D-Link DHP-1320 User Manual

D-Link DHP-1320 Manual

Get D-Link DHP-1320 PDF manuals and user guides View all D-Link DHP-1320 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DHP-1320 manual content summary:

  • D-Link DHP-1320 | User Manual - Page 1
  • D-Link DHP-1320 | User Manual - Page 2
    notify any person or organization of such revisions or changes. Manual Revisions Revision 1.0 Date September 01, 2010 Description DHP-1320 Revision A1 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or
  • D-Link DHP-1320 | User Manual - Page 3
    48 Port Forwarding 50 Application Rules 51 QoS Engine 52 Network Filter 53 Access Control 54 Website Filter 57 Inbound Filter 58 Firewall Settings 59 Routing...61 Advanced Wireless Settings 62 Wi-Fi Protected Setup (WPS 63 Advanced Network 65 IPv6...66 D-Link DHP-1320 User Manual ii
  • D-Link DHP-1320 | User Manual - Page 4
    140 Using Windows® 7 140 Configure WPS 143 Using Windows Vista 147 Configure Wireless Security 148 Using Windows® XP 150 Configure WPA-PSK 151 Troubleshooting 153 Wireless Basics 157 What is Wireless 158 Tips...160 Wireless Modes 161 Networking Basics 162 D-Link DHP-1320 User Manual iii
  • D-Link DHP-1320 | User Manual - Page 5
    Table of Contents Check your IP address 162 Statically Assign an IP address 163 Technical Specifications 164 Contacting Technical Support 166 Warranty 167 Registration 173 D-Link DHP-1320 User Manual iv
  • D-Link DHP-1320 | User Manual - Page 6
    DHP-1320 Wireless N PowerLine Router Two Detachable Antennas Ethernet Cable Power Adapter CD-ROM with Manual and Setup Wizard Note: Using a power supply with a different voltage rating than the one included with the DHP-1320 will cause damage and void the warranty for this product. D-Link DHP-1320
  • D-Link DHP-1320 | User Manual - Page 7
    11g wireless clients • 10/100 Ethernet Web-based Configuration Utility Requirements CD Installation Wizard Requirements download the latest version. Computer with the following: • Windows® 7/ Vista® / XP with Service Pack 3 • An installed Ethernet adapter • CD-ROM drive D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 8
    a Quality of Service (QoS) engine that keeps digital phone calls (VoIP) and online gaming smooth and responsive, providing a better Internet experience. TOTAL NETWORK SECURITY The Wireless N PowerLine Router supports all of the latest wireless security features to prevent unauthorized access, be it
  • D-Link DHP-1320 | User Manual - Page 9
    . It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DHP-1320 can securely access corporate networks. • User-friendly Setup Wizard - Through its easy-to-use Web-based user interface, the DHP-1320 lets you control what information is accessible to those on the wireless
  • D-Link DHP-1320 | User Manual - Page 10
    the Reset button restores the router to its original factory default settings. 5 USB USB 1.1/2.0 port for SharePortTM Network and WCN support. 6 Power Button Use this switch to power on/power off the device. 7 Power Receptor Receptor for the supplied power cord. D-Link DHP-1320 User Manual 5
  • D-Link DHP-1320 | User Manual - Page 11
    button will light solid blue for 5 seconds when the device has successfully been added to the network. 2 ENY Button Push this button to establish a secure PowerLine network with other PowerLine AV devices. D-Link DHP-1320 User Manual 6
  • D-Link DHP-1320 | User Manual - Page 12
    PowerLine unit. 5 LAN LEDs (1-3) A solid light indicates a connection to an Ethernet-enabled computer on ports 1-3. This LED blinks during data transmission. 6 USB LED A solid light indicated that the USB device is ready. This LED blinks during data transmission. D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 13
    the Setup Wizard from the D-Link CD, make sure the computer you are running the CD from is connected to the Internet and online or the wizard will not work. If you have disconnected any hardware, re-connect your computer back to the modem and make sure you are online. D-Link DHP-1320 User Manual 8
  • D-Link DHP-1320 | User Manual - Page 14
    to position access points, wireless routers, and computers wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 15
    and click Install Router to start the Quick Router Setup Wizard. Follow the onscreen instructions to install and configure your router. Network Diagram PC Wireless N PowerLine Router (DHP-1320) LAN INTERNET RESET USB ON/OFF 1 2 3 AR RT AC IN Modem INTERNET D-Link DHP-1320 User Manual 10
  • D-Link DHP-1320 | User Manual - Page 16
    ) and then press Enter. When the login window appears, set the user name to Admin and leave the password box blank. Click Log In to continue the setup and use the wizard. Please refer to the page 22 for detailed installation information and advanced features. D-Link DHP-1320 User Manual 11
  • D-Link DHP-1320 | User Manual - Page 17
    and the subnet mask of your network. Click Save Settings to save your settings. Use this new IP address to access the configuration utility of the router in the future. Close the browser and change your computer's IP settings back to the original values as in Step 1. D-Link DHP-1320 User Manual 12
  • D-Link DHP-1320 | User Manual - Page 18
    other Ethernet devices and computers. To configure your wireless network, open a web browser and enter the IP address you assigned to the router. Refer to the Configuration and Wireless Security sections for more information on setting up your wireless network. D-Link DHP-1320 User Manual 13
  • D-Link DHP-1320 | User Manual - Page 19
    For Access Point Mode Room 2 Wireless Router DHP-306AV 1 2 LAN 3 4 RESET INTERNET USB 5V - - - 3A Room 1 Modem INTERNET LAN INTERNET RESET USB ON/OFF 1 2 3 AR RT AC IN DHP-306AV Wireless N PowerLine Router (AP Mode) Room3 Step 1 Move the switch on the back of the DHP-1320 to "AP
  • D-Link DHP-1320 | User Manual - Page 20
