D-Link DP-301P Product Manual - Page 51

Setting up Apple Talk Printing in Mac OS 9 Note: Mac OS printing is supported for PostScript printers only! The AppleTalk network protocol is used with computers using the Macintosh operating system. It can be used for network communications over standard Ethernet or Fast Ethernet using the EtherTalk transport, or over a proprietary LocalTalk transport. Your print server can be used for network printing to PostScript printers. You can print from any Mac OS computer connected to your Ethernet network, either directly using an EtherTalk connection, or indirectly through a LocalTalk-to-EtherTalk router. NOTE: The chooser name of a printer connected to one of the print server's ports is the same as its port name. If you are using AppleTalk printing, you will need to make sure that every port name is unique among all of the network printers in your AppleTalk zone. The port names shown in this manual are examples only. Setting up the print server for AppleTalk Printing To set up your print server so that it can be used for AppleTalk printing: Make sure the AppleTalk protocol is enabled in your Macintosh. Change the IP address on one of the computers on your network to 192.168.0.x, where x is any number between 11-254, excluding 10. Type 192.168.0.10 into the address field of your web browser. 192.168.0.10 is the default IP address of the DP-301P+. Select the Network tab and scroll to the bottom to the AppleTalk protocol section. If your AppleTalk network is divided into AppleTalk zones, you will have to specify which zone the print server should be in. You should locate the print server in the same zone as most of the users who will be using it. If your network is not divided into zones, the AppleTalk Zone field should contain a single asterisk "*". 51