D-Link DSN-640 User Manual for DSN-6410 - Page 83
Reset to factory default, Import and export
View all D-Link DSN-640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
master ones no matter what the firmware version of slave controller is newer or older than master. In normal status, the firmware versions in controller 1 and 2 are the same as below figure. Figure 4.6.4.1 4.6.5 Reset to factory default "Reset to factory default" allows user to reset IP SAN storage to factory default setting. Figure 4.6.5.1 Reset to default value, the password is: 123456, and IP address to default 192.168.0.32. 4.6.6 Import and export "Import and export" allows user to save system configuration values: export, and apply all configuration: import. For the volume configuration setting, the values are available in export and not available in import which can avoid confliction / date-deleting between two IP SAN storages which mean if one system already has valuable volumes in the disks and user may forget and overwrite it. Use import could return to original configuration. If the volume setting was also imported, user's current volumes will be overwritten with different configuration. Figure 4.6.6.1 83