D-Link DP-G321 Product Manual

D-Link DP-G321 - AirPlus G Print Server Manual

Get D-Link DP-G321 - AirPlus G Print Server PDF manuals and user guides View all D-Link DP-G321 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DP-G321 manual content summary:

  • D-Link DP-G321 | Product Manual - Page 1
    D-Link DP-G321 AirPlus G Wireless Print Server Manual Building Networks for People
  • D-Link DP-G321 | Product Manual - Page 2
    Basics 8 Installation Considerations 9 Setting up the DP-G321 10 Power On Self Test 11 Using the Web Configuration 12 TCP/IP Printing for Windows XP 30 TCP/IP Printing for Windows 2000 39 TCP/IP Printing for Windows 98SE/Me 49 Unix/Linux Printing (See PS Admin Manual on CD-ROM 61 Setting up
  • D-Link DP-G321 | Product Manual - Page 3
    „ D-Link DP-G321 Wireless Multi-port Print Server „ Manual and Warranty on CD „ Printed Quick Installation Guide If any of the above items are missing, please contact your reseller. System Requirements: „ A computer with an installed Ethernet adapter for initial configuration purposes only „ Windows
  • D-Link DP-G321 | Product Manual - Page 4
    The D-Link DP-G321 Print Server is an 802.11g wireless Multi-Port Print Server that allows you to connect your USB printer or parallel printer directly to your network. Now you can locate printer services virtually anywhere in your home or office. The DP-G321 manages the flow of print files from
  • D-Link DP-G321 | Product Manual - Page 5
    . (See the PS Admin User's Guide, available on the CD that came with the DP-G321, for information about configuring the print server's ports.) The Print Server also supports web configuration permitting users to configure settings through the web browser. The default IP Address is as follows
  • D-Link DP-G321 | Product Manual - Page 6
    lit LED indicates proper operation of the Print Server. Link/Activity A steadily lit LED indicates wireless network connection. A blinking LED indicates activity (configuration or printing). USB1 A steadily lit LED indicates that the Print Server is transferring print data to the USB1 printer port
  • D-Link DP-G321 | Product Manual - Page 7
    The port supports the NWay protocol, allowing the Print Server to automatically detect or negotiate the transmission speed of the network. DC Power Connector The DC power input connector is located on the Print Server's rear panel and is labeled DC 5V. Antenna USB2 LAN Power LPT USB1 Reset 7
  • D-Link DP-G321 | Product Manual - Page 8
    and compatible high-speed wireless connectivity within your home, business or public access wireless networks. D-Link wireless products will allow you users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support
  • D-Link DP-G321 | Product Manual - Page 9
    technology with data transfer speeds of up to 54Mbps* when used with other D-Link AirPlus G devices. Installation Considerations The D-Link AirPlus G DP-G321 lets you print through your network, using a wireless connection, from virtually anywhere within its operating range. Keep in mind, however
  • D-Link DP-G321 | Product Manual - Page 10
    Setting up the DP-G321 Installing the Print Server WARNING: Configuration problems may result if the Print Server is powered up without first establishing its network connection. Follow this procedure to avoid complications at the configuration stage. 1. Confirm proper operation of your printer
  • D-Link DP-G321 | Product Manual - Page 11
    DP-G321 has been factory-tested to operate properly. When the DP-G321 during this LED test may mean there is a problem with the LED itself. The actual component tests 1 long 18 short Faulty Component Need to reload firmware DRAM error Timer INT error Flash Protected Flash Erase/Program error
  • D-Link DP-G321 | Product Manual - Page 12
    cable, connect the DP-G321 to the Ethernet-adapter equipped computer in your network that you will be using for configuration. Open your web browser and type http://192.168.0.10 in the address box, and press Enter. This set of numbers is the default IP Address of your Print Server. Please note that
  • D-Link DP-G321 | Product Manual - Page 13
    the DP-G321's System Status and Printer Status. Home > System As shown here, the System displays the status of your print server, printer, and network. Clicking Refresh will update the information. Device Status: Information about the print server, including the firmware version, MAC/IP address
  • D-Link DP-G321 | Product Manual - Page 14
    button in the left column to display information about the wireless LAN. Clicking Refresh will update the information. Wireless Status: The items in this field display information about the wireless LAN, such as the connection mode (Infrastructure or Ad-Hoc), SSID, channel, data transfer rate
  • D-Link DP-G321 | Product Manual - Page 15
