D-Link DIR-836L Manual

D-Link DIR-836L Manual

Get D-Link DIR-836L PDF manuals and user guides View all D-Link DIR-836L manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DIR-836L manual content summary:

  • D-Link DIR-836L | Manual - Page 1
  • D-Link DIR-836L | Manual - Page 2
    are trademarks or registered trademarks of their respective companies. Copyright © 2012 by D-Link Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc. D-Link DIR-836L User Manual i
  • D-Link DIR-836L | Manual - Page 3
    WPA/WPA2-Enterprise (RADIUS)..........46 Network Settings 48 Router Settings 48 DHCP Server Settings 49 DHCP Reservation 51 Storage 52 Setup Wizard 53 Manual Setup 55 Access Files from the Internet 56 IPv6 57 IPv6 Internet Connection Setup Wizard 58 D-Link DIR-836L User Manual ii
  • D-Link DIR-836L | Manual - Page 4
    110 Connect a Wireless Client to your Router 111 WPS Button 111 Windows® 7 112 WPA/WPA2 112 WPS 115 Windows Vista 119 WPA/WPA2 120 WPS/WCN 2.0 122 Windows® XP 123 WPA/WPA2 124 Troubleshooting 126 Wireless Basics 130 What is Wireless 131 Tips 133 Wireless Modes 134 D-Link DIR-836L
  • D-Link DIR-836L | Manual - Page 5
    Table of Contents Networking Basics 135 Check your IP address 135 Statically Assign an IP address 136 Technical Specifications 137 Contacting Technical Support 138 GPL Code Statement 139 Warranty 151 Registration 158 D-Link DIR-836L User Manual iv
  • D-Link DIR-836L | Manual - Page 6
    Overview PProacdkuacgteOCvoentrevnietsw DIR-836L Wireless N750 Dual Band Gigabit Router Ethernet Cable Power Adapter If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-836L will cause
  • D-Link DIR-836L | Manual - Page 7
    : • Internet Explorer 7 or higher • Firefox • Chrome • Safari 5 or higher • iPhone/iPad/iPod Touch (iOS 4.3 or higher) • Android device (2.0 or higher) iPhone, iPad, and iPod touch are registered trademarks of Apple Inc. Android is a trademark of Google, Inc. D-Link DIR-836L User Manual 2
  • D-Link DIR-836L | Manual - Page 8
    Section 1 - Product Overview Introduction The D-Link Wireless N750 Dual Band Gigabit Router (DIR-836L) comes equipped with 4 Gigabit ports to provide speeds up to 10x faster than standard 10/100 ports. It also uses 802.11n technology with multiple intelligent antennas to maximize the speed and range
  • D-Link DIR-836L | Manual - Page 9
    Setup Wizard - Through its easy-to-use Web-based user interface, the DIR-836L lets you control what information is accessible to those on the wireless network, whether from the Internet or from your company's server. Configure your router to your specific settings within minutes. * Maximum wireless
  • D-Link DIR-836L | Manual - Page 10
    as computers, switches, storage (NAS) devices and game consoles. 4 Internet Port Using an Ethernet cable, connect your broadband modem to this port. 5 Power Button Press the power button to power on and off. 6 Power Receptor Receptor for the supplied power adapter. D-Link DIR-836L User Manual 5
  • D-Link DIR-836L | Manual - Page 11
    connection on the Internet port. If the LED is orange, the connection is good 2 Internet LED but the router cannot connect to the Internet. If this LED is blinking orange, this indicates that the "on demand" connection type is set and the Internet connection is idle. D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 12
    installing. Connecting 2 routers together may not work correctly. If you do have a modem/router combo, you must put your modem/router in Bridge mode to bypass the router functions which will allow your DIR-836L router to work properly. Please contact your ISP or refer to your modem's user guide
  • D-Link DIR-836L | Manual - Page 13
    Section 2 - Installation Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls,
  • D-Link DIR-836L | Manual - Page 14
    the Ethernet cable from your modem (or existing router if upgrading) that is connected to your computer. Plug it into the LAN port labeled 1 on the back of your router. The router is now connected to your computer. Computer USB WPS 1 2 3 4 INTERNET POWER DIR-836L D-Link DIR-836L User Manual 9
  • D-Link DIR-836L | Manual - Page 15
    DIR-836L USB WPS 1 2 3 4 INTERNET POWER 7. Open a web browser. For first time setup, you will automatically be directed to the D-Link Setup Wizard. Skip to page 14. If the wizard does not appear, you can manually log in and configure your router. Refer to page 26. D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 16
    are connecting the DIR-836L to an existing router to use as a wireless access point and/or switch, you will have to do the following to the DIR-836L before connecting it to your network: • Disable UPnP™ • Disable DHCP • Change the LAN IP address to an available address on your network. The LAN ports
  • D-Link DIR-836L | Manual - Page 17
    other 3 LAN ports to connect other Ethernet devices and computers. To configure your wireless network, open a web browser and enter the IP address you assigned to the router. Refer to the Configuration section for more information on setting up your wireless network. D-Link DIR-836L User Manual 12
  • D-Link DIR-836L | Manual - Page 18
    into the router for the first time. Refer to page 14. • QRS Mobile App - Use your iPhone, iPad, or iPod Touch to configure your router. Refer to page 21. • Manual Setup - Log into the router and manually configure your router (advanced users only). Refer to page 26. D-Link DIR-836L User Manual 13
