Dell 6400 Owners Manual - Page 122
Release the Mini-Card by pushing the metal securing tabs toward the back of the computer until
UPC - 883585945313
View all Dell 6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
b Release the Mini-Card by pushing the metal securing tabs toward the back of the computer until the card pops up slightly. c Lift the Mini-Card out of its system board connector. 1 2 3 1 system board connector 2 Mini-Card 3 metal securing tabs (2) NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and realign the card. 5 Install the replacement Mini-Card: a Insert the Mini-Card connector into the system board connector at a 45-degree angle, and then press the other end of the Mini-Card down into the securing tabs until the card clicks into place. 122 Adding and Replacing Parts
122
Adding and Replacing Parts
b
Release the Mini-Card by pushing the metal securing tabs toward the back of the computer until
the card pops up slightly.
c
Lift the Mini-Card out of its system board connector.
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on
the card and on the system board, and realign the card.
5
Install the replacement Mini-Card:
a
Insert the Mini-Card connector into the system board connector at a 45-degree angle, and then
press the other end of the Mini-Card down into the securing tabs until the card clicks into place.
1
system board connector
2
Mini-Card
3
metal securing tabs (2)
1
2
3