    not connect the Wireless N PowerLine Router to an PowerLine devices are electrically rated to operate with the power available in your location. 5. To help prevent against electrical shock, be sure to plug the power cables into properly grounded electrical outlets. D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 21
    AV device to join an existing PowerLine network. PowerLine devices added after the first device will be in the Join State when the ENY Button is pressed. Ungroup State - Hold down the ENY Button for more than 10 seconds to detach the device from its network group. D-Link DHP-1320 User Manual 16
  • D-Link DHP-1320 | User Manual - Page 22
    reboot (all LEDs will turn off and on). When the PowerLine AV LEDs on both devices are steadily lit, the two devices will be networked together. Room A DHP-1320 LAN INTERNET RESET USB ON/OFF 1 2 3 AR RT AC IN DHP-W306AV INTERNET Room B D-Link DHP-1320 User Manual DHP-W306AV Room C 17
  • D-Link DHP-1320 | User Manual - Page 23
    AV LED should start to blink. 4. Wait for the DHP-1320 to reboot (all LEDs will tun off and on). When the PowerLine AV LED on all devices are steadily lit, the DHP-1320 will be connected to the existing network. Room A DHP-1320 Room B DHP-306AV Room C DHP-W306AV D-Link DHP-1320 User Manual 18
  • D-Link DHP-1320 | User Manual - Page 24
    Getting Started The DHP-1320 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. Insert the Quick Router Setup Wizard CD in the CD-ROM drive. The step-by-step instructions that follow are shown
  • D-Link DHP-1320 | User Manual - Page 25
    -browser such as Internet Explorer and enter the IP address of the router (192.168.0.1). Select Admin in the User Name field. Leave the password blank by default. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance. D-Link DHP-1320 User Manual 20
  • D-Link DHP-1320 | User Manual - Page 26
    Connection Setup button if Connection you want to enter your Internet settings without running Option: the Internet Connection Setup Wizard. Refer to "Manual Internet Connection Setup"on page 28 for more information on how to configure your Internet settings manually. D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 27
    Section 3 - Configuration Internet Connection Setup Wizard Click the Internet Connection Setup Wizard button to start the Internet Connection Setup Wizard. D-Link DHP-1320 User Manual 22
  • D-Link DHP-1320 | User Manual - Page 28
    following window appears, summarizing the steps required to complete the Internet Connection Setup Wizard: Click Next to continue. Create a new password and then click Next to continue. Select your time zone from the drop-down menu and then click Next to continue. D-Link DHP-1320 User Manual 23
  • D-Link DHP-1320 | User Manual - Page 29
    you use and then click Next to continue. If you selected DHCP Connection (Dynamic IP Address), you may need to enter the MAC address of the computer that was last be required by some ISPs. The default host name is the device name of the router and may be changed. D-Link DHP-1320 User Manual 24
  • D-Link DHP-1320 | User Manual - Page 30
    computer. The software is no longer needed and will not work through a router. If you selected PPTP, enter your PPTP username and password. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and PPTP server addresses. Click Next to continue. D-Link DHP-1320 User Manual 25
  • D-Link DHP-1320 | User Manual - Page 31
    L2TP username and password. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and L2TP server addresses. Click Next to continue. If you selected Static, enter your network settings supplied by your Internet provider. Click Next to continue. D-Link DHP-1320 User Manual 26
  • D-Link DHP-1320 | User Manual - Page 32
    that the settings are being saved. When the Router has finished saving all the changes, the Setup> Internet window will open. Close your browser window and reopen it to test your Internet connection. It may take a few tries to initially connect to the Internet. D-Link DHP-1320 User Manual 27
  • D-Link DHP-1320 | User Manual - Page 33
    by correcting many common typo mistakes automatically, taking you where you intended to go and saving you valuable time. Disclaimer: D-Link makes no warranty as to the availability, reliability, fuctionality and operation of the Advanced DNS service or its features. D-Link DHP-1320 User Manual 28
  • D-Link DHP-1320 | User Manual - Page 34
    that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 29
  • D-Link DHP-1320 | User Manual - Page 35
    that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 30
  • D-Link DHP-1320 | User Manual - Page 36
    feature, enable Auto-reconnect. DNS Servers: Enter the Primary and Secondary DNS Server Addresses (Static PPPoE only). MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. D-Link DHP-1320 User Manual 31
  • D-Link DHP-1320 | User Manual - Page 37
    that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 32
  • D-Link DHP-1320 | User Manual - Page 38
    - Configuration Manual Internet Connection Setup PPTP Select PPTP (Point-to-Point Tunneling Protocol) from the drop-down menu if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Address Mode: Select Static IP if
  • D-Link DHP-1320 | User Manual - Page 39
    that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 34
  • D-Link DHP-1320 | User Manual - Page 40
    Configuration Manual Internet Connection Setup L2TP Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Address Mode: Select Static if your ISP assigned you the IP address
  • D-Link DHP-1320 | User Manual - Page 41
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DHP-1320 User Manual 36
  • D-Link DHP-1320 | User Manual - Page 42
    want to add a wireless device using Wi-Fi Protected Setup (WPS) and refer to "Add Wireless Device with WPS Wizard" on page 106. If you want to manually configure the wireless settings on your router click Manual Wireless Connection Setup and refer to the next page. D-Link DHP-1320 User Manual 37
  • D-Link DHP-1320 | User Manual - Page 43