  • D-Link DIR-836L | Manual - Page 19
    your new D-Link router and connect to the Internet. Click Next to continue. Please wait while your router detects your internet connection type. If the router detects your Internet connection, you may need to enter your ISP information such as username and password. D-Link DIR-836L User Manual 14
  • D-Link DIR-836L | Manual - Page 20
    but does not detect the type of Internet connection you have, this screen will appear. Click Guide me through the Internet Connection Settings to display a list of connection types to choose from. Select your Internet connection type and click Next to continue. D-Link DIR-836L User Manual 15
  • D-Link DIR-836L | Manual - Page 21
    PPTP, enter your PPTP username, password, and other information supplied by your ISP. Click Next to continue. If the router detected or you selected L2TP, enter your L2TP username, password, and other information supplied by your ISP. Click Next to continue. D-Link DIR-836L User Manual 16
  • D-Link DIR-836L | Manual - Page 22
    entered to be able to connect to your wireless network. Click Next to continue. In order to secure your router, please enter a new password. Check the Enable Graphical Authentication box to enable CAPTCHA authentication for added security. Click Next to continue. D-Link DIR-836L User Manual 17
  • D-Link DIR-836L | Manual - Page 23
    your wireless settings. Click Save and Connect to continue. If you want to create a bookmark to the router, click OK. Click Cancel if you do not want to create a bookmark. If you clicked Yes, a window may appear (depending on what web browser you are using) to create a bookmark. D-Link DIR-836L
  • D-Link DIR-836L | Manual - Page 24
    3 - Configuration To use the mydlink service (mydlink.com or the mydlink Lite address) and password. Click Login to register your router. If you clicked No, fill out the requested information and click Next to create your mydlink account. Your router setup is complete. D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 25
    your router from an iPhone/iPad/iPod Touch (iOS 3.0 or higher), Android device (1.6 or higher). To download the "mydlink lite" app, visit the Apple Store, Android Market or http://mydlink.com/Lite. PC and Mac users can use the mydlink portal at http://mydlink.com. D-Link DIR-836L User Manual 20
  • D-Link DIR-836L | Manual - Page 26
    for the wireless network name (SSID) as listed on the supplied info card. Select and then enter your security password (Wi-Fi Password). Step 3 Once you connect to the router, launch the QRS mobile app and it will guide you through the installation of your router. D-Link DIR-836L User Manual 21
  • D-Link DIR-836L | Manual - Page 27
    you do not have the App, search for D-link SharePort Mobile from the App Store or Google play. You will be directed to the App Store or the Google play store to begin the Installation process. Please make sure you have Internet connection before downloading the app. D-Link DIR-836L User Manual 22
  • D-Link DIR-836L | Manual - Page 28
    in the setup and then enter your Wi-Fi password. Android - Press Wireless & Networks > Wi-Fi Settings and then select the wireless network (SSID) that you created in the setup. Enter your Wi-Fi password. 5. Once connected, click on the SharePort Mobile icon. D-Link DIR-836L User Manual Settings 23
  • D-Link DIR-836L | Manual - Page 29
    to enter your User Name and Password. Once you finish, click Done to continue. 8. For the Movie section, click the movie icon to play your movie from your USB flash drive. 9. For the Music section, click the music icon to play your music from your USB flash drive. D-Link DIR-836L User Manual 24
  • D-Link DIR-836L | Manual - Page 30
    , click the Photo icon to view your photos from your USB flash drive. 11. For the Files section, click on the Files icon to view your files from your USB flash drive. 12. For the Folder section, click the folder icon to view your folders from your USB flash drive. D-Link DIR-836L User Manual 25
  • D-Link DIR-836L | Manual - Page 31
    utility, open a web-browser such as Internet Explorer and enter http://dlinkrouter.local. You may also connect by typing the router's LAN IP address (http://192.168.0.1) in the address bar. Enter your password and click Log In. Leave the password blank by default. D-Link DIR-836L User Manual 26
  • D-Link DIR-836L | Manual - Page 32
    Setup to configure your connection manually and continue to the next page. If you want to configure your router to connect to the Internet using the wizard, click Internet Connection Setup Wizard. You will be directed to the Quick Setup Wizard. Please refer to page 14. D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 33
    in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format. My Internet Connection: Select Static IP to manually enter the IP settings supplied by your ISP. Enable Advanced DNS Advanced
  • D-Link DIR-836L | Manual - Page 34
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-836L User Manual 29
  • D-Link DIR-836L | Manual - Page 35
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-836L User Manual 30
