D-Link DIR-130 Product Manual

D-Link DIR-130 - Broadband VPN Router Manual

Get D-Link DIR-130 - Broadband VPN Router PDF manuals and user guides
UPC - 790069300523
View all D-Link DIR-130 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DIR-130 manual content summary:

  • D-Link DIR-130 | Product Manual - Page 1
  • D-Link DIR-130 | Product Manual - Page 2
    10). Section 4 - "Troubleshooting" explains how to resolve common issues (page 56). Section 5 - "Appendix" contains networking basics, technical specifications, technical support information, warranty, GNU general public license, and registration information (page 60). D-Link DIR-130 User Manual 
  • D-Link DIR-130 | Product Manual - Page 3
    of such revisions or changes. Manual Revisions Revision 1.0 Date February 8, 2007 1.1 September 5, 2007 Description • DIR-130 Revision A1 with firmware version 1.00 • Updated for firmware version 1.10 • Added Windows Vista™ support Trademarks D-Link and the D-Link logo are trademarks or
  • D-Link DIR-130 | Product Manual - Page 4
    36 Firewall Rules 37 Advanced Network Settings 38 UPnP 38 WAN Ping Respond 38 WAN Port Speed 38 Routing 39 Certificates 40 User Groups 41 Administrator Settings 42 Change Password 42 Remote Management 42 Time and Date 43 System Settings 44 Update Firmware 45 D-Link DIR-130 User Manual
  • D-Link DIR-130 | Product Manual - Page 5
    55 Troubleshooting 56 Networking Basics 60 Check your IP address 60 Statically Assign an IP address 61 Technical Specifications 63 Default Factory Settings 64 Contacting Technical Support 65 Warranty 66 GNU/Linux GPL 71 GNU General Public License 72 Registration 78 D-Link DIR-130 User
  • D-Link DIR-130 | Product Manual - Page 6
    PPraocdkuacgteOCvoenrtevnietsw D-Link DIR-130 8-port VPN Router Power Adapter Ethernet Cable CD-ROM Note: Using a power supply with a different voltage rating than the one included with the DIR-130 will cause damage and void the warranty for this product. D-Link DIR-130 User Manual 
  • D-Link DIR-130 | Product Manual - Page 7
    , or Linux-based operating system • An installed Ethernet adapter Web-based Configuration Utility Requirements Browser Requirements: or higher Windows® Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. D-Link DIR-130 User Manual 
  • D-Link DIR-130 | Product Manual - Page 8
    Concurrent Sessions - The DIR-130 can pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-130 can securely access corporate networks. • User-friendly Setup Wizard - Through the easy-to-use web-based user interface, the DIR-130 allows you to
  • D-Link DIR-130 | Product Manual - Page 9
    devices such as computers, switches, and hubs. Reset Pressing the Reset button restores the router to its original factory default settings. D-Link DIR-130 User Manual Internet Port The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL modem. Power Receptor
  • D-Link DIR-130 | Product Manual - Page 10
    Ethernet-enabled computer on ports 1-8. This LED blinks during data transmission. Power LED A solid light indicates a proper connection to the power supply. Internet LED A solid light indicates connection on the Internet port. This LED blinks during data transmission. D-Link DIR-130 User Manual
  • D-Link DIR-130 | Product Manual - Page 11
    your ISP to change connection types (USB to Ethernet). If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet. D-Link DIR-130 User Manual 
  • D-Link DIR-130 | Product Manual - Page 12
    The power light, Internet light, and the LAN light (the port that your computer is plugged into) should be lit. If not, make sure your computer, modem, and router are powered on and verify the cable connections are correct. 9. Refer to page 10 to configure your router. D-Link DIR-130 User Manual 
  • D-Link DIR-130 | Product Manual - Page 13
    and the subnet mask of your network. Click Save Settings to save your settings. Use this new IP address to access the configuration utility of the router in the future. Close the browser and change your computer's IP settings back to the original values as in Step 1. D-Link DIR-130 User Manual 
  • D-Link DIR-130 | Product Manual - Page 14
    network. 7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug anything into the Internet port of the D-Link router. 8. You may now use the other 7 LAN ports to connect other Ethernet devices and computers. D-Link DIR-130 User Manual 
  • D-Link DIR-130 | Product Manual - Page 15
    the IP address of the router (192.168.0.1). Enter admin as the User name field and enter the password in the Password field. Leave the password blank by default. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance. D-Link DIR-130 User Manual 10
  • D-Link DIR-130 | Product Manual - Page 16