    channel setting for the DHP-1320. By default the channel is set to 1. The Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Selection, this option will be greyed out. D-Link DHP-1320 User Manual 38
  • D-Link DHP-1320 | User Manual - Page 44
    20MHz - Select if you are not using any 802.11n wireless clients. This is the default setting. Wireless Security Refer to "Wireless Security" on page 136 for more information regarding wireless security. Mode: Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 39
  • D-Link DHP-1320 | User Manual - Page 45
    Name, IP Address, MAC Address, and Expiration Time. Number of Displays information about the devices that have a Dynamic dynamic DHCP lease from the DHP-1320. The information DHCP Clients: includes the Host Name, IP Address, MAC Address, and Lease Expiration Time. D-Link DHP-1320 User Manual 40
  • D-Link DHP-1320 | User Manual - Page 46
    ). Enable DNS Relay: Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server. Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 41
  • D-Link DHP-1320 | User Manual - Page 47
    DHP-1320. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool. Enable DHCP Check this box to enable the DHCP server on your router D-Link DHP-1320 User Manual 42
  • D-Link DHP-1320 | User Manual - Page 48
    . Dynamic DHCP In this section you can see what LAN devices are currently leasing IP addresses. Clients: When you have finished configuring the new DHCP Reservation, click the Save Settings button at the top or bottom of the window to activate your reservations. D-Link DHP-1320 User Manual 43
  • D-Link DHP-1320 | User Manual - Page 49
    Section 3 - Configuration USB Settings In this section you may configure your USB port. You can select several configurations to choose from such as Share Port and WCN Configuration. D-Link DHP-1320 User Manual 44
  • D-Link DHP-1320 | User Manual - Page 50
    Section 3 - Configuration PLC Settings (Router Mode) This section will show you how to configure your new D-Link PowerLine AV using the web-based configuration utility. D-Link DHP-1320 User Manual 45
  • D-Link DHP-1320 | User Manual - Page 51
    Name: Type a name you wish to use to identify a specific PowerLine AV device. For example, "Jack's room". Password: The Password is used to verify that you are authorized to perform changes on a device. You can find the Password printed on the back of your device. D-Link DHP-1320 User Manual 46
  • D-Link DHP-1320 | User Manual - Page 52
    device is powered on. Qos Settings: You can configure your PowerLine AV devices to give priority to powerline network traffic accordingly. Enter the name, MAC Address, and priority level. Mac Address: You can find the MAC address printed on the back of your device. D-Link DHP-1320 User Manual 47
  • D-Link DHP-1320 | User Manual - Page 53
    the LAN network. The DHP-1320 is also capable of port-redirection, meaning that incoming traffic to a particular port may be redirected to a different port on the server computer. For a list of ports for common applications, please visit http://support.dlink.com/faq. D-Link DHP-1320 User Manual 48
  • D-Link DHP-1320 | User Manual - Page 54
    on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the Computer Filter page. Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 49
  • D-Link DHP-1320 | User Manual - Page 55
    on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the Computer Name page. Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 50
  • D-Link DHP-1320 | User Manual - Page 56
    with the DHP1320. If on the Internet side that will be used to access the application. You may define a single port or service to always be enabled. You can create your own times in the Tools > Schedules section. Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 57
    's often define speed as a download/upload pair. For example, 1.5Mbits/284Kbits. Using this example, you would enter 284. Alternatively you can test your uplink speed with a service such as www.dslreports.com. Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 52
  • D-Link DHP-1320 | User Manual - Page 58
    the MAC address on a computer, please refer to the Networking Basics section in this manual. DHCP Client List: Select a DHCP client from the Computer Name drop down menu and click
  • D-Link DHP-1320 | User Manual - Page 59
    time or dates, and/or block access from applications like P2P utilities or games. Add Policy: Check the Enable Access Control check box and click the Add Policy button to start the Access Control Wizard. Click Next to continue with the wizard. Access Control Wizard D-Link DHP-1320 User Manual 54
  • D-Link DHP-1320 | User Manual - Page 60
    the drop-down menu and then click Next to continue. Enter the following information and then click Next to continue. • Address Type - Select IP address, MAC address, or Other Machines. • IP Address - Enter the IP address of the computer you want to apply the rule to. D-Link DHP-1320 User Manual 55
  • D-Link DHP-1320 | User Manual - Page 61
    IP address. Dest IP End - Enter the ending IP address. Protocol - Select the protocol. Dest Port Start - Enter the starting port number. Dest Port End - Enter the ending port number. To enable web logging, click Enable. Click Save to save the access control rule. D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 62
    Web Select ALLOW computers access to ONLY these sites, or Filtering: DENY computers access to ONLY these sites from the drop-down menu. Website URL: Enter the keywords or URLs that you want to allow or block. Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 57
  • D-Link DHP-1320 | User Manual - Page 63
    . Remote IP Enter the starting IP address. Enter 0.0.0.0 if you Start: do not want to specify an IP range. Remote IP Enter the ending IP address. Enter 255.255.255.255 End: if you do not want to specify and IP range. Add: Click the Add button to apply your settings. D-Link DHP-1320 User Manual 58
  • D-Link DHP-1320 | User Manual - Page 64