  • D-Link DIR-836L | Manual - Page 36
    IP address (Static PPPoE only). User Name: Enter your PPPoE user name. Password: Enter your PPPoE password and then retype the password in the next box. Service Name: Enter the ISP Service Name (optional). Reconnect Select either Always-on, On-Demand, or Manual. Mode: D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 37
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-836L User Manual 32
  • D-Link DIR-836L | Manual - Page 38
    : Enter the IP address (Static PPTP only). PPTP Subnet Enter the Primary and Secondary DNS Server Addresses (Static PPTP Mask: only). PPTP Gateway: Enter the Gateway IP Address provided by your ISP. PPTP Server IP: Enter the Server IP provided by your ISP (optional). D-Link DIR-836L User Manual 33
  • D-Link DIR-836L | Manual - Page 39
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-836L User Manual 34
  • D-Link DIR-836L | Manual - Page 40
    L2TP IP address supplied by your ISP (Static only). L2TP Subnet Enter the Subnet Mask supplied by your ISP (Static only). Mask: L2TP Gateway: Enter the Gateway IP Address provided by your ISP. L2TP Server IP: Enter the Server IP provided by your ISP (optional). D-Link DIR-836L User Manual 35
  • D-Link DIR-836L | Manual - Page 41
    address on the Broadband Router. It is not recommended Address: that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 42
    41. Click Add Wireless Device with WPS if you want to add a wireless device using Wi-Fi Protected Setup (WPS) and refer to page 43. If you want to manually configure the wireless settings on your router click Manual Wireless Network Setup and refer to the next page. D-Link DIR-836L User Manual 37
  • D-Link DIR-836L | Manual - Page 43
    is selected, the SSID of the DIR-836L will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-836L in order to connect to it. Wireless Security: Refer to page 40 for more information regarding wireless security. D-Link DIR-836L User Manual 38
  • D-Link DIR-836L | Manual - Page 44
    is selected, the SSID of the DIR-836L will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-836L in order to connect to it. Wireless Security: Refer to the next page for more information regarding wireless security. D-Link DIR-836L User Manual 39
  • D-Link DIR-836L | Manual - Page 45
    on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-836L User Manual 40
  • D-Link DIR-836L | Manual - Page 46
    click Wireless Network Setup Wizard. Type your desired wireless network name (SSID). Automatically: Select this option to automatically generate the router's network key and click Next. Manually: Select this option to manually enter your network key and click Next. D-Link DIR-836L User Manual 41
  • D-Link DIR-836L | Manual - Page 47
    will display your settings. Write down the security key and enter this on your wireless clients. Click Save to save your settings. If you selected Manually, the following screen will appear. Create a passphrase for your security password. Click Next to continue. D-Link DIR-836L User Manual 42
  • D-Link DIR-836L | Manual - Page 48
    Select Auto to add a wireless client using WPS (Wi-Fi Protected Setup) and then click Next. Skip to the next page. If you select Manual, a settings summary screen will appear. Write down the security key and enter this on your wireless clients. Click OK to finish. D-Link DIR-836L User Manual 43
  • D-Link DIR-836L | Manual - Page 49
    and click Connect. PBC: Select this option to use PBC (Push Button) method to add a wireless client. Click Connect. Once you click Connect, you will have a 120 second time limit to apply the settings to your wireless client(s) and successfully establish a connection. D-Link DIR-836L User Manual 44
  • D-Link DIR-836L | Manual - Page 50
    must be between 8-63 characters. 7. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the router. D-Link DIR-836L User Manual 45
  • D-Link DIR-836L | Manual - Page 51
    connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. 1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on Setup and then click Wireless Settings
  • D-Link DIR-836L | Manual - Page 52
    If the MAC Address Authentication box is selected then the user will need to connect from the same computer whenever logging into the wireless network. 11. Click Advanced to enter settings for a secondary RADIUS Server. 12. Click Apply Settings to save your settings. D-Link DIR-836L User Manual 47
  • D-Link DIR-836L | Manual - Page 53
    allow you to change the local network settings of the router and to configure the DHCP settings. Router Settings Router IP Enter the IP address of the router. The default IP address Address: is 192.168.0.1. If you change the IP address, once you click Save Settings, you will need to enter the new
  • D-Link DIR-836L | Manual - Page 54
    TCP/IP settings provided by the DIR-836L. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool. Enable DHCP Check this box to enable the DHCP server on your router
  • D-Link DIR-836L | Manual - Page 55
    Section 3 - Configuration NetBIOS Node: Select the different type of NetBIOS node; Broadcast only, Point-to-Point, Mixed-mode, and Hybrid. WINS IP Enter your WINS Server IP address(es). Address: D-Link DIR-836L User Manual 50
  • D-Link DIR-836L | Manual - Page 56