    Section 3 - Configuration Setup Wizard You may click Setup Wizard to quickly configure your router. If you want to enter your settings without running the wizard, click Manual Configure and skip to page 16. Click Launch Internet Connection Setup Wizard to begin. D-Link DIR-130 User Manual 11
  • D-Link DIR-130 | Product Manual - Page 17
    Section 3 - Configuration Click Next to continue. Create a new password and then click Next to continue. Select your time zone from the drop-down menu and then click Next to continue. Select the type of Internet connection you use and then click Next to continue. D-Link DIR-130 User Manual 12
  • D-Link DIR-130 | Product Manual - Page 18
    DNS server addresses. Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. If you selected PPTP, enter your PPTP username and password. Click Next to continue. D-Link DIR-130 User Manual 13
  • D-Link DIR-130 | Product Manual - Page 19
    Section 3 - Configuration If you selected L2TP, enter your L2TP username and password. Click Next to continue. If you selected Static, enter your network settings down menu. You will also need to enter your Big Pond username and password. Click Next to continue. D-Link DIR-130 User Manual 14
  • D-Link DIR-130 | Product Manual - Page 20
    . Click Connect to save your settings. Once the router is finished rebooting, click Continue. Please allow 1-2 minutes to connect. Close your browser window and reopen it to test your Internet connection. It may take a few tries to initially connect to the Internet. D-Link DIR-130 User Manual 15
  • D-Link DIR-130 | Product Manual - Page 21
    MAC address of your Ethernet card. DNS Addresses: Enter the Primary and Secondary DNS server IP address(es) assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU. D-Link DIR-130 User Manual 16
  • D-Link DIR-130 | Product Manual - Page 22
    feature, enable Auto-reconnect. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. Connect Mode: Select either Always-on, On-Demand, or Manual. D-Link DIR-130 User Manual 17
  • D-Link DIR-130 | Product Manual - Page 23
    , enable Time: Auto-reconnect. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1450 is the default MTU. Connect Mode: Select either Always-on, On-Demand, or Manual. D-Link DIR-130 User Manual 18
  • D-Link DIR-130 | Product Manual - Page 24
    feature, enable Auto-reconnect. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1450 is the default MTU. Connect Mode: Select either Always-on, On-Demand, or Manual. D-Link DIR-130 User Manual 19
  • D-Link DIR-130 | Product Manual - Page 25
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-130 User Manual 20
  • D-Link DIR-130 | Product Manual - Page 26
    address of your Ethernet card. DNS Servers: The DNS server information will be supplied by your ISP (Internet Service Provider.) MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU. D-Link DIR-130 User Manual 21
  • D-Link DIR-130 | Product Manual - Page 27
    Manual. WAN Physical In most cases, select Dynamic PPPoE. Select Static PPPoE if your ISP assigned you the IP address, subnet mask, gateway, Setting: and DNS server addresses. DNS Addresses: Enter the Primary and Secondary DNS Server Addresses (Static PPPoE only). D-Link DIR-130 User Manual 22
  • D-Link DIR-130 | Product Manual - Page 28
    Static IP only). Gateway: Enter the Gateway Address provided by your ISP (Static IP only) Clone MAC Setting: Click the Clone MAC Address button to copy the MAC Address from your PC. DNS Setting: Enter the Primary and Secondary DNS Server Addresses (Static IP only). D-Link DIR-130 User Manual 23
  • D-Link DIR-130 | Product Manual - Page 29
    The default subnet mask is Mask: 255.255.255.0. Local Domain Name: Enter the Domain name (optional). Enable DNS Relay: Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server. D-Link DIR-130 User Manual
  • D-Link DIR-130 | Product Manual - Page 30
    . Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. DHCP Lease The length of time for the IP address lease. Time: Enter the Lease time in minutes. D-Link DIR-130 User Manual 25
  • D-Link DIR-130 | Product Manual - Page 31
    or device. Copy Your PC's If you want to assign an IP address to the MAC Address: computer you are currently on, click this button to populate the fields. Save: Click Save to save your entry. You must click Save Settings at the top to activate your reservations. D-Link DIR-130 User Manual 26
  • D-Link DIR-130 | Product Manual - Page 32
    Section 3 - Configuration VPN Settings The DIR-130 supports IPSec, PPTP, and L2TP VPN as the Server Endpoint. Add VPN Profile: Select IPSec or PPTP/L2TP from the drop-down menu and then click Add. D-Link DIR-130 User Manual 27
  • D-Link DIR-130 | Product Manual - Page 33