    the IP address of the outgoing connection. Address + Port Restriction - Incoming traffic must match the IP address and port of the outgoing connection. Enable Anti-Spoof Enable this option to provide protection from certain kinds Checking: of "spoofing" attacks. D-Link DHP-1320 User Manual 59
  • D-Link DHP-1320 | User Manual - Page 65
    the LAN that you want to have unrestricted Internet communication. If this computer obtains its IP address automatically using DHCP, be sure to make a static reservation on the System > Network Settings page so that the IP address of the DMZ machine does not change. D-Link DHP-1320 User Manual 60
  • D-Link DHP-1320 | User Manual - Page 66
    IP: Enter the address of the host or network you wish to access. Netmask: This field identifies the portion of the destination IP in use. Gateway: The IP address of the router will be displayed here. Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 61
  • D-Link DHP-1320 | User Manual - Page 67
    for your wireless clients. Short Guard Check this box to reduce the guard interval time therefore increasing the data capacity. However, it's less reliable and may create Interval: higher data loss. Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 62
  • D-Link DHP-1320 | User Manual - Page 68
    PIN. Reset PIN to Click this button to restore the default PIN of the router. Default: Generate New Click this button to create a random number that is a PIN: valid PIN. This becomes the router's PIN. You can then copy this PIN to the user interface of the registrar. D-Link DHP-1320 User Manual 63
  • D-Link DHP-1320 | User Manual - Page 69
    wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected Setup button on the device. The router acts as a registrar for the network, although other devices may act as a registrar as well. Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 70
    and peripherals. Enable WAN Ping Unchecking the box will not allow the DHP-1320 to Response: respond to pings. Blocking the Ping may provide some extra traffic to pass through the router from the Internet. Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 65
  • D-Link DHP-1320 | User Manual - Page 71
    Section 3 - Configuration IPv6 Use the IPv6 window to configure the mode that the Router will use to access an IPv6 Internet connection. My IPv6 Use the drop-down menu to select the IPv6 Connection is: Internet Connection mode. D-Link DHP-1320 User Manual 66
  • D-Link DHP-1320 | User Manual - Page 72
    Internet Settings: provider (ISP). LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN Address Use this section to configure the IPv6 autoconfiguration Autoconfiguration settings. Settings: Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 67
  • D-Link DHP-1320 | User Manual - Page 73
    - Configuration IPv6 Static IPv6 - Stateless To configure the Router to use a Static IPv6 Stateless connection, configure the Router Enter the Router Advertisement Lifetime (in minutes). Advertisement Lifetime: Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 74
    Section 3 - Configuration IPv6 Static IPv6 - Stateful To configure the Router to use a Static IPv6 Stateful connection, configure the parameters in the LAN Address IPv6 Address Lifetime (in minutes). Lifetime: Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 69
  • D-Link DHP-1320 | User Manual - Page 75
    your Router will router. Settings: LAN IPv6 Displays the Router's LAN Link-Local Address. Link‑Local Address: Address Use this section to configure the IPv6 autoconfiguration Autoconfiguration settings. Settings: Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 76
    Autoconfiguration (Stateless/DHCPv6) - Stateless To configure the Router to use a Static IPv6 Stateless connection, configure the Router Enter the Router Advertisement Lifetime (in minutes). Advertisement Lifetime: Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 77
    3 - Configuration IPv6 Autoconfiguration (Stateless/DHCPv6) - Stateful To configure the Router to use a Static IPv6 Stateful connection, configure the parameters in the LAN Lifetime (in minutes). Lifetime: Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 72
  • D-Link DHP-1320 | User Manual - Page 78
    Router will use a 6 to 4 tunnel to connect to the Internet. Primary DNS Enter the DNS Address supplied by your Internet provider Address: (ISP). LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 79
    - Configuration IPv6 6to4 - Stateless To configure the Router to use an IPv6 to IPv4 tunnel stateless autoconfiguration Router Enter the Router Advertisement Lifetime (in minutes). Advertisement Lifetime: Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 80
    Section 3 - Configuration IPv6 6to4 - Stateful To configure the Router to use an IPv6 to IPv4 tunnel stateful autoconfiguration connection, configure the parameters Address Lifetime (in minutes). Lifetime: Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 75
  • D-Link DHP-1320 | User Manual - Page 81
    Section 3 - Configuration IPv6 6rd My IPv6 Select 6rd from the drop-down menu. Connection: 6rd IPv6 Prefix: Enter the settings supplied by your Internet provider (ISP). LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. D-Link DHP-1320 User Manual 76
  • D-Link DHP-1320 | User Manual - Page 82
    feature. IPv6 address assignment: Autoconfiguration Select the Stateless option from the drop-down menu. Type: Router Enter the Router Advertisement Lifetime (in minutes). Advertisement Lifetime: Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 77
  • D-Link DHP-1320 | User Manual - Page 83
    range for Range End: your local computers. IPv6 Address Enter the IPv6 Address Lifetime (in minutes). Lifetime: Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 78
  • D-Link DHP-1320 | User Manual - Page 84
    server address. Primary/Secondary Enter the primary and secondary DNS server addresses. DNS Address: LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. D-Link DHP-1320 User Manual 79