    the host name Reservations List: (name of your computer or device), MAC Address, and IP address. Enable: Check to enable the reservation. Edit: Click the edit icon to make changes to the reservation entry. Delete: Click to remove the reservation from the list. D-Link DIR-836L User Manual 51
  • D-Link DIR-836L | Manual - Page 57
    Dynamic DNS (DDNS) account. Refer to the next page. SharePort Mobile/Web Access Manual Setup Click this button to manually configure your SharePort Mobile settings. You can create multiple user accounts as well as configure more advanced settings. Skip to page 55. D-Link DIR-836L User Manual 52
  • D-Link DIR-836L | Manual - Page 58
    Setup Wizard Step 1 - Make sure you have plugged in a USB thumb drive or external hard drive into the USB port on the router. Click Next to continue. Step 2 - Create a user account and a password. This is only to access the shared files on your USB and then click OK. D-Link DIR-836L User Manual 53
  • D-Link DIR-836L | Manual - Page 59
    of an IP address to access your shared files from the Internet. Click Next to continue. If you do not have or want an account, leave the boxes empty and click Next. If you would like a DDNS account through D-Link, click the www. dlinkddns.com link to create a new account. Step 6 - Setup is complete
  • D-Link DIR-836L | Manual - Page 60
    built-in to the router. Number of Displays the USB device plugged into the router. Devices: SharePort Web Displays the URL(s) to enter in your web browser to access Access Link: your shared files on a USB thumb drive or external hard drive connected to your router. D-Link DIR-836L User Manual 55
  • D-Link DIR-836L | Manual - Page 61
    if you selected HTTPS, you must type in HTTPS:// instead of HTTP:// to get a secure connection. For example, if you selected HTTPS and changed the port to 3200, and your WAN IP address of the router is 1.2.3.4, then you would enter HTTPS://1.2.3.4:3200 to connect. D-Link DIR-836L User Manual 56
  • D-Link DIR-836L | Manual - Page 62
    network up and running. For the advanced user that has configured a router before, click on the Manual IPv6 Internet Connection Setup button to input all the settings manually. To configure the IPv6 local settings, click on the IPv6 Local Connectivity Setup button. D-Link DIR-836L User Manual 57
  • D-Link DIR-836L | Manual - Page 63
    and return to the main page. The router will try to detect whether its possible to obtain the IPv6 Internet connection type automatically. If this succeeds then the user will be guided through the input of the appropriate parameters for the connection type found. D-Link DIR-836L User Manual 58
  • D-Link DIR-836L | Manual - Page 64
    Guide me through the IPv6 settings button to initiate the manual continual of the wizard. There are several connection types to choose from. If you are unsure of your connection method, please contact your IPv6 Internet Service made and return to the main page. D-Link DIR-836L User Manual 59
  • D-Link DIR-836L | Manual - Page 65
    contact your ISP. Password: Enter the PPPoE password used here. If you do not know your password, please contact your ISP. Verify Password: Re-enter the PPPoE password used here. Service Name: Enter the service name for this connection here. This option is optional. D-Link DIR-836L User Manual 60
  • D-Link DIR-836L | Manual - Page 66
    DNS Address: LAN IPv6 Address: These are the settings of the LAN (Local Area Network) IPv6 interface for the router. The router's LAN IPv6 Address configuration is based on the IPv6 Address and Subnet assigned by your ISP. (A subnet with prefix /64 is supported in LAN.) D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 67
    Server address used here. The IPv6 Internet Connection Setup Wizard is complete. Click on the Connect button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. D-Link DIR-836L User Manual 62
  • D-Link DIR-836L | Manual - Page 68
    Service Provider. Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled. Auto Detection Select Auto Detection to have the router detect and automatically configure your IPv6 setting from your ISP. D-Link DIR-836L
  • D-Link DIR-836L | Manual - Page 69
    Connection: Select Static IPv6 from the drop-down menu. WAN IPv6 Address Enter the address settings supplied by your Internet provider Settings: (ISP). LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address: Displays the Router's LAN Link-Local Address. Enable
  • D-Link DIR-836L | Manual - Page 70
    Address Range Enter the start IPv6 Address for the DHCPv6 range for your Start: local computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your End: local computers. IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-836L User Manual 65
  • D-Link DIR-836L | Manual - Page 71
    primary and secondary DNS server addresses. Address: LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address: Displays the Router's LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. D-Link DIR-836L User Manual 66
  • D-Link DIR-836L | Manual - Page 72
    Address Range Start: Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End: Enter the end IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-836L User Manual 67
  • D-Link DIR-836L | Manual - Page 73