    about the wireless LAN. Clicking Refresh will update the information. Auto IP: This field contains the current settings of TCP/IP, including DHCP Network > TCP/IP. TCP/IP Printing: In this field, you can monitor the status of your printing tasks through TCP/IP. Microsoft Network Printing: In this
  • D-Link DP-G321 | Product Manual - Page 16
    Using the Web Configuration (continued) Home > User Click the User button in the left column to display the user's information. Users Printing Log: The items in this field display the user(s) information, which include the user(s) Mac address, IP address, name, and status of printing tasks. 16
  • D-Link DP-G321 | Product Manual - Page 17
    Setting This option will show you settings required to configure the DP-G321 Print Server. Consult your printers owner manual for the PJL (Printer Job Language) and print speed supported on your printer. Click the Save button on the bottom of the configuration page to ensure the settings are updated
  • D-Link DP-G321 | Product Manual - Page 18
    ): Assign the Admin's contact name for the print server. Password: Enter the Administrator password (3-8 characters). To set up the password, please enter the password in the New Password box, and then enter the same one again in the Confirm Again box. Port Settings In this field, you can assign the
  • D-Link DP-G321 | Product Manual - Page 19
    the name or select one from the pull-down menu. To search the available print server within the network, click the Site Survey button. Wireless Channel: Select the channel from the pull-down menu. The default setting is 6. Transmission Rate: Select the data transmit rate from the pull-down menu
  • D-Link DP-G321 | Product Manual - Page 20
    Using the Web Configuration (continued) Network 20
  • D-Link DP-G321 | Product Manual - Page 21
    IP address manually or automatically. When you choose Manually Assign, you should enter the related information in the following boxes, including IP Address, Subnet Mask, and Default Gateway. DNS Server Address: Input the DNS (Domain Name Server) IP you want the print server associated with in this
  • D-Link DP-G321 | Product Manual - Page 22
    Configuration (continued) Configuration > User Printing Control By configuring the Enable User Printing Control option (Yes or No), the user in the User List is permitted to access the print server or not. Define Users You can add/delete the user(s) to/from the User List. The User List at the bottom
  • D-Link DP-G321 | Product Manual - Page 23
    Using the Web Configuration (continued) Configuration > SNMP SNMP Management SNMP (Simple Network Management Protocol) is a set of protocols for managing complex networks. Community 1/2/3: Enter a name in the Name box, and configure the Access Right by selecting Read Only or Read/Write from the
  • D-Link DP-G321 | Product Manual - Page 24
    ) Tools Click on the Tools link from the tools bar of the main screen to enter the Tools Page; it provides the control options that include Print Test, E-mail, Reset, Upgrade, and Backup. Tools > Print Test Print Test Click Test to print a test page from the selected USB or parallel port. 24
  • D-Link DP-G321 | Product Manual - Page 25
    in this box. Outgoing E-mail (SMTP) Server Address: Enter the server address that is used to send your E-mail in this box. If your mail server needs to verify the user when sending E-mail, the DP-G321 will apply the same Account Name and Password to the mail server as it does when receiving E-mail
  • D-Link DP-G321 | Product Manual - Page 26
    given administrator's Email address. Receive E-mail: Click Yes to immediately check and receive E-mail, and then print out the mail when available. Reset Reset Click Apply to immediately reset the print server. Factory Reset Click Apply to reload the factory default settings of the print server. 26
  • D-Link DP-G321 | Product Manual - Page 27
    Using the Web Configuration (continued) Tools > Upgrade Firmware Upgrade When a new version of firmware is available (e.g., downloaded from the manufacturer's website), you can upgrade the firmware of your print server. Click Browse to locate the firmware file, then click Apply. 27
  • D-Link DP-G321 | Product Manual - Page 28
    Using the Web Configuration (continued) Tools > Backup Backup Device Configuration to File Click Apply to backup your current configuration of the print server to file and then save in the computer. Restore Device Configuration from File You can reload a configuration that you saved before. Click
  • D-Link DP-G321 | Product Manual - Page 29
    screen to enter the Help Page. This page provides a link to D-Link's support website. D-Link's support website will provide the most up to date information on your DP-G321 Print Server. Please check the website regularly for product and firmware updates. Click on each topic for more information on
  • D-Link DP-G321 | Product Manual - Page 30
