D-Link DSL-2320B Product Manual - Page 59

Statically Assign an IP address - manual connect to static ip

Get D-Link DSL-2320B - 24 Mbps DSL Modem PDF manuals and user guides
UPC - 790069298257
View all D-Link DSL-2320B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

Appendix A - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/modem, or you need to assign a static IP address, please follow the steps below: Step 1 Windows® XP - Click on Start > Control Panel > Network Connections. Windows® 2000 - From the desktop, right-click My Network Places > Properties. Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your modem. Example: If the modem´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your modem (192.168.0.1). Set Primary DNS the same as the LAN IP address of your modem (192.168.0.1).The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DSL-2320B ADSL2+ Ethernet/USB Modem User Manual 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
59
D-Link DSL-±3±0B ADSL±+ Ethernet/USB Modem User Manual
Appendix A - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/modem, or you need to assign a static IP address, please follow the
steps below:
Step 1
Windows
®
XP - Click on
Start
>
Control Panel
>
Network Connections
.
Windows
®
±000 - From the desktop, right-click
My Network Places
>
Properties
.
Step 2
Right-click on the
Local Area Connection
which represents your D-Link network adapter and select
Properties
.
Step 3
Highlight
Internet Protocol (TCP/IP)
and click
Properties
.
Step 4
Click
Use the following IP address
and enter an IP address that is on the same subnet as your network or the LAN
IP address on your modem.
Example: If the modem´s LAN IP address is 19±.168.0.1, make your IP address
19±.168.0.X where X is a number between ± and 99. Make sure that the number
you choose is not in use on the network. Set Default Gateway the same as the LAN
IP address of your modem (19±.168.0.1).
Set Primary DNS the same as the LAN IP address of your modem (19±.168.0.1). The
Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.