D-Link DWS-3160-24TC DWS-3160 Series CLI Reference Guide - Page 784

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide setting on this radio. WLAN Utilization - Displays the total network utilization for the physical radio. This value is based on radio statistics. Medium Time Unallocated - Displays the amount of configured medium time available for non- roaming and roaming clients for the designated access category on this radio. This value is in units of 32 microseconds-per-second (usecs/sec). Medium Time Roaming Unallocated - Displays the amount of configured medium time available for roaming clients only for the designated access category on this radio. This value is in units of 32 microseconds-per-second (usecs/sec). VAP ID - Displays the integer ID used to identify the VAP (0-7), this is used to uniquely identify the VAP for configuration via CLI/SNMP. VAP MAC Address - Displays the Ethernet address of the VAP. SSID - Displays the network assigned to the VAP. The network for each VAP is configured within the AP profile and the SSID is based on the network configuration. Client Assoc - Displays the total number of clients currently associated to the VAP. Operational Status - Displays the current operational status of the designated access category on this VAP. Neighbor AP MAC - Displays the Ethernet MAC address of the neighbor AP network, this could be a physical radio interface or VAP MAC address. For Broadcom APs, this is always a VAP MAC address. The neighbor AP MAC address may be cross-referenced in the RF Scan status. RSSI - Displays the Received Signal Strength Indication, this is an indicator of the signal strength relative to the neighbor and may give an idea of the neighbor's distance from the managed AP. Status - Displays the managed status of the AP, whether this is a valid AP known to the switch or a Rogue on the network. The valid values are: Managed - The neighbor AP is managed by this switch or another switch within the peer group. The neighbor AP status can be referenced using its base MAC address. Unknown- The neighbor APs detected in the RF scan are initially categorized as "Unknown" APs. Standalone - The AP is managed in standalone mode and configured as a valid AP entry (local or RADIUS). Rogue - The AP intrusion Detection function has determined that the AP is posing a threat to the network and categorizes the neighbor AP as rogue. Age - Displays the time since this AP or client was last reported from an RF scan on the radio. Discovery Reason - Displays one or more discovery methods for the neighbor client. One of more of the following abbreviated values may be displayed: RF Scan (RF) - The client was reported from an RF scan on the radio. Note that client stations are difficult to detect via RF scan; the other methods are more common for client neighbor detection. Probe Request (Probe) - The managed AP received a probe request from the client. Associated to Managed AP (Assoc Managed AP) - This neighbor client is associated to another managed AP. Associated to this AP (Assoc this AP) - The client is associated to this managed AP on the displayed radio. Associated to Peer AP (Assoc peer AP) - The client is associated to a peer switch managed AP. Ad Hoc Rogue (Ad Hoc) - The client was detected as part of an Ad Hoc network. WLAN Packets Received - Displays the total packets received by the AP on the wireless network. WLAN Bytes Received - Displays the total bytes received by the AP on the wireless network. WLAN Packets Transmitted - Displays the total packets transmitted by the AP on the wireless network. WLAN Bytes Transmitted - Displays the total bytes transmitted by the AP on the wireless network. WLAN Packets Receive Dropped - Displays the total receive packets discarded by the AP on the wireless network. WLAN Bytes Received Dropped - Displays the total receive bytes discarded by the AP on the wireless network. 780