Link DCS-950 | Product Manual - Page 68
DCS-950 User's Manual IPView Lite List View You can view the format in List view. The List viewing format allows easy management and control of each camera. All the cameras and their properties, such as the camera name, IP Address, user name, and location, will be displayed in the list view. Note
D-Link DCS-950 | Product Manual - Page 69
DCS-950 User's Manual IPView Lite Camera Camera on the menu bar provides options to manage the camera. Add up to 4 additional Cameras for viewing. The Camera menu also allows you to Delete a camera, manage the Property, Enable real-time video capture, or take a Snap shot image. Enable Function By
D-Link DCS-950 | Product Manual - Page 70
DCS-950 User's Manual IPView Lite Account The account menu is for administrators to change user name and password. System Conﬁguration . This menu allows you to set overwrite options recommended that you select this option to save your camera settings in IPView Lite. D-Link Systems, Inc. 70
D-Link DCS-950 | Product Manual - Page 71
DCS-950 User's Manual IPView Lite In order to allow old video ﬁles to be overwritten and replaced by new recorded ﬁles, place Recording File Path Settings in the Recording menu. About Under About on the menu bar, click About for camera details such as software version. D-Link Systems, Inc. 71
D-Link DCS-950 | Product Manual - Page 72
DCS-950 User's Manual IPView Lite IPView Lite Icon Description Open a new file. The hot key is Ctrl+N. Open an existing file. The hot key is Ctrl+O. Save a file. The hot key is Ctrl+S. List view format. The hot key is Ctrl+F1. 1 Camera view format. The hot key is Ctrl+F3. 4 Camera view format. The
D-Link DCS-950 | Product Manual - Page 73
DCS-950 User's Manual IPView Lite Context Sensitive Menu In List View format, highlight a camera and right-click to bring up a context sensitive menu for : Enable, Rotate Right, Rotate Left, Snap Shot, Start, List, 1 Camera or 4 Cameras, Previous Page and Next Page. D-Link Systems, Inc. 73
D-Link DCS-950 | Product Manual - Page 74
DCS-950 User's Manual Uninstall IPView Application Uninstall IPView Application Click on windows Start Menu > Programs > IPView > Uninstall IPView. A new prompt screen will be displayed like , a Conﬁrm Uninstall dialog box will appear. Click OK to continue the process. D-Link Systems, Inc. 74
D-Link DCS-950 | Product Manual - Page 75
DCS-950 User's Manual Uninstall IPView Application The InstallShield Wizard prompt will appear. Click Finish to complete the uninstallation procedure. D-Link Systems, Inc. 75
D-Link DCS-950 | Product Manual - Page 76
DCS-950 User's Manual Frequently Asked Questions Frequently Asked Questions Internet Camera Features 1 What is an Internet Camera? The Internet Camera is a stand-alone system connecting directly to an Ethernet or Fast Ethernet network and supported by the wireless transmission based on the IEEE
D-Link DCS-950 | Product Manual - Page 77
only on Ethernet and Fast Ethernet network or supported by wireless transmission. The D-Link DSB-C110, DSB-C310 can be used as a PC Camera (Webcam). 8 Can the Internet Camera be connected on the network if it consists of only private IP Addresses? Yes, the Internet Camera can be connected to a LAN
D-Link DCS-950 | Product Manual - Page 78
DCS-950 User's Manual Frequently Asked Questions cable. Test the network interface of the product by connecting a local computer directly to the unit, utilizing a standard Crossover Cable, and run the PING utility. If the problem is not solved, the Internet Camera might be faulty. Internet Camera
D-Link DCS-950 | Product Manual - Page 79
settings on your browser to allow the ActiveX plug-in to be installed. If you are using Internet Explorer with a version number of lower than 5, then you will need to upgrade your Web browser software in order to view the streaming video transmitted by the Internet Camera. D-Link Systems, Inc. 79
D-Link DCS-950 | Product Manual - Page 80
rm if the IP Address conﬂicts with the Internet Camera over the network. Follow the step-by-step procedure below to utilize the PING command. Start a DOS window Start>Program>Accessories>Command Prompt Type ping x.x.x.x, where x.x.x.x is the IP Address of the Internet Camera. A successful connection
D-Link DCS-950 | Product Manual - Page 81
DCS-950 User's Manual How to Ping Your IP Address If you fail to connect to your camera you will see the following: Check to see if you have entered your camera's IP Address correctly or reassign your camera's IP Address. D-Link Systems, Inc. 81
D-Link DCS-950 | Product Manual - Page 82
DCS-950 User's Manual Time Zone Table Time Zone Table GMT stands for Greenwich Mean Time, which is the global time that all time zones are measured from. D-Link Systems, Inc. 82
D-Link DCS-950 | Product Manual - Page 83
DCS-950 User's Manual Time Zone Table D-Link Systems, Inc. 83
D-Link DCS-950 | Product Manual - Page 84
image quality, keep in mind that while adjusting the DCS-950 focus you can preview the image quality from your Web browser. Camera Lens Adjust by turning clockwise or counter-clockwise. Note: You can further adjust the Internet Camera's image quality through the Web Conﬁguration under Advanced
D-Link DCS-950 | Product Manual - Page 85
DCS-950 User's Manual Technical Specifications Technical Specifications Video specification Resolution: Sensor: Gain Hue control: Range 1- 128 System Hardware LAN Connector: auto- LED Indicator: One RJ-45 port to connect to 10/100Mbps Ethernet, sensed, auto MDI/X Power LED (Orange) LAN Activity
D-Link DCS-950 | Product Manual - Page 86
DCS-950 User's Manual Technical Speciﬁcations Communication Support Communication: Communication protocol: RARP, 10/100Mbps Ethernet and Fast Ethernet only HTTP, TCP/IP, UDP, ARP, ICMP, BOOTP, DHCP, PPPoE Web Conﬁguration Requirements:  Internet Explorer 6.0 or above  CPU: Pentium II, 266 MHz
D-Link DCS-950 | Product Manual - Page 87
DCS-950 User's Manual Contacting Technical Support Contacting Technical Support You can ﬁnd software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this
D-Link DCS-950 | Product Manual - Page 88
provided that the Software is properly installed on approved hardware and operated as contemplated in its documentation. D-Link further warrants that, during the Warranty Period, the magnetic media on which D-Link delivers the Software will be free of physical defects. DLink's sole obligation shall
D-Link DCS-950 | Product Manual - Page 89
DCS-950 User's Manual Warranty Non-Applicability of Warranty: The Limited Warranty provided hereunder for hardware and software of D-Link's products will not be applied to and does not cover any refurbished product and any product purchased through the inventory clearance or liquidation sale or
D-Link DCS-950 | Product Manual - Page 90
DCS-950 User's Manual LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK . THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY
D-Link DCS-950 | Product Manual - Page 91
DCS-950 User's Manual Warranty FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.
D-Link DCS-950 | Product Manual - Page 92
DCS-950 User's Manual Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. 05/06/05 D-Link Systems, Inc. 92

Match case Limit results 1 per page