Danby DPAC9009 Use and Care Manual - Page 7

OPERATION- Features of the Control Panel Warning Light Receiving Sensor KEY PAD FUNCTIONS POWER SWITCH:Turns unit ON/OFF MODE: Allows you to scroll through and select desired operating mode. NOTE: By pressing both buttons at the same time for more than 3 seconds, the display will toggle between Celsius and Fahrenheit. FAN: Select from three different fan settings; High, Medium, and Low. AUTO-TIMER AUTO-TIMER Adjust: Warning Light Condensed water may accumulate in the unit. If the internal tank becomes full, the Warning signal in the LCD Display will light up and the unit will not operate until it has been drained. Auto off- With machine in running mode, press LCD Display timer button to set timer control. Press buttons to select number of hours you Cooling Mode would like the unit to run before it automatically shuts off. Auto on- With machine in stand by mode, Dehumidify Mode Fan Only Mode press timer button to set timer control. Press buttons to select number of hours before High Fan Speed the unit automatically starts running in air Medium Fan Speed conditionning mode. Low Fan Speed NOTE: The time is adjustable between 1-24 hours. TEMPERATURE Adjust: • Used for adjusting the thermostat. • The default display is room temperature. • In cooling mode, when button is pressed, the set temperature is displayed and may be adjusted. After 15 seconds the display will revert back to room temperature. Temperature is only adjustable in cool mode. Display Set Temperature Display Timer Setting of Auto Switch ON / OFF Warning Light (the machine will stop running) 6