    TCP/IP Printing for Windows XP Open the web browser, and type in the IP Address of the DP-G321. For example, type http://192.168.0.10 into the Location or Address field. Press the Enter or (Return) Key. Note: The PC's IP Address must be in the same subnet as the Print Server's IP Address for the two
  • D-Link DP-G321 | Product Manual - Page 31
    TCP/IP Printing for Windows XP (continued) At the Configuration window, write down the Port Names for future reference. You will need this information later in the configuration process. 31
  • D-Link DP-G321 | Product Manual - Page 32
    TCP/IP Printing for Windows XP (continued) Select your Connection Mode. Enter the SSID of the remote access point or wireless router you wish to connect to. If you would like to set WEP Encryption, select the encryption level and the key here. Click Apply. 32
  • D-Link DP-G321 | Product Manual - Page 33
    TCP/IP Printing for Windows XP (continued) When you select TCP/IP Protocol at the Network window, the screen below appears. (We recommend that you keep the default settings as shown.) If you need to make changes, make sure to click Apply after you have made the changes. (You may wish to make a
  • D-Link DP-G321 | Product Manual - Page 34
    TCP/IP Printing for Windows XP (continued) Go to Start > Settings > Printers and Faxes > Add a Printer Click Next. 34
  • D-Link DP-G321 | Product Manual - Page 35
    TCP/IP Printing for Windows XP (continued) Select Local Printer. Deselect Automatically detect and install my Plug and Play printer. Click Next. Select Create a new port. At the pull-down menu, highlight Standard TCP/IP Port. Click Next. Click Next. 35
  • D-Link DP-G321 | Product Manual - Page 36
    TCP/IP Printing for Windows XP (continued) Type in the IP address of the Print Server (i.e. 192.168.0.10). The Port Name will automatically be filled in. Select Custom. Then click Settings. Select LPR. Input the Port Name of the port being used by the printer. Click OK. 36
  • D-Link DP-G321 | Product Manual - Page 37
    TCP/IP Printing for Windows XP (continued) Click Next. Click Finish. Highlight the printer, as shown. If the desired printer is not on the list, click Have Disk and insert the printer driver disk that came with your printer to install the printer drivers. Click Next. 37
  • D-Link DP-G321 | Product Manual - Page 38
    TCP/IP Printing for Windows XP (continued) At this screen, you can input a name for the printer. Click Next. Click Next. Click Finish. 38
  • D-Link DP-G321 | Product Manual - Page 39
    TCP/IP Printing for Windows 2000 Open the Web browser, and type in the IP Address of the DP-G321. For example, type http://192.168.0.10 into the Location or Address field. Press the Enter or (Return) Key. Note: The PC's IP Address must be in the same subnet as the Print Server's IP Address for the
  • D-Link DP-G321 | Product Manual - Page 40
    TCP/IP Printing for Windows 2000 (continued) At the Configuration window, write down the Port Names for future reference. You will need this information later in the configuration process. 40
  • D-Link DP-G321 | Product Manual - Page 41
    TCP/IP Printing for Windows 2000 (continued) Select your Connection Mode. Enter the SSID of the remote access point or wireless router to which you wish to connect. If you would like to set WEP Encryption, select the encryption level and the key here. Click Apply. 41
  • D-Link DP-G321 | Product Manual - Page 42
    TCP/IP Printing for Windows 2000 (continued) When you select TCP/IP Protocol at the Network window, the screen below appears. (We recommend that you keep the default settings as shown.) If you need to make changes, make sure to click Apply after you have made the changes. (You may wish to make a
  • D-Link DP-G321 | Product Manual - Page 43
    TCP/IP Printing for Windows 2000 (continued) Go to Start > Settings > Printers. Double-click on the Add Printer icon. Click Next. 43
  • D-Link DP-G321 | Product Manual - Page 44
    TCP/IP Printing for Windows 2000 (continued) Select Local Printer. Click Next. Select Create a new port at the pull-down menu, highlight Standard TCP/IP Port. Click Next. 44
  • D-Link DP-G321 | Product Manual - Page 45
    TCP/IP Printing for Windows 2000 (continued) Click Next. Type in the IP address of the Print Server in the Printer Name or IP Address field. The Port Name field will automatically be filled in. Click Next. Select "Custom." Then click on Settings. 45
  • D-Link DP-G321 | Product Manual - Page 46
    TCP/IP Printing for Windows 2000 (continued) Select LPR. Input the port name of the port being used by the printer. Click OK. Click Next. Click Finish. 46
  • D-Link DP-G321 | Product Manual - Page 47
    TCP/IP Printing for Windows 2000 (continued) Highlight the printer, as shown. If the desired printer is not on the list, click Have Disk and insert the printer driver disk that came with your printer to install the printer drivers. Click Next. At this screen, you can input a name for the printer.
