D-Link DSM-320 Product Manual - Page 32
Connecting the DSM-320 - remote
UPC - 790069267192
View all D-Link DSM-320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Connecting the DSM-320 All audio, video, and networking connections are located on the rear panel of the DSM-320. Video Connections Be sure the PAL/NTSC switch is set to NTSC if you are located in the USA. Select one of three ways to connect video to your DSM-320: • Composite Video Connector Plug the supplied yellow video cable into the DSM-320 and the matching opposite end of the cable to your television input. • S-Video Connector Plug the supplied S-Video cable into the S-Video connector and the opposite end into the S-Video connector on your television. • Component Connectors Match the color coded cables to the matching connectors on the DSM-320 and into the component video input of your television. Note: This cable is not supplied. The VIDEO OUT button on the remote control toggles between the composite/S-Video output and the component output. If component connectors are used but not selected, the screen will be tinted blue. 32