    One of these two authentication methods must be selected. • Pre-shared Key - Manually enter ASCII passphrase in box. • X.509 Certificate - For certificate authentication, certificates must be manually uploaded to the router. See the "Certificates" section for details. D-Link DIR-130 User Manual 28
  • D-Link DIR-130 | Product Manual - Page 34
    box to enable NAT Traversal. Enabling this option will allow IPSec traffic from this endpoint to traverse through the translation process during NAT. The remote VPN endpoint must also support this feature and it must be enabled to function properly over the VPN. D-Link DIR-130 User Manual 29
  • D-Link DIR-130 | Product Manual - Page 35
    idle periods of inactivity. • DPD - Select this option to delete the VPN tunnel if there is no traffic detected. The VPN will re-establish once traffic is again sent through the tunnel. DH security association (SA) with the remote endpoint. The default value is 3600. D-Link DIR-130 User Manual 30
  • D-Link DIR-130 | Product Manual - Page 36
    authentication protocol (PAP/CHAP/MS-CHAP v2). Protocol: MPPE Encryption Select the level of encryption (None/40-bit/128-bit). Mode: Authentication Select a user group from the drop-down menu. You can create user groups in the Advanced > User Group section. Database: D-Link DIR-130 User Manual 31
  • D-Link DIR-130 | Product Manual - Page 37
    . Schedule: The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Maintenance > Schedules section. D-Link DIR-130 User Manual 32
  • D-Link DIR-130 | Product Manual - Page 38
    port (TCP, UDP, or Any). Schedule: The schedule of time when the Application Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Maintenance > Schedules section. D-Link DIR-130 User Manual
  • D-Link DIR-130 | Product Manual - Page 39
    to filter. To find the MAC address on a computer, please refer to the Networking Basics section in this manual. DHCP Client: Select a DHCP client from the drop-down menu and click
  • D-Link DIR-130 | Product Manual - Page 40
    may be set to Always, which will allow the filter to always be enabled. You can create your own times in the Maintenance > Schedules section. D-Link DIR-130 User Manual 35
  • D-Link DIR-130 | Product Manual - Page 41
    that the IP address of the DMZ machine does not change. Schedule: The schedule of time when the DMZ will be enabled. The schedule may be set to Always, which will allow the DMZ to always be enabled. You can create your own times in the Maintenance > Schedules section. D-Link DIR-130 User Manual 36
  • D-Link DIR-130 | Product Manual - Page 42
    a protocol from the drop-down menu. The protocol that is selected will be either allowed or denied, depending on the selected action. Port Range: Enter a Port Range. The Port Range that is entered will be either allowed, or denied, depending on the selected action. D-Link DIR-130 User Manual 37
  • D-Link DIR-130 | Product Manual - Page 43
    some extra security from hackers. Check the box to allow the Internet port to be "pinged". WAN Port Speed: You may set the port speed of the Internet port to 10Mbps, 100Mbps, or Auto. Some older cable or DSL modems may require you to set the port speed to 10Mbps. D-Link DIR-130 User Manual 38
  • D-Link DIR-130 | Product Manual - Page 44
    Russian PPTP. Destination Enter the destination address for the static routing Address: rule. Subnet Mask: Enter the subnet mask for the static routing rule. Gateway: Enter the gateway for the static routing rule. Metric: Enter the metric for the static routing rule. D-Link DIR-130 User Manual 39
  • D-Link DIR-130 | Product Manual - Page 45
    is used to configure Certificates that are used with an IPSec based VPN.You can configure local certificates and the certificates of remote peers. be used with your router. Enter a name for the CA file. Click the browse button to look for the CA file on your computer. D-Link DIR-130 User Manual 40
  • D-Link DIR-130 | Product Manual - Page 46
    click the Database: EDIT button to configure that group. Group Name: Enter a name for the user group. Click the Clear the list below button to erase all of the user names and passwords for the user group. User Name: Enter the User Name. Password: Enter the Password. D-Link DIR-130 User Manual 41
  • D-Link DIR-130 | Product Manual - Page 47
    x.x.x.x is the Internet IP address of the DIR-130 and 8080 is the port used for the Web Management interface. The schedule may be set to Always, which will allow the filter to always be enabled.You can create your own times in the Maintenance > Schedules section. D-Link DIR-130 User Manual 42
  • D-Link DIR-130 | Product Manual - Page 48
    to a server on the Internet, not a local server. NTP Server Used: Select an NTP server from the drop-down menu. Manual: To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Save Settings. D-Link DIR-130 User Manual 43
