Dell ALIENWARE AURORA Service Manual - Page 48
Removing the Processor Liquid-Cooling Assembly
UPC - 067540555575
View all Dell ALIENWARE AURORA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Removing the Processor Liquid-Cooling Assembly 1. Follow the instructions in "Before You Begin" on page 6. 5 2. Remove the left side-panel (see "Removing the Left Side-Panel" on page 11). WARNING: Despite having a plastic shield, the processor liquid-cooling assembly may be very hot during normal operation. Ensure that it has had sufficient time to cool before you touch it. 3. Disconnect the processor liquid-cooling assembly cable from the connectors (SYS FAN and CPU PUMP) on the top-lighting board. 4. Loosen the four captive screws that secure the processor liquid-cooling assembly to the system board. 5. Remove the four screws that secure the processor liquid-cooling assembly to the chassis rear wall. 6. Slide and lift the processor liquid-cooling assembly away from the chassis. CHAPTER 9: PROCESSOR LIQUID-COOLING ASSEMBLY 1 2 3 4 1 processor liquid-cooling assembly 2 top lighting-board 3 cables (2) 4 captive screws (4) 5 screws (4) 048 /048