DELPHI SKYFi2 Installation Guide - Page 7

3. Turn off the radio and SKYFi2 5. The SKYFi2 Vehicle Adaptor Kit b. Vent mount: Assemble the 7 Receiver. Disconnect all cables. has three mounting options: flat mount (if not assembled) by 4. Find a place where you can mount mount, vent mount, or swivel inserting the two clips into the your SKYFi2 Vehicle Adaptor mount. main piece. Clip the assembly where it is most convenient for a. Flat mount: Use the included onto the vent, and then posi- you to use. It should be mounted Velcro pads or extra adhesive tion the pivoting kickstand at to a hard, flat surface if possible or pad, attaching them to the back the bottom. The orientation of to a horizontal in-dash air vent. Be of the SKYFi2 vehicle cradle the clips must match each certain the air vent is rigid enough and then to a flat surface in other and may need to be to hold the weight of both the your vehicle. Do not install the rotated in one of two possible SKYFi2 Receiver and the SKYFi2 mount on a leather surface. orientations depending on the Vehicle Adaptor Kit. design of the air vent being used. Be careful when installing and removing the vent mount clips to prevent damaging the vent fins.