    Enter the start IPv6 Address for the DHCPv6 range for your local Range Start: computers. IPv6 Address Enter the end IPv6 Address for the DHCPv6 range for your local Range End: computers. Pv6 Address Enter the Router Advertisement Lifetime (in minutes). Lifetime: D-Link DIR-836L User Manual 68
  • D-Link DIR-836L | Manual - Page 74
    Connection: Select 6 to 4 from the drop-down menu. 6 to 4 Settings: Enter the IPv6 settings supplied by your Internet provider (ISP). Primary/Secondary Enter the primary and secondary DNS server addresses. DNS Address: LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN Link
  • D-Link DIR-836L | Manual - Page 75
    Link-Local Address. Enable Check to enable the Autoconfiguration feature. Autoconfiguration: Autoconfiguration Type: Select Stateful (DHCPv6), SLAAC+RDNSS or SLAAC + Stateless DHCPv6. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 76
    Section 3 - Configuration Link-Local Connectivity My IPv6 Connection: Select Link-Local Only from the drop-down menu. LAN IPv6 Address Displays the IPv6 address of the router. Settings: D-Link DIR-836L User Manual 71
  • D-Link DIR-836L | Manual - Page 77
    Section 3 - Configuration mydlink Settings mydlink Service: Displays whether your device is registered with a mydlink account or not. Register mydlink Click to go to the mydlink website to register or edit your Settings: settings. D-Link DIR-836L User Manual 72
  • D-Link DIR-836L | Manual - Page 78
    the particular service to always be enabled. You can create your own times in the Tools > Schedules section. Inbound Filter: Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page. D-Link DIR-836L User Manual 73
  • D-Link DIR-836L | Manual - Page 79
    the particular service to always be enabled. You can create your own times in the Tools > Schedules section. Inbound Filter: Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page. D-Link DIR-836L User Manual 74
  • D-Link DIR-836L | Manual - Page 80
    firewall port (TCP, UDP, or Both). Schedule: The schedule of time when the Application Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 81
    port number is within the range set here. Remote IP Range: The rule applies to a flow of messages whose WAN-side IP address falls within the range set here. Remote Port Range: The rule applies to a flow of messages whose WAN-side port number is within the range set here. D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 82
    address you would like to filter. To find the MAC address on a computer, please refer to the Networking Basics section in this manual. DHCP Client: Select a DHCP client from the drop-down menu and click
  • D-Link DIR-836L | Manual - Page 83
    to approved sites, limit web access based on time or dates, and/or block access from applications like P2P utilities or games. Add Policy: Click the Add Policy button to start the Access Control Wizard. Click Next to continue with the wizard. Access Control Wizard D-Link DIR-836L User Manual 78
  • D-Link DIR-836L | Manual - Page 84
    - Select IP address, MAC address, or Other Machines. • IP Address - Enter the IP address of the computer you want to apply the rule to. • Machine Address - Enter the PC MAC address (i.e. 00:00.00.00.00). Select the filtering method and then click Next to continue. D-Link DIR-836L User Manual 79
  • D-Link DIR-836L | Manual - Page 85
    IP address. Protocol - Select the protocol. Dest Port Start - Enter the starting port number. Dest Port End - Enter the ending port number. To enable web logging, click Enable. Click Save to save the access control rule. Your newly created policy will now show up under Policy Table. D-Link DIR-836L
  • D-Link DIR-836L | Manual - Page 86
    the Access Control section (page 78). Add Website Select either DENY computers access to ONLY Filtering Rule: these sites or ALLOW computers access to ONLY these sites. Website URL/ Enter the keywords or URLs that you want to allow Domain: or block. Click Save Settings. D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 87
    advanced method of controlling data received from the Internet. With this feature you can configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual Server, Port Forwarding, or Remote Administration features. Name: Enter a name for
  • D-Link DIR-836L | Manual - Page 88
    ALG may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network, try turning this ALG off. Please check with the system administrator of your corporate network whether your VPN client supports NAT traversal. D-Link DIR-836L User Manual 83
  • D-Link DIR-836L | Manual - Page 89
    over IP) to communicate across NAT. Some VoIP applications and devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. D-Link DIR-836L User Manual 84
  • D-Link DIR-836L | Manual - Page 90
    advanced method of customizing specific routes of data through your network. Name: Enter a name for your route. Destination IP: Enter the IP address of packets that Select the interface that the IP packet must use to transit out of the router when this route is used. D-Link DIR-836L User Manual 85
  • D-Link DIR-836L | Manual - Page 91
    : Enable this option to reduce interference from other wireless networks in your area. If the channel width is operating at 40MHz and there is another wireless network's channel over-lapping and causing interference, the router will automatically change to 20MHz. D-Link DIR-836L User Manual 86
