D-Link DSL-2320B Quick Installation Guide - Page 6

Installing the Modem Connect the ADSL and Telephone Lines • Connect an RJ-11 cable between the wall phone jack and the lineend of the splitter (see diagram below). • Attach another RJ-11 phone cable to the modem-end of the splitter and the ADSL port on the rear panel of the modem. • The phone-end of the splitter will be connected to the telephone using a third RJ-11 phone cable. Note: See connections on the installation diagram. Connect the PC to the Modem • To use the Ethernet connection, connect the Ethernet cable from the computer directly to the modem. Connect one end of the Ethernet cable to the port labeled LAN on the back of the modem and attach the other end to the Ethernet port of your computer. • Or, you can use the supplied USB cable to connect your computer directly to the modem. Connect one end of the USB cable to the USB port on the back of the modem and connect the other end to a free USB port on your PC. The Found New Hardware Wizard will open on your PC. See Installation Diagram on page 7. • If your LAN has more than one computer, you can attach one end of an Ethernet cable to a hub or a switch and the other to the Ethernet port (labeled LAN) on the modem. Note that either a crossover or straight-through Ethernet cable can be used. The modem automatically recognizes the type of connection that is required. D-Link DSL-2320B Quick Install Guide