DeLonghi HVY1030 Series Owner Manual - Page 5

ATTENTION A safety device switches the fan heater off if it accidentally overheats. To reset the unit for normal operation, remove the plug from the outlet for a few minutes, eliminate the cause of overheating (e.g. air intake or outlet grilles obstructed) and then plug the fan heater back in again. Contact your nearest Service Center if the fan heater does not begin normal operation again. TROUBLESHOOTING PROBLEM The appliance doesn't work CAUSE SOLUTION • Be sure it is plugged in and that the • Plug into the outlet. electrical outlet is working. • Check for any obstruction. • Remove the obstruction, unplug the heater and let the appliance cool down. If the appliance doesn't work please contact the nearest service center. • The function selector is in the "0" posi- • Turn the function selector to the posi- tion. tion or "1" or "2". • The thermostat may be set too low. • Turn the thermostat clockwise to a higher setting until the heater restarts. 5