  • D-Link DHP-1320 | User Manual - Page 85
    Enable automatic Check to enable the IPv6 address assignment IPv6 address feature. assignment: Autoconfiguration Select Stateless. Refer to the previous page for Type: Stateful. Router Enter the Router Advertisement Lifetime (in Advertisement minutes). Lifetime: D-Link DHP-1320 User Manual 80
  • D-Link DHP-1320 | User Manual - Page 86
    Enter the end IPv6 Address for the DHCPv6 range for your Range End: local computers. IPv6 Address Enter the IPv6 Address Lifetime (in minutes). Lifetime: D-Link DHP-1320 User Manual 81
  • D-Link DHP-1320 | User Manual - Page 87
    from the My IPv6 Connection is drop-down menu if your Router will use the IPv6 link local method to connect to the Internet. LAN IPv6 Displays the LAN IPv6 Link-Local address of the router. Address Settings: Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 82
  • D-Link DHP-1320 | User Manual - Page 88
    you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU. Maximum Idle Enter a maximum idle time during which the Internet connection Time: is maintained during inactivity. To disable this feature, enable Auto-reconnect. D-Link DHP-1320 User Manual 83
  • D-Link DHP-1320 | User Manual - Page 89
    IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN Link-Local Displays the Router's LAN Link-Local Address. Address: Enable Check to enable the Autoconfiguration feature. . End: IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes). D-Link DHP-1320 User Manual 84
  • D-Link DHP-1320 | User Manual - Page 90
    the cost of using this route. A value 1 is the lowest cost and 15 is the highest cost. Interface: Select the interface which the IP packet must use to transit out of the router when this route is used. Gateway: The IP address of the router will be displayed here. D-Link DHP-1320 User Manual 85
  • D-Link DHP-1320 | User Manual - Page 91
    the Administrator Login Name. Password: The administrator can make changes to the settings. User Password: Enter the new password for the User login. If you login as the User, you can only see the settings, but cannot change them. Gateway Name: Enter a name for your DHP-1320 Router. Enable Enables
  • D-Link DHP-1320 | User Manual - Page 92
    allows you to configure, update, and maintain the correct time manually. To Date Manually: configure the time manually, use the drop-down menus to select the appropriate Year, Month, Day, Hour, Minute, and Second. Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 93
    the router logs to a SysLog Server. to SysLog Server: SysLog Server The address of the SysLog server that will be used to IP Address: send the logs. You may also select your computer from the drop-down menu (only if receiving an IP address from the router via DHCP). D-Link DHP-1320 User Manual 88
  • D-Link DHP-1320 | User Manual - Page 94
    . Password: Enter the password associated with the account. Re-type the password associated with the account. Send Mail Now: Click this button to send a test email from the Router to go to Tools > Schedules. Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 89
  • D-Link DHP-1320 | User Manual - Page 95
    the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save button above. Reboot Device: Click to reboot the router. D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 96
    find out if there is an updated firmware; if so, download the new firmware to your hard drive. Firmware After you have downloaded the new firmware, click Upgrade: Browse to locate the firmware update on your hard drive. Click Upload to complete the firmware upgrade. D-Link DHP-1320 User Manual 91
  • D-Link DHP-1320 | User Manual - Page 97
    you registered with your DDNS service provider. Username or Key: Enter the Username for your DDNS account. Timeout: Enter a time in (hours). Status: Displays the current connection status to your DDNS server. Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 92
  • D-Link DHP-1320 | User Manual - Page 98
    The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to Ping, and click Ping. Click Stop to stop sending Ping packets IPv6 Ping The The results of your Ping/IPv6 Ping attempts will be displayed here. D-Link DHP-1320 User Manual 93
  • D-Link DHP-1320 | User Manual - Page 99
    can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to 8pm, you could create a schedule selecting Mon, Tue, Wed . Click the Edit icon List: to make changes or click the Delete icon to remove the schedule. D-Link DHP-1320 User Manual 94
  • D-Link DHP-1320 | User Manual - Page 100
    wireless settings such as SSID and Channel. LAN Computer: Displays computers and other devices which are connected to the router via Ethernet, and that are receiving an IP address assigned by the router CDHCP). IGMP Multicast Displays the Multicast Group IP address. Memberships: D-Link DHP-1320
  • D-Link DHP-1320 | User Manual - Page 101
    page of the Router logs. Next: Click this button to view the next page of the Router logs. Clear: Clears all of the log contents. Email Now: Click this button to open the Tools > Email Settings screen so that you can change the Email configuration for sending logs. D-Link DHP-1320 User Manual 96
  • D-Link DHP-1320 | User Manual - Page 102
    WAN, LAN ports and the 802.11n/g (2.4GHz) wireless band. The traffic counter will reset if the device is rebooted. Refresh: Click the Refresh button to refresh the Router's traffic statistics. Reset: Click the Reset button to reset the Router's traffic statistics. D-Link DHP-1320 User Manual 97
  • D-Link DHP-1320 | User Manual - Page 103
    Internet Sessions The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. D-Link DHP-1320 User Manual 98
  • D-Link DHP-1320 | User Manual - Page 104
    Section 3 - Configuration Routing Table This page displays the routing details configured for your router. D-Link DHP-1320 User Manual 99
  • D-Link DHP-1320 | User Manual - Page 105
    Section 3 - Configuration Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless clients. D-Link DHP-1320 User Manual 100