  • D-Link DP-G321 | Product Manual - Page 48
    TCP/IP Printing for Windows 2000 (continued) Select Do not share this printer. . Click Next. Select Yes to print a test page. Click Next. Click Finish. The printer is now ready for printing with Windows 2000 on your network. 48
  • D-Link DP-G321 | Product Manual - Page 49
    TCP/IP Printing for Windows 98SE/Me Open the web browser, and type in the IP Address of the DP-G321. For example, type http://192.168.0.10 into the Location or Address field. Press the Enter or (Return) Key. Note: Your PC's IP Address must be in the same subnet as the Print Server's IP Address for
  • D-Link DP-G321 | Product Manual - Page 50
    TCP/IP Printing for Windows 98SE/Me (continued) At the Configuration window, write down the Port Names for future reference. You will need this information later in the configuration process. The Port Name shown here is only an example. 50
  • D-Link DP-G321 | Product Manual - Page 51
    TCP/IP Printing for Windows 98SE/Me(continued) Select your Connection Mode. Enter the SSID of the remote access point or wireless router to which you wish to connect. If you would like to set WEP Encryption, select the encryption level and the key here. Click Apply. 51
  • D-Link DP-G321 | Product Manual - Page 52
    TCP/IP Printing for Windows 98SE/Me(continued) When you select TCP/IP Protocol at the Network window, the screen below will appear. (We recommend that you keep the default settings as shown.) If you need to make changes, make sure to click Apply after you have made the changes. (You may wish to make
  • D-Link DP-G321 | Product Manual - Page 53
    TCP/IP Printing for Windows 98SE/Me (continued) Go to Start > Settings > Control Panel. Double-click on Network. Click Add. Highlight Client. Click Add. 53
  • D-Link DP-G321 | Product Manual - Page 54
    TCP/IP Printing for Windows 98SE/Me (continued) At this window, click Have Disk. 1. Insert the DP-G321 CD-ROM into your CD-ROM drive. Select the letter representing the CD-ROM drive on your computer from the pull-down menu. 2. Double-click
  • D-Link DP-G321 | Product Manual - Page 55
    TCP/IP Printing for Windows 98SE/Me (continued) Click OK. You should now be back to the Network Properties Page. Highlight LPR for TCP/IP Printing. Click Properties. 55
  • D-Link DP-G321 | Product Manual - Page 56
    TCP/IP Printing for Windows 98SE/Me (continued) Click Add Port. Type in the IP Address of the DP-G321. Make sure the Port Name is accurate. (The Port Name at right is just an example.) Click OK. The Port name and IP Address will be displayed. (The Port Name at right is just an example.) Click OK. 56
  • D-Link DP-G321 | Product Manual - Page 57
    TCP/IP Printing for Windows 98SE/Me (continued) Click OK. Windows will ask for a restart. Click Yes. 57
  • D-Link DP-G321 | Product Manual - Page 58
    TCP/IP Printing for Windows 98SE/Me continued) Once your computer has rebooted, click on Start > Settings > Printers > Add Printer. When the Add Printer Wizard screen appears, click Next. Select Network Printer. Click Next. Type in the path if you know it, or click Browse. 58
  • D-Link DP-G321 | Product Manual - Page 59
    TCP/IP Printing for Windows 98SE/Me (continued) At the next screen, browse for the printer port. Highlight the port as shown. (The Port Name in this window is just an example.) Click OK. If the network path is not specified, type in the IP Address of the DP-G321 and the Port Name. (The Port Name
  • D-Link DP-G321 | Product Manual - Page 60
    TCP/IP Printing for Windows 98SE/Me (continued) Select Yes to print a test page. Click Finish. Go to Start > Settings > Printers Check to see that your printer is installed. 60
  • D-Link DP-G321 | Product Manual - Page 61
    Unix/Linux Printing Please refer to the PS Admin Manual on the CD included with your purchase for information on setting up the Print Server in Unix/Linux. 61
  • D-Link DP-G321 | Product Manual - Page 62
    the instructions below for setting up the Print Server. After attaching the Print Server to your network using the directions provided in the Quick Installation Guide, change the IP address of your Macintosh to access the Print Server's web configuration. Open your System Preferences window and
