Danby DPAC12012P Product Manual - Page 6

FEATURES OF THE CONTROL PANEL Igo OPERATION LCD Display OnnOe0Fcakg 0 8B1-tr STOP KEY PAD FUNCTIONS sa POWER SWITCH: Turns unit ON/OFF MODE: Allows you to scroll through and select desired operating mode. FAN: Select from three different fan settings; High, Medium, and Low. AUTO-TINIER AUTO-TINIER Adjust: AUTO TURN OFF- With machine in running mode, NOTE: By pressing both buttons at the same time for more than 3 seconds, the display will toggle between Celsius and Fahrenheit. Warning Light Condensed water may accumulate in the unit. If the internal tank becomes full, the Warning signal in the LCD Display will light up and the unit will not operate until it has been drained. LCD Display press timer button to set timer control. Press " + " or" - " buttons to select number of hours you would like the unit to run before it automatically shuts off. Cooling Mode dl Dehumidify Mode Fan Only Mode AUTO TURN ON- With machine in stand by mode, press timer button to set timer control. Press " + " or" - "buttons to select number of hours before the unit automatically starts running under any one mode. Z High Fan Speed Medium Fan Speed Low Fan Speed Bag Display Set Temperature NOTE: The time is adjustable between 1-24 hours. 0B131-r Display Timer Setting of Auto Switch ON / OFF TEMPERATURE Adjust: • Used for adjusting the thermostat. • The default display is room temperature. El] Warning Light (the machine will stop running) • In cooling mode, when" + "or" - "button is pressed, the set temperature is displayed and may be adjusted. After 15 seconds the display will revert back to room temperature. Temperature is only adjustable in cool mode.