Dell 1410X User Guide - Page 46

Guiding Signals Projector Status Description Control Buttons Power Standby mode Warming up mode Lamp on Cooling mode Power Saving mode Cooling before Power Saving mode Projector overheated Lamp driver overheated Fan breakdown Lamp driver breakdown Color Wheel breakdown Fault - DC supply (+12V) Projector in Standby mode. Ready to power on. Projector takes some time to warm up and power on. Projector in Normal mode, ready to display an image. Note: The OSD menu is not accessed. Projector is cooling to shutdown. Power Saving mode has been activated. The projector will automatically enter standby mode, if an input signal is not detected in two hours. The projector takes 60 seconds to cool down before entering Power Saving mode. Air vents might be blocked or ambient temperature may be above 35ºC. The projector automatically shuts down. Ensure that the air vents are not blocked and that the ambient temperature is within operational range. If the problem persists, contact Dell. The lamp driver is overheated. The air vents may be blocked. The projector automatically shuts down. Turn the display on again after the projector cools down. If the problem persists, contact Dell. One of the fans has failed. The projector automatically shuts down. If the problem persists, contact Dell. The lamp driver has failed. The projector automatically shuts down. Unplug the power cord after three minutes then turn the display on again. If this problem persists, contact Dell. Color wheel cannot start. The projector has failed and the projector automatically shuts down. Unplug the power cord after three minutes and then turn on the projector. If this problem persists, contact Dell. Power supply has been interrupted. The projector automatically shuts down. Unplug the power cord after three minutes and then turn on the projector. If this problem persists, contact Dell. BLUE Flashing BLUE BLUE BLUE AMBER Flashing AMBER OFF AMBER ÒFF AMBER Flashing BLUE AMBER Flashing Indicator TEMP (Amber) LAMP (Amber) OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF AMBER OFF AMBER OFF AMBER Flashing OFF OFF AMBER Flashing AMBER Flashing AMBER Flashing AMBER AMBER 46 Troubleshooting Your Projector