  • D-Link DP-G321 | Product Manual - Page 63
    up Apple Talk or LPR Printing in Mac OS X (continued) The default IP address of the Print Server is 192.168.0.10. Manually change your IP Address to 102.168.0.x, where x is any number between 1 and 254 (except 10 which is the IP Address of the Print Server.) The IP Addresses and Subnet Mask shown
  • D-Link DP-G321 | Product Manual - Page 64
    Setting up Apple Talk or LPR Printing in Mac OS X (continued) To print, open a document and select File > Print from the menu. Select Edit Printer List from the Printer dialog box. Click Add Printer. 64
  • D-Link DP-G321 | Product Manual - Page 65
    OS X (continued) Select the printing protocol preferred, AppleTalk or LPR Printers using IP. In this example, AppleTalk has been selected. PS - 116688-U1 Laserwriter AppleTalk protocol: After selecting AppleTalk the Port Name of the Print Server will be displayed. The Port Name shown here is an
  • D-Link DP-G321 | Product Manual - Page 66
    LPR Printers using IP Protocol, this window will appear. Type the IP Address of the Print Server into the LPR Printer's Address field. PS-116688 - U1 In the Queue Name field, type in the Port Name of the PostScript printer that is connected to the Print Server. The Port Name illustrated here
  • D-Link DP-G321 | Product Manual - Page 67
    Web browser. 192.168.0.10 is the default IP Address of the DP-G321. „ Select the Network tab and scroll to the bottom to the AppleTalk protocol section. „ If your AppleTalk network is divided into AppleTalk zones, you will have to specify which zone the Print Server should be in. You should locate
  • D-Link DP-G321 | Product Manual - Page 68
    printer connected to your Print Server may vary slightly, depending on what printer driver version you are using. The procedure described below assumes you are using the LaserWriter 8. To choose a printer connected to your Print Server as your Mac OS workstation's default printer, Open the Chooser
  • D-Link DP-G321 | Product Manual - Page 69
    Printing from Mac OS Client Workstations (continued) If you have not previously set this printer as the default, your computer will can use the Setup button in the Chooser window. The selected printer will become your computer's default printer. You may need to choose Page Setup in any applications
  • D-Link DP-G321 | Product Manual - Page 70
    Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer to websites such as http://www.homenethelp.com and http://www.microsoft.com/windows2000 for information about
  • D-Link DP-G321 | Product Manual - Page 71
    Networking Basics (continued) Please follow all the instructions in this window: In this window, select the best description of your computer. If your computer connects to the Internet through a gateway/router, select the second option as shown. Click Next. 71
  • D-Link DP-G321 | Product Manual - Page 72
    Networking Basics (continued) Enter a Computer description and a Computer name (optional). Click Next. Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next. 72
  • D-Link DP-G321 | Product Manual - Page 73
    Networking Basics (continued) Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard configures the computer. This may take a few minutes. 73
  • D-Link DP-G321 | Product Manual - Page 74
    Networking Basics (continued) In this window, select the best option. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next. Insert a disk into the Floppy Disk
  • D-Link DP-G321 | Product Manual - Page 75
    Basics (continued) Please wait while the Network Setup Wizard copies the files. Please read the information under Here's how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on
  • D-Link DP-G321 | Product Manual - Page 76
    the computer. Click Yes to restart the computer. You have completed configuring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network. After running the Network Setup Disk on all your computers, your new wireless network will be ready to use. 76
  • D-Link DP-G321 | Product Manual - Page 77