  • D-Link DIR-130 | Product Manual - Page 49
    from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save Configuration button above. Reboot the Click to reboot the router. DIR-130: D-Link DIR-130 User Manual 44
  • D-Link DIR-130 | Product Manual - Page 50
    http://support.dlink.com. You can download firmware upgrades to your hard drive from the D-Link support site. Browse: After you have downloaded the new firmware, click Browse to locate the firmware update on your hard drive. Click Apply to complete the firmware upgrade. D-Link DIR-130 User Manual
  • D-Link DIR-130 | Product Manual - Page 51
    . Password or Key: Enter the Password or Key for your DDNS account. Verify Password or Reenter the password or key for your DDNS Key: account. Timeout: The default value is 240 (hours). Do not change this value unless otherwise specified by you DDNS service provider. D-Link DIR-130 User Manual 46
  • D-Link DIR-130 | Product Manual - Page 52
    Check The router System Check uses a ping test to send ping packets to test if a computer in on the Internet. Ping Test: Enter the IP address that you wish to ping and click the Ping button. Ping Results: The results of your ping attempts will be displayed here. D-Link DIR-130 User Manual 47
  • D-Link DIR-130 | Product Manual - Page 53
    Section 3 - Configuration Schedules This section is used to manage schedule rules for port forwarding, firewall rules, web filtering, and remote Name: Enter a name for your new schedule. Days: Select a to make changes or click the Delete icon to remove the schedule. D-Link DIR-130 User Manual 48
  • D-Link DIR-130 | Product Manual - Page 54
    Section 3 - Configuration Log Settings SMTP Server/IP The address of the SMTP server that will be Address: used to send the logs. Email Address: The email address to the log to your hard drive. Local Hard Drive: Log Type: Select the type of log you would like to view. D-Link DIR-130 User Manual 49
  • D-Link DIR-130 | Product Manual - Page 55
    DIR-130. It will display the LAN, WAN (Internet), and the firmware version of the router. If your Internet connection is set up for a Dynamic IP the private (local) IP settings for the router. WAN: Displays the MAC address and the public IP settings for the router. D-Link DIR-130 User Manual 50
  • D-Link DIR-130 | Product Manual - Page 56
    Section 3 - Configuration Log This page displays the log events of the router. Here you can view the logs of the router. First Page: This button will direct you to the current first page of the to view the next page of the log. Clear: Clears all current log content. D-Link DIR-130 User Manual 51
  • D-Link DIR-130 | Product Manual - Page 57
    . Reset: This button will reset the statistics packet count to zero for all interfaces listed. WAN: Displays the amount of packets transmitted and received on the WAN interface. LAN: Displays the amount of packets transmitted and received on the LAN interface. D-Link DIR-130 User Manual 52
  • D-Link DIR-130 | Product Manual - Page 58
    Status menu shows the active sessions currently running on your router. The list will display the protocol, the source IP address and the destination IP address for each active session. First Page: This button will direct you to the next page of the active sessions. D-Link DIR-130 User Manual 53
  • D-Link DIR-130 | Product Manual - Page 59
    connected wired clients. This table also displays the connection time and MAC address of the connected wired clients. Routing This page displays a list of the default and static routes used by the router. D-Link DIR-130 User Manual 54
  • D-Link DIR-130 | Product Manual - Page 60
    Section 3 - Configuration VPN The VPN table displays a list of current PPTP, L2TP, L2TP over IPSec, and IPSec VPN sessions. Help The support menu provides additional information regarding features included in the DIR-130 Web Management Interface. D-Link DIR-130 User Manual 55
  • D-Link DIR-130 | Product Manual - Page 61
    . Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows® firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DIR-130 User Manual 56
  • D-Link DIR-130 | Product Manual - Page 62
    and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the password box empty. A list of the default settings can be found on page 64. D-Link DIR-130 User Manual 57
  • D-Link DIR-130 | Product Manual - Page 63
    Enter. • Windows® 95, 98, and Me users click on Start, click Run, and then type command. Click OK or press Enter. • Once the window opens, you'll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-130 User Manual 58
  • D-Link DIR-130 | Product Manual - Page 64
