D-Link DFL-860E Log Reference Guide for DFL-260E - Page 165

2.8.10. no_return_route (ID: 00600014) Chapter 2. Log Message Reference Parameters Context Parameters protocol Rule Name Packet Buffer 2.8.10. no_return_route (ID: 00600014) Default Severity Log Message Explanation Gateway Action Recommended Action Revision Context Parameters WARNING Failed to open a new connection since a return route to the sender address cant be found. Dropping packet There was no return route found to the sender address of the packet. Therefore, a new connection could not be opened and the packet is dropped. reject None. 1 Rule Name Connection Packet Buffer 2.8.11. reverse_connect_attempt (ID: 00600015) Default Severity Log Message Explanation Gateway Action Recommended Action Revision Context Parameters WARNING Disallowed reverse connect attempt from peer. Dropping State inspector does not allow this packet in reverse direction on the already opened connection. This type of packet is only allowed to be sent by the originator of a connection. Dropping the packet. drop None. 1 Rule Name Connection Packet Buffer 2.8.12. port_0_illegal (ID: 00600020) Default Severity Log Message Explanation Gateway Action WARNING TCP/UDP destination port or TCP source port was set to 0. Dropping The TCP/UDP destination or TCP source port was set to 0, which is not allowed. Dropping packet. drop 165