D-Link DGS-108 Product Manual - Page 14

Mounting the Switch on a Wall - wall mount

Get D-Link DGS-108 PDF manuals and user guides
UPC - 790069285998
View all D-Link DGS-108 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

D-Link DGS-108 Unmanaged Gigabit Ethernet Switch Mounting the Switch on a Wall The DGS-108 can be mounted on a wall. Two mounting slots are provided on the bottom of the Switch for this purpose. Make sure that the front panel is exposed in order to view the LEDs. Refer to the illustration below: A.) Cement wall 1. Mount the nylon screw anchors into a cement wall. 2. Drive the T3 x 15L screws into the nylon screw anchors. 3. Hook the mounting holes at the back of the switch onto the screws. The wall-mount process is complete. B.) Wooden wall 1. Insert the T3 x 15 L screws into the wood wall. 2. Hook the mounting holes at the back of the switch onto the screws. The wall-mount process is complete. Figure 2- 1. Mounting the Switch to a Wall 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
D-Link DGS-108 Unmanaged Gigabit Ethernet Switch
7
Mounting the Switch on a Wall
The DGS-108 can be mounted on a wall. Two mounting slots are provided on the bottom of the Switch for this
purpose. Make sure that the front panel is exposed in order to view the LEDs. Refer to the illustration below:
A.)
Cement wall
1.
Mount the nylon screw anchors into a cement wall.
2.
Drive the T3 x 15L screws into the nylon screw anchors.
3.
Hook the mounting holes at the back of the switch onto the screws. The wall-mount process is
complete.
B.)
Wooden wall
1.
Insert the T3 x 15 L screws into the wood wall.
2.
Hook the mounting holes at the back of the switch onto the screws. The wall-mount process is
complete.
Figure 2- 1.
Mounting the Switch to a Wall