    Networking Basics (continued) How to assign a Name to your computer To name your computer, please follow these directions in Windows XP: „ Click Start (in the lower left corner of the screen). „ Right-click My Computer. „ Select Properties. „ Select the Computer Name tab in the System
  • D-Link DP-G321 | Product Manual - Page 78
    computers on your network must have the same Workgroup name. „ Click OK. How to find your IP Address in Windows XP The computers connected to your network must be in the same IP address range. To verify the IP address, please do the following: „ Right-click on the Local Area Connection icon in the
  • D-Link DP-G321 | Product Manual - Page 79
    Networking Basics (continued) How to find your IP Address in Windows XP This window will appear. „ Click the Support tab. „ Click Close. Assigning a Static IP Address in Windows XP/2000 Note: DHCP-capable routers will automatically assign IP addresses to the computers on the network, using DHCP (
  • D-Link DP-G321 | Product Manual - Page 80
    Networking Basics (continued) Assigning a Static IP Address in Windows XP/2000 „ Double-click Network Connections. „ Right-click Local Area Connections. „ Double-click Properties. 80
  • D-Link DP-G321 | Product Manual - Page 81
    subnet mask must be the same for all the computers on the network.) „ Input your DNS server addresses. (Note: If you are entering a DNS server, you must enter the IP address of the Default Gateway.) The DNS server information will be supplied by your ISP (Internet Service Provider.) „ Click OK. 81
  • D-Link DP-G321 | Product Manual - Page 82
    SNAP (auto-switching) Transport Protocols: TCP/IP, NetBEUI, AppleTalk/EtherTalk, LPR,SMB TCP/IP Protocols Supported: BOOTP, SNMP, Telnet, TFTP, FTP, Emissions: FCC Class B, CE Class B, VCCI Class B *Maximum wireless signal rate based on IEEE Standard 802.11g specifications. Actual data throughput
  • D-Link DP-G321 | Product Manual - Page 83
    web page and download the latest print drivers for your OS. Q: I have another manufacturer's wireless router and can not get the print server to connect. A: You will need to first change the IP address of your print server to match that IP address scheme of your wireless router. Ex: D-Link uses "192
  • D-Link DP-G321 | Product Manual - Page 84
    to Friday 8:30am to 9:00pm EST D-Link Technical Support over the Internet: http://support.dlink.ca email:[email protected] When contacting technical support, please provide the following information: • Serial number of the unit • Model number or product name • Software type and version number 84
  • D-Link DP-G321 | Product Manual - Page 85
    ) that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. Limited Software Warranty: D-Link warrants that the software portion of the product ("Software") will substantially conform to D-Link's then current functional
  • D-Link DP-G321 | Product Manual - Page 86
    covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone other than D-Link; Products that have been
  • D-Link DP-G321 | Product Manual - Page 87
    Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user if not installed and used in accordance with the instructions, may cause harmful interference to radio communication.
  • D-Link DP-G321 | Product Manual - Page 88
    Registration Register your D-Link product online at http://support.dlink.com/register/ (10/07/04) 88
  • D-Link DP-G321 | Product Manual - Page 89
    Appendix: DP-G321 Printer Compatibility List For Windows The Canon Printer Canon BJC-55, 85 Canon S100SP Canon S200SP Canon S300 Canon S330 Canon S400SP Canon S450 Canon S520 Canon S600 Canon S750
  • D-Link DP-G321 | Product Manual - Page 90
    Appendix: DP-G321 Printer Compatibility List for Windows (continued) The Lexmark Printer Lexmark 4039 10R Lexmark 5700 Lexmark Optra Color 45 Lexmark Z53 Other printers from the brands listed above may also be supported. For an updated compatibility list please visit: http://www.support.dlink.com 90
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Manual
Building Networks for People
Wireless Print Server
D-Link DP-G321
Air
Plus G