D-Link DGS-3627 Product Manual - Page 472

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Figure 8- 48. DVMRP Routing Next Hop Table window PIM Monitor Multicast routers use Protocol Independent Multicast (PIM) to determine which other multicast routers should receive multicast packets. To find out more information concerning PIM and its configuration on the Switch, see the IP Multicast Routing Protocol chapter of Section 6, Configuration. Browse PIM Neighbor Table The PIM Neighbor Address Table contains information regarding each of a router's PIM neighbors. To search this table, enter an Interface Name, Neighbor Address or Neighbor Netmask into the respective field and click the Find button. PIM neighbors of that entry will appear in the PIM Neighbor Address Table below. To view this window, click Monitoring > PIM Monitor > Browse PIM Neighbor Table, as shown below: Figure 8- 49. PIM Neighbor Address Table window Browse PIM IP Multicast Route Table The PIM IP Multicast Route Table is used to view information regarding the multicast data route entries in the Switch. To view this window, click Monitoring > PIM Monitor > Browse PIM IP Mutlicast Route Table, as shown below: Figure 8- 50. PIM IP Multicast Route Table window Browse PIM RP-Set Table The following window is used to assess information regarding the Rendezvous Point (RP) Set on the Switch. To view this window, click Monitoring > PIM Monitor > Browse PIM RP-Set Table, as shown below: 456