  • D-Link DHP-1320 | User Manual - Page 106
    Section 3 - Configuration IPv6 The IPv6 page displays a summary of the Router's IPv6 settings and lists the IPv6 address and host name of any IPv6 clients. D-Link DHP-1320 User Manual 101
  • D-Link DHP-1320 | User Manual - Page 107
    Section 3 - Configuration Support D-Link DHP-1320 User Manual 102
  • D-Link DHP-1320 | User Manual - Page 108
    Section 4 - Security Wireless Connection Setup Wizard To run the Wireless Connection Setup Wizard, click the Wireless Connection Setup Wizard button in the Setup>Wireless Settings window. D-Link DHP-1320 User Manual 103
  • D-Link DHP-1320 | User Manual - Page 109
    . Manually: Select this option to manually enter your network key and click Next. If you selected Automatically, the summary window will display your settings. Write down the security key and enter this on your wireless clients. Click Save to save your settings. D-Link DHP-1320 User Manual 104
  • D-Link DHP-1320 | User Manual - Page 110
    Wireless Security Password you would like to use for your wireless network and click Next to proceed to the next window. The summary window will display your settings. Write down the security key and enter this on your wireless clients. Click Save to save your settings. D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 111
    this on your wireless clients. PIN: Select this option to use PIN method. In order to use this method you must know the wireless client's 8 digit PIN and click Connect. PBC: Select this option to use PBC (Push Button) method to add a wireless client. Click Connect. D-Link DHP-1320 User Manual 106
  • D-Link DHP-1320 | User Manual - Page 112
    Explorer and enter http://dlinkrouter or the IP address of the router (192.168.0.1). Select Admin in the User Name field. Leave the password blank by default. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance. D-Link DHP-1320 User Manual 107
  • D-Link DHP-1320 | User Manual - Page 113
    Setup Wizard to begin. Click Next to continue your wireless network setup. Select one of the two configuration methods. Select WPS if your wireless device support WPS and click Next to continue to the next step. Press down the Push Button on the wireless device within 116 seconds. D-Link DHP-1320
  • D-Link DHP-1320 | User Manual - Page 114
    setup your network manually, select Manual and click Next to continue. Enter the SSID (Service Set Identifier). The SSID is the name of your wireless setup is complete. You will be given a detailed summary of your wireless security settings. Click Save to continue. D-Link DHP-1320 User Manual 109
  • D-Link DHP-1320 | User Manual - Page 115
    boot-up). Indicates the channel setting for the DHP-1320. Wireless The channel can be changed to fit the channel setting Channel for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out. D-Link DHP-1320 User Manual 110
  • D-Link DHP-1320 | User Manual - Page 116
    It is still possible to change wireless network settings with Manual Wireless Network Setup, Wireless Network Setup Wizard, or an existing external WLAN Manager user. Please refer to page 121. Save Settings: Click Save Settings to save and activate the new changes. D-Link DHP-1320 User Manual 111
  • D-Link DHP-1320 | User Manual - Page 117
    obtain an IP address on the LAN/private network. Device Name: Enter the Device Name of the AP. Changing the Device Name is recommended if there is more than one D-Link device within the subnet. Save Settings: Click Save Settings to save and activate the new changes. D-Link DHP-1320 User Manual 112
  • D-Link DHP-1320 | User Manual - Page 118
    the AP into your web browser to access it instead of IP address for configuration. If you are using the device name to connect, make sure that your PC and your DHP1320 are on the same network. Save Settings: Click Save Settings to save and activate the new changes. D-Link DHP-1320 User Manual 113
  • D-Link DHP-1320 | User Manual - Page 119
    only from the drop-down menu. Connection is: LAN IPv6 Address This section displays the IPv6 address of the router. settings: My IPv6 Select static IPv6 from the drop-down menu. Connection is: LAN IPv6 Enter the LAN (local) IPv6 address for the router. Address: D-Link DHP-1320 User Manual 114
  • D-Link DHP-1320 | User Manual - Page 120
    Section 3 - Configuration My IPv6 Select Autoconfiguration (Stateless/DHCPv6) from the Connection: drop down menu. IPv6 DNS Select Obtain IPv6 DNS Server automatically or enter a Settings: specific DNS Server address. D-Link DHP-1320 User Manual 115
  • D-Link DHP-1320 | User Manual - Page 121
    Section 3 - Configuration Configuration PLC Settings - AP Mode This section will show you how to configure your new D-Link PowerLine AV using the web-based configuration utility. D-Link DHP-1320 User Manual 116
  • D-Link DHP-1320 | User Manual - Page 122
    back of your device. Member List: This section provides information on the PowerLine AV devices in your PowerLine network, or any devices that were previously connected but it are currently disconnected. Link Rate: Displays the device's current data rate in Mbps. D-Link DHP-1320 User Manual 117
  • D-Link DHP-1320 | User Manual - Page 123
    device is powered on. QoS Setting: You can configure your PowerLine AV devices to give priority to powerline network traffic accordingly. Enter the name, MAC Address, and priority level. Mac Address: You can find the MAC address printed on the back of your device. D-Link DHP-1320 User Manual 118
  • D-Link DHP-1320 | User Manual - Page 124
    or you will not be able to access the configuration utility once you click Save Settings. Wireless Client List: Select a DHCP client from the drop-down menu and click to copy the MAC Address. Save Settings: Click Save Settings to save and activate the new changes. D-Link DHP-1320 User Manual 119
  • D-Link DHP-1320 | User Manual - Page 125
