D-Link DWA-F18 Datasheet - Page 2

Technical Specifications General Standards Antenna Type IEEE 802.11ax/ac/b/g/n Integrated antenna / DWA-F18 Requirements Operating System Interface Windows 10 OS support Available USB port Supports USB 3.2 Gen 1 (USB 3.0) standard2 Physical Dimensions (L x W x H) Weight Power Temperature Humidity Certifications 95 x 30 x 10 mm 23.6 g Power consumption: Standby mode - 154 mA Operating mode - 464 mA Operating: 0 to 40° C (32 to 104° F) Operating: 10% to 90% (non-condensing) FCC Class B CE Operating voltage: 5.0 V DC ± 10% Storage: -20 to 75˚ C (-4 to 167° F) Storage: 5% to 95% (non-condensing) IC Software Software Go to oculus.com/setup to download and install the Quest Link software Order Information Part Number DWA-F18 Description VR Air Bridge 1 Maximum wireless signal rate derived from IEEE 802.11ax specifications. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors may adversely affect wireless signal range. An 802.11ax client device is required to achieve maximum speeds and performance. Any latency improvement requires that the router and all clients support OFDMA and 802.11ax. 2 Using a USB 1.1 or USB 2.0 port will affect device performance. Direct connection to a USB 3.0 port recommended. Specifications are subject to change without notice. © 2021 D-Link. All Rights Reserved. D-Link and the D-Link logo are trademarks or registered trademarks of D-Link. All other third-party marks mentioned herein may be trademarks of their respective owners.