  • D-Link DIR-836L | Manual - Page 92
    reset the PIN. Current PIN: Shows the current PIN. Reset PIN to Restore the default PIN of the router. Default: Generate New Create a random number that is a valid PIN. This becomes PIN: the router's PIN. You can then copy this PIN to the user interface of the registrar. D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 93
    page 43. Device Wizard: WPS Button You can also simply press the WPS button on the side of the router, and then press the WPS button on your wireless client to automatically connect without logging into the router. Refer to page 111 for more information. WPS Button D-Link DIR-836L User Manual 88
  • D-Link DIR-836L | Manual - Page 94
    for more information. WAN Port Speed: You may set the port speed of the Internet port to 10Mbps, 100Mbps, 1000Mbps router from the Internet (IPv4). Enable IPV6 Check the box to allow multicast traffic to pass through Multicast Streams: the router from the Internet (IPv6). D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 95
    is different Network Name: from your main wireless network. Enable Routing Check to allow network connectivity between the Between Zones: different zones created. Security Mode: Select the type of security or encryption you would like to enable for the guest zone. D-Link DIR-836L User Manual 90
  • D-Link DIR-836L | Manual - Page 96
    IP addresses of the firewall rule. Protocol: Select the protocol of the firewall port (All, TCP, UDP, or ICMP). Port Range: Enter the first port of the range that will be used for the firewall rule in the first box and enter the last port in the field in the second box. D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 97
    this route. Metric: Enter the metric value for this rule here. Interface: Use the drop-down menu to specify if the IP packet must use the WAN or LAN interface to transit out of the Router. Gateway: Enter the next hop that will be taken if this route is used. D-Link DIR-836L User Manual 92
  • D-Link DIR-836L | Manual - Page 98
    web browser. A username/password is still required to access the Web Management interface. Remote Admin Port: The port number used to access the DIR-836L is used in the URL. Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-836L and 8080 is the port used for the Web
  • D-Link DIR-836L | Manual - Page 99
    synch the time and date with your router. This will only connect to a server on the Internet, not a local server. Check the box to enable this feature. NTP Server Used: Enter the IP address of a NTP server or select one from the drop-down menu. Manual: To manually input the time, enter the values in
  • D-Link DIR-836L | Manual - Page 100
    the router logs to a SysLog SysLog Server: Server. SysLog Server IP The address of the SysLog server that will be Address: used to send the logs. You may also select your computer from the drop-down menu (only if receiving an IP address from the router via DHCP). D-Link DIR-836L User Manual 95
  • D-Link DIR-836L | Manual - Page 101
    select which alerts to be sent to your mobile device (for mydlink Lite app). Event Trigger: Check to enable event triggering (for mydlink Lite app). D-Link DIR-836L User Manual 96
  • D-Link DIR-836L | Manual - Page 102
    the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save button above. Reboot Device: Click to reboot the router. D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 103
    can upgrade the firmware of the access point here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support website for firmware updates at http://support.dlink.com. You
  • D-Link DIR-836L | Manual - Page 104
    registered with your DDNS service provider. Username or Enter the Username or key for your DDNS Key: account. Password or Enter the Password or key for your DDNS account. Key: Timeout: Enter a timeout time (in hours). Status: Displays the current connection status. D-Link DIR-836L User Manual 99
  • D-Link DIR-836L | Manual - Page 105
    Ping packets to test if a computer is on the Internet. Enter the IP address that you wish to Ping and click Ping. IPv6 Ping Test: Enter the IPv6 address that you wish to Ping and click Ping. Ping Results: The results of your ping attempts will be displayed here. D-Link DIR-836L User Manual 100
  • D-Link DIR-836L | Manual - Page 106
    , if you want to restrict web access to Mon-Fri from 3pm to 8pm Settings at the top for your schedules to go into effect. Schedule Rules The list of schedules will be listed here. Click the List: Edit icon to make changes or click the Delete icon to remove the schedule. D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 107
    . Wireless LAN2: Displays the 5GHz wireless MAC address and your wireless settings such as SSID and Channel. LAN Computers: Displays computers and devices that are connected to the router via Ethernet and that are receiving an IP address assigned by the router (DHCP). D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 108
    to go to the next page. Clear: Clears all of the log contents. Email Now: This option will send a copy of the router log to your email address configured in the Tools > Email Settings screen. Save Log: This option will save the router log to a file on your computer. D-Link DIR-836L User Manual 103
