DIRECTV D10 Installation Guide - Page 28
GetPrimaryStatusMT 0x8A
View all DIRECTV D10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
DIRECTV Set-Top Box Information for the Installer Return Response Return Value Description 0x0E - 0x1F Reserved ACK_FCNOK : Success NACK_FCNOK : Failure 0x0000 : Success 0x0001 : Failure - Command not supported for specified device. Others : Failure - Bad command The command gives the number of DIRECTV and ATSC tuners. It also lists the tuner type and designations. The STB returns a unique Tuner ID for each tuner regardless if it is a DIRECTV or ATSC tuner. This Tuner ID may be used as input to the multituner commands. 5.16 GetPrimaryStatusMT (0x8A) Command Label Command Byte Input Parameter(s) Return Data Stream GetPrimaryStatusMT 0x8A [TunerID TunerID : 0x01 - 0xFF [MajorChnHI] [MajorChnLO] [MinorChnHI] [MinorChnLO] [Primary Type] [Audio Type] [Data Type] [Primary SCIDHI] [Primary SCIDLO] [Audio SCIDHI] [Audio SCIDLO] [Data SCIDHI] [Data SCIDLO] [NetworkHI] [NetworkLO] [Xponder] [Year] [Month] [Day] [Hour] [Min] [Sec] [Day Of Week] [ROMVer3] [ROMVer2] [ROMVer1] [ROMVer0] [STS ID0] [STS ID1] [STS ID2] [STS ID3] [STS Ver] [CAM ID0 ][CAM ID1] [CAM ID2] [CAM ID3] [CAM ID4] [CAM ID5] [Signal Quality] [Rx ID0] [Rx ID1] [RxID2] [RxID3] [RxID4] [RxID5 MajorChnHI and MajorChnLO (Major Channel Number): 0x0000 - 0xFFFF MinorChnHI and MinorChnLO (Minor Channel Number): DIRECTV, Inc. Version 2.2 Page 28 of 42 March 5, 2008 DTV-MD-0058