D-Link DSN-4100 DSN Series SAN Arrays VMWare ESX Manual - Page 19
Select iSCSI software adapter under storage. You should now see your iSCSI Target name, listed.
View all D-Link DSN-4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
xStack Storage DSN-Series SAN Arrays VMware ESX 3.0.2 & 3.5 6. The iSCSI initiator Properties window appears. 7. Under the general tab select Configure tab. Select the Enabled checkbox and click OK. Select Close. Figure 15: iSCSI software initiator properties window 8. Select iSCSI software adapter under storage. You should now see your iSCSI Target name listed. Figure 16: iSCSI software initiator properties window D-Link Systems, Inc. December 2, 2009 Page 19
xStack Storage DSN-Series SAN Arrays
VMware ESX 3.0.2 & 3.5
D-Link Systems, Inc.
Page
19
December 2, 2009
6. The iSCSI initiator Properties window appears.
7. Under the general tab select Configure tab. Select the
Enabled
checkbox and click
OK
. Select Close.
Figure 15: iSCSI software initiator properties window
8. Select iSCSI software adapter under storage. You should now see your iSCSI Target name
listed.
Figure 16: iSCSI software initiator properties window