  • D-Link DIR-836L | Manual - Page 109
    3 - Configuration Statistics The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-836L on both the WAN, LAN ports and the wireless segments. The traffic counter will reset if the device is rebooted. D-Link DIR-836L User Manual 104
  • D-Link DIR-836L | Manual - Page 110
    Internet Sessions The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 111
    Section 3 - Configuration This page will display your current routing table. Routing D-Link DIR-836L User Manual 106
  • D-Link DIR-836L | Manual - Page 112
    Section 3 - Configuration Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless clients. D-Link DIR-836L User Manual 107
  • D-Link DIR-836L | Manual - Page 113
    Section 3 - Configuration IPv6 The IPv6 page displays a summary of the Router's IPv6 settings and lists the IPv6 address and host name of any IPv6 clients. D-Link DIR-836L User Manual 108
  • D-Link DIR-836L | Manual - Page 114
    Section 3 - Configuration IPV6 Routing This page displays the IPV6 routing details configured for your router. D-Link DIR-836L User Manual 109
  • D-Link DIR-836L | Manual - Page 115
    Section 3 - Configuration Support D-Link DIR-836L User Manual 110
  • D-Link DIR-836L | Manual - Page 116
    can press to connect to the DIR-836L router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below: Step 1 - Press the WPS button on the DIR-836L for about 1 second. The Internet LED on the
  • D-Link DIR-836L | Manual - Page 117
    to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless Icon D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 118
    get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-836L User Manual 113
  • D-Link DIR-836L | Manual - Page 119
    also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 120
    4 - Security WPS The WPS feature of the DIR-836L can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. D-Link DIR-836L User Manual 115
  • D-Link DIR-836L | Manual - Page 121
    Section 4 - Security 3. Double-click the DIR-836L. 4. Input the WPS PIN number (displayed in the WPS window on the Router's LCD screen or in the Setup > Wireless Setup menu in the Router's Web UI) and click Next. D-Link DIR-836L User Manual 116
  • D-Link DIR-836L | Manual - Page 122
    Section 4 - Security 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-836L User Manual 117
  • D-Link DIR-836L | Manual - Page 123
    The following window informs you that WPS on the router has been setup successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DIR-836L User Manual 118
  • D-Link DIR-836L | Manual - Page 124
    . Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/ IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-836L User Manual 119
  • D-Link DIR-836L | Manual - Page 125
    . 1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-836L User Manual 120
  • D-Link DIR-836L | Manual - Page 126
    that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-836L User Manual 121
  • D-Link DIR-836L | Manual - Page 127
    choose to click the Generate New PIN button or Reset PIN to Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. D-Link DIR-836L User Manual 122
  • D-Link DIR-836L | Manual - Page 128
    . Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-836L User Manual 123
  • D-Link DIR-836L | Manual - Page 129
    the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-836L User Manual 124
  • D-Link DIR-836L | Manual - Page 130
    . Enter the WPA-PSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DIR-836L User Manual 125
  • D-Link DIR-836L | Manual - Page 131
    look similar to the following examples. 1. Why can't I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website nor do you have to be connected to the Internet. The device has the utility built-in to
  • D-Link DIR-836L | Manual - Page 132
    to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the password box empty. D-Link DIR-836L User Manual 127
  • D-Link DIR-836L | Manual - Page 133
    - Troubleshooting 3. Why can't I connect to certain sites or send and receive emails when connecting through my router? If you are having a problem sending or receiving email, or connecting to : ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-836L User Manual 128
  • D-Link DIR-836L | Manual - Page 134
    below: • Open your browser, enter the IP address of your router (192.168.0.1) and click OK. • Enter your username (admin) and password (blank by default). Click OK to enter the web configuration page for the device. • Click on Setup and then click Manual Configure. • To change the MTU enter the
  • D-Link DIR-836L | Manual - Page 135
    . Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. D-Link DIR-836L User Manual 130
  • D-Link DIR-836L | Manual - Page 136
    , the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues. D-Link DIR-836L User Manual 131
  • D-Link DIR-836L | Manual - Page 137
    the speed and wireless operation range are both less than WLAN, but in return it doesn't use nearly as much power which makes it ideal access your office network from home • Share Internet connection and printer with multiple computers • No need to dedicate office space D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 138
