D-Link DGS-1210-52 Reference Guide - Page 34
System > SysLog Host, System > Time Profile - 24 manual
View all D-Link DGS-1210-52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
5 Configuration D-Link Web Smart Switch User Manual Figure 5.22 - System > DHCP Auto Configuration System > SysLog Host System Logs record and manage events, as well as report errors and informational messages. Message severity determines a set of event messages that will be sent. Click Enable so you can start to configure the related settings of the remote system log server, then press Apply for the changes to take effect Figure 5.23 - System > SysLog Host Settings Server IP Address: Specifies the IP address of the system log server. UDP Port: Specifies the UDP port to which the server logs are sent. The possible range is 1 - 65535, and the default value is 514. Time Stamp: Select Enable to time stamp log messages. Severity: Specifies the minimum severity from which warning messages are sent to the server. There are three levels. When a severity level is selected, all severity level choices above the selection are selected automatically. The possible levels are: Warning - The lowest level of a device warning. The device is functioning, but an operational problem has occurred. Informational - Provides device information. All - Displays all levels of system logs. Facility: Specifies an application from which system logs are sent to the remote server. Only one facility can be assigned to a single server. If a second facility level is assigned, the first facility is overwritten. There are up to eight facilities can be assigned (Local 0 ~ Local 7). System > Time Profile The Time Profile page allows users to configure the time profile settings of the device. Figure 5.24 - System > Time Profile Profile Name: Specifies the profile name. Time(HH MM): Specifies the Start Time and End Time. Weekdays: Specifies the work day. Date: Select Date and specifies the From Day and To Day of the time profile. Click Add to create a new time profile or click Delete to delete a time profile from the table 29