    this feature will improve the quality of video and ice applications for your wireless clients. Short GI: Check this box to reduce the guard interval time therefore increasing the data capacity. However, this setting less reliable and may create higher data loss. D-Link DHP-1320 User Manual 120
  • D-Link DHP-1320 | User Manual - Page 126
    value of the access point's PIN. Generate New Create a random number that is a valid PIN: PIN. This becomes the access point's PIN. You can then copy this PIN to the user interface of the user. Reset PIN to Restores the default PIN of the access Default: point. D-Link DHP-1320 User Manual 121
  • D-Link DHP-1320 | User Manual - Page 127
    Section 3 - Configuration Add Wireless Device with WPS Adding a Wireless Device Using the PIN Method Please select one of the following configuration methods and click Next to continue. D-Link DHP-1320 User Manual 122
  • D-Link DHP-1320 | User Manual - Page 128
    Adding a Wireless Device Using the PBC Method Select PBC to use Push Button Configuration in order to connect to your network. Click Connect to continue. Press the WPS Button on the wireless device that you are adding to your network to complete the setup. D-Link DHP-1320 User Manual 123
  • D-Link DHP-1320 | User Manual - Page 129
    Section 3 - Configuration User Limit Settings In this section, you may set a limit to the number of wireless clients to prevent heavy wireless traffic. D-Link DHP-1320 User Manual 124
  • D-Link DHP-1320 | User Manual - Page 130
    numbers from a distorted image displayed on the screen to prevent online hackers and unauthorized users from gaining access to your device's configuration. This feature is disabled by default. Save Settings: Click Save Settings to save and activate the new changes. D-Link DHP-1320 User Manual 125
  • D-Link DHP-1320 | User Manual - Page 131
    Enter the NTP server or select one from the drop Used: down menu. Manual: To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Set Time. You can also click Copy Your Computer's Time Settings. D-Link DHP-1320 User Manual 126
  • D-Link DHP-1320 | User Manual - Page 132
    router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save button above. Reboot Device: Click to reboot the router. D-Link DHP-1320 User Manual 127
  • D-Link DHP-1320 | User Manual - Page 133
    of the access point from this page. Make sure the firmware you would like to use is on the local hard drive of your computer. Click Browse... to locate the firmware file to be used for the update. Please check the D-Link support site for firmware updates at http://support.dlink.com. You can download
  • D-Link DHP-1320 | User Manual - Page 134
    , if you would like to restrict web access to Mon-Fri from 3:00 p.m. to changes, click Save to save Schedule the schedule rule. Rules List: The list of schedules will be listed here. Click the Edit icon to make changes or click the Delete icon to remove the schedule. D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 135
    information. General: Displays the access point's time and firmware version. LAN: Displays the MAC address and the private (local) IP settings for the access point. Wireless LAN: Displays the wireless MAC address and your wireless settings such as SSID and Channel. D-Link DHP-1320 User Manual 130
  • D-Link DHP-1320 | User Manual - Page 136
    Section 3 - Configuration Logs The DHP-W306AV keeps a running log of events and activities occurring on the AP. If the AP is rebooted, the logs are automatically cleared. You can save the you can configure the log settings. Refresh: This button refreshes the log. D-Link DHP-1320 User Manual 131
  • D-Link DHP-1320 | User Manual - Page 137
    it. You can view the amount of packets that pass through the LAN and wireless portions of the network. The traffic counter will reset if the access point is rebooted. Refresh Statistics: Click the Refresh button to refresh the Access Point's traffic statistics. D-Link DHP-1320 User Manual 132
  • D-Link DHP-1320 | User Manual - Page 138
    Section 3 - Configuration Wireless This section allows you to view the wireless clients that are connected to your wireless access point. D-Link DHP-1320 User Manual 133
  • D-Link DHP-1320 | User Manual - Page 139
    Section 3 - Configuration IPv6 This section will display all of your IPv6 Internet and network connection details. D-Link DHP-1320 User Manual 134
  • D-Link DHP-1320 | User Manual - Page 140
    Section 3 - Configuration Support D-Link DHP-1320 User Manual 135
  • D-Link DHP-1320 | User Manual - Page 141
    on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DHP-1320 User Manual 136
  • D-Link DHP-1320 | User Manual - Page 142
    you would like to use in the WEP Key field. 8. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the router. D-Link DHP-1320 User Manual 137
  • D-Link DHP-1320 | User Manual - Page 143
    like to use in the Network Key field. 8. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the router. D-Link DHP-1320 User Manual 138
  • D-Link DHP-1320 | User Manual - Page 144
    to RADIUS Server IP Address enter the IP Address of your RADIUS server. 8. Next to Port, enter the port you are using with your RADIUS server. 1812 is the default port. 9. Next to Shared Secret, enter the security key. 10. Click Save Settings to save your settings. D-Link DHP-1320 User Manual 139
  • D-Link DHP-1320 | User Manual - Page 145
    If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless Icon D-Link DHP-1320 User Manual 140
  • D-Link DHP-1320 | User Manual - Page 146
    get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DHP-1320 User Manual 141
  • D-Link DHP-1320 | User Manual - Page 147
    connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DHP-1320 User Manual 142
  • D-Link DHP-1320 | User Manual - Page 148
    WPS The WPS feature of the router can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature of the router: 1. Click the Start button and select Computer from the Start menu. 2. Click the Network option. D-Link DHP-1320 User Manual 143