    've put together a few setup steps and tips to help you through the process of setting up a wireless network. Tips Here are a few things to keep in mind, when you install a wireless network. Centralize your router or Access Point Make sure you place the router/access point in a centralized location
  • D-Link DIR-836L | Manual - Page 139
    an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 140
    the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 141
    Default Gateway the same as the LAN IP address of your router (I.E. 192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DIR-836L
  • D-Link DIR-836L | Manual - Page 142
    , and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. 2 Frequency Range varies depending on country's regulation 3 The DIR-836L does not include 5.25-5.35GHz & 5.47-5.725GHz in some regions. D-Link DIR-836L User Manual 137
  • D-Link DIR-836L | Manual - Page 143
    asked questions and answers to technical issues. For customers within the United States: Phone Support: (877) 453-5465 Internet Support: http://support.dlink.com For customers within Canada: Phone Support: (800) 361-5265 Internet Support: http://support.dlink.ca D-Link DIR-836L User Manual 138
  • D-Link DIR-836L | Manual - Page 144
    of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at: http://tsd.dlink.com.tw/GPL.asp The GPL code and LGPL code verbatim copies of this license document, but changing it is not allowed. D-Link DIR-836L User Manual 139
  • D-Link DIR-836L | Manual - Page 145
    as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions of the terms and conditions for copying, distribution and modification follow. D-Link DIR-836L User Manual 140
  • D-Link DIR-836L | Manual - Page 146
    masks. "The Program" refers to any copyrightable work licensed under this License. Each licensee is addressed as "you". "Licensees" and "recipients" may be individuals or organizations. To "modify" a is widely used among developers working in that language. D-Link DIR-836L User Manual 141
  • D-Link DIR-836L | Manual - Page 147
    "Corresponding Source" for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to Sublicensing is not allowed; section 10 makes it unnecessary. D-Link DIR-836L User Manual 142
  • D-Link DIR-836L | Manual - Page 148
    you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You may D-Link DIR-836L User Manual 143
  • D-Link DIR-836L | Manual - Page 149
    compilation and its resulting copyright are not used to limit the access or legal rights of the compilation's users beyond what the individual and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the Link DIR-836L User Manual 144
  • D-Link DIR-836L | Manual - Page 150
    to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a governed by this License without regard to the additional permissions. D-Link DIR-836L User Manual 145
  • D-Link DIR-836L | Manual - Page 151
    e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f ) Requiring indemnification of licensors and authors of that material by anyone who or stated as exceptions; the above requirements apply either way. D-Link DIR-836L User Manual 146
  • D-Link DIR-836L | Manual - Page 152
    possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. D-Link DIR-836L User Manual 147
  • D-Link DIR-836L | Manual - Page 153
    License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to believe are valid. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate Link DIR-836L User Manual 148
  • D-Link DIR-836L | Manual - Page 154
    made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version Link DIR-836L User Manual 149
  • D-Link DIR-836L | Manual - Page 155
    NECESSARY SERVICING, REPAIR reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 156
    the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DIR-836L User Manual 151
  • D-Link DIR-836L | Manual - Page 157
    customer in resolving any suspected defects with the product. If the product is considered defective, the customer must obtain a Return Material Authorization ("RMA") number by completing the RMA form and entering the assigned Case ID Number at https:// rma.dlink.com/. D-Link DIR-836L User Manual
  • D-Link DIR-836L | Manual - Page 158
    damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship back any accessories. D-Link DIR-836L User Manual 153
  • D-Link DIR-836L | Manual - Page 159
    BE LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. D-Link DIR-836L User Manual 154
  • D-Link DIR-836L | Manual - Page 160
    . Copyright ©2012 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. D-Link DIR-836L User Manual 155
  • D-Link DIR-836L | Manual - Page 161
    other antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DIR-836L User Manual 156
  • D-Link DIR-836L | Manual - Page 162
    band 5725-5825 MHz) to comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate, as stated in section A9.2(3). In addition, users should also be cautioned to take note that high-power de ce périphérique. D-Link DIR-836L User Manual 157
  • D-Link DIR-836L | Manual - Page 163
    Appendix G - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 August 22, 2012 D-Link DIR-836L User Manual 158
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163