    IP address of your router (192.168.0.1) and click OK. • Enter your username (admin) and password (blank by default). Click OK to enter the web configuration page for the device. • Click on Setup and then click Manual Configuration > Time and Date for more information. D-Link DIR-130 User Manual 59
  • D-Link DIR-130 | Product Manual - Page 65
    the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-130 User Manual 60
  • D-Link DIR-130 | Product Manual - Page 66
    Default Gateway the same as the LAN IP address of your router (192.168.0.1). • Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). • The Secondary DNS is optional (you may enter a DNS server from your ISP). • Click OK to save your settings. D-Link DIR-130 User Manual 61
  • D-Link DIR-130 | Product Manual - Page 67
    Default Gateway the same as the LAN IP address of your router (192.168.0.1). • Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). • The Secondary DNS is optional (you may enter a DNS server from your ISP). • Click OK to save your settings. D-Link DIR-130 User Manual 62
  • D-Link DIR-130 | Product Manual - Page 68
    • WAN • LAN (1-8) Operating Temperature • 32°F to 104°F ( 0°C to 40°C) Humidity • 95% maximum (non-condensing) Safety & Emissions • FCC • CE • IC Dimensions • L = 7.6 inches • W = 4.6 inches • H = 1.2inches Warranty • 1 Year D-Link DIR-130 User Manual 63
  • D-Link DIR-130 | Product Manual - Page 69
    unit), the router will reset with the following settings: Setting Username Password LAN IP Address DHCP Server DHCP IP Range Filtering / Virtual Server / DMZ / Applications Default Value admin (leave blank) 192.168.0.1 Enabled 192.168.0.100 - 192.168.0.150 Disabled D-Link DIR-130 User Manual 64
  • D-Link DIR-130 | Product Manual - Page 70
    asked questions and answers to technical issues. For customers within the United States: Phone Support: (877) 354-6555 Internet Support: http://support.dlink.com For customers within Canada: Phone Support: (877) 354-6560 Internet Support: http://support.dlink.com D-Link DIR-130 User Manual 65
  • D-Link DIR-130 | Product Manual - Page 71
    for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DIR-130 User Manual 66
  • D-Link DIR-130 | Product Manual - Page 72
    if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid . • The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to assist the dlink.com/. D-Link DIR-130 User Manual 67
  • D-Link DIR-130 | Product Manual - Page 73
    include any manuals or accessories in the shipping package. DLink will only firmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link Link DIR-130 User Manual 68
  • D-Link DIR-130 | Product Manual - Page 74
    from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright © 2007 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link DIR-130 User Manual 69
  • D-Link DIR-130 | Product Manual - Page 75
    radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference érique de la classe B est conforme à la norme NMB-003 du Canada. D-Link DIR-130 User Manual 70
  • D-Link DIR-130 | Product Manual - Page 76
    copyright and its own applicable license conditions. The Open Source Software licenses can be found in the gpl.pdf file, other materials accompanying the software package, the documentation or corresponding source files available from http://support.dlink.com/GPL.asp. D-Link DIR-130 User Manual 71
  • D-Link DIR-130 | Product Manual - Page 77
    software, we are referring to freedom, not price. Our General Public Licenses are designed to make of free software (and charge for this service if you wish), that you receive source problems introduced by others will not reflect on the original authors' reputations. D-Link DIR-130 User Manual 72
  • D-Link DIR-130 | Product Manual - Page 78
    of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. D-Link DIR-130 User Manual 73
  • D-Link DIR-130 | Product Manual - Page 79
    no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the form with such an offer, in accord with Subsection b above.) D-Link DIR-130 User Manual 74
  • D-Link DIR-130 | Product Manual - Page 80
    under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. D-Link DIR-130 User Manual 75
  • D-Link DIR-130 | Product Manual - Page 81
    present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. make exceptions for this. Our decision will be guided by the two goals of preserving the free status SERVICING, REPAIR OR CORRECTION. D-Link DIR-130 User Manual 76
  • D-Link DIR-130 | Product Manual - Page 82
    WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS D-Link DIR-130 User Manual 77
  • D-Link DIR-130 | Product Manual - Page 83
    Appendix F - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.1 September 5, 2007 D-Link DIR-130 User Manual 78
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83