  • D-Link DHP-1320 | User Manual - Page 149
    Section 5 - Connecting to a Wireless Network 3. Double-click the DHP-1320. 4. Input the WPS PIN number (displayed in the WPS window on the Router's LCD screen or in the Setup > Wireless Setup menu in the Router's Web UI) and click Next. D-Link DHP-1320 User Manual 144
  • D-Link DHP-1320 | User Manual - Page 150
    Section 5 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DHP-1320 User Manual 145
  • D-Link DHP-1320 | User Manual - Page 151
    The following window informs you that WPS on the DHP-1320 has been setup successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DHP-1320 User Manual 146
  • D-Link DHP-1320 | User Manual - Page 152
    . Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DHP-1320 User Manual 147
  • D-Link DHP-1320 | User Manual - Page 153
    . 1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DHP-1320 User Manual 148
  • D-Link DHP-1320 | User Manual - Page 154
    that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DHP-1320 User Manual 149
  • D-Link DHP-1320 | User Manual - Page 155
    . Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DHP-1320 User Manual 150
  • D-Link DHP-1320 | User Manual - Page 156
    the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DHP-1320 User Manual 151
  • D-Link DHP-1320 | User Manual - Page 157
    . Enter the WPA-PSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DHP-1320 User Manual 152
  • D-Link DHP-1320 | User Manual - Page 158
    . Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows® XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DHP-1320 User Manual 153
  • D-Link DHP-1320 | User Manual - Page 159
    to hold the button down for 5 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the password box empty. D-Link DHP-1320 User Manual 154
  • D-Link DHP-1320 | User Manual - Page 160
    Section 6 - Troubleshooting 3. Why can't I connect to certain sites or send and receive emails when connecting through my router? If you are having a problem sending or receiving email, the value to account for the various TCP/IP headers. For example, lets say that D-Link DHP-1320 User Manual 155
  • D-Link DHP-1320 | User Manual - Page 161
    Click on Setup and then click Manual Configure. • To change the MTU enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DHP-1320 User Manual 156
  • D-Link DHP-1320 | User Manual - Page 162
    . Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. D-Link DHP-1320 User Manual 157
  • D-Link DHP-1320 | User Manual - Page 163
    headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it's for home, office, business, D-Link has a wireless solution for it. D-Link DHP-1320 User Manual 158
  • D-Link DHP-1320 | User Manual - Page 164
    house • Simple and easy to use Small Office and Home Office • Stay on top of everything at home as you would at office • Remotely access your office network from home • Share Internet connection and printer with multiple computers • No need to dedicate office space D-Link DHP-1320 User Manual 159
  • D-Link DHP-1320 | User Manual - Page 165
    on same frequency. Security Don't let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set it up. D-Link DHP-1320 User Manual 160
  • D-Link DHP-1320 | User Manual - Page 166
    an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 167
    the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 168
    Default Gateway the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DHP-1320 User
  • D-Link DHP-1320 | User Manual - Page 169
    factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. 2 Frequency Range varies depending on country's regulation D-Link DHP-1320 User Manual 164
  • D-Link DHP-1320 | User Manual - Page 170
    max) 40MHz Channel: • 1Nss: 135/150 Mbps (max) • 2Nss: 270/300 Mbps (max) IEEE 802.11g: • 54Mbps • 48Mbps • 24Mbps • 18Mbps • 11Mbps • 9Mbps • 36Mbps • 12Mbps • 6Mbps Wireless Frequency Range2 (North America) • 2.412GHz to 2.462GHz (802.11g/n) Warranty • 1 Year D-Link DHP-1320 User Manual 165
  • D-Link DHP-1320 | User Manual - Page 171
    asked questions and answers to technical issues. For customers within the United States: Phone Support: (877) 453-5465 Internet Support: http://support.dlink.com For customers within Canada: Phone Support: (800) 361-5265 Internet Support: http://support.dlink.ca D-Link DHP-1320 User Manual 166
  • D-Link DHP-1320 | User Manual - Page 172
    the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DHP-1320 User Manual 167
  • D-Link DHP-1320 | User Manual - Page 173
    Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price product to the original purchase point based on its return obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will dlink.com/. D-Link DHP-1320 User Manual 168
  • D-Link DHP-1320 | User Manual - Page 174
    include any manuals or accessories in the shipping package. DLink will only firmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link Link DHP-1320 User Manual 169
  • D-Link DHP-1320 | User Manual - Page 175
    from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright ©2008 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link DHP-1320 User Manual 170
  • D-Link DHP-1320 | User Manual - Page 176
    and used in accordance with the instructions, may cause harmful interference to . FCC Caution: Any changes or modifications not expressly approved firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DHP-1320 User Manual
  • D-Link DHP-1320 | User Manual - Page 177
    End users must follow the specific operating instructions for satisfying RF exposure compliance. This prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. Règlement d'Industry Canada Les conditions de fonctionnement érique. D-Link DHP-1320 User Manual 172
  • D-Link DHP-1320 | User Manual - Page 178
    Appendix F - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 September 28, 2010 D-Link DHP-1320 User Manual 173
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178