Dell Alienware Steam Machine R2 Alienware Steam Machine R2 Service Manual - Page 36

Replacing the power-button board, Procedure, Post-requisites

Get Dell Alienware Steam Machine R2 PDF manuals and user guides View all Dell Alienware Steam Machine R2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Replacing the power-button board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Use the alignment posts on power-button board bracket to align the power-button board into the slot on the power-button board bracket. 2 Snap the power-button board in place on the power-button board bracket. 3 Route the power-button board cable through the cable-routing hole on the chassis. 4 Align and snap the power-button module into the slot on the front panel. 5 Connect the power-button board cable to the system board (RIMCON). 6 Turn the chassis over. 7 Route the antenna cable through the routing guides on the power-button board module. Post-requisites 1 Replace the top cover. 2 Replace the base cover. 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Replacing the power-button
board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before working inside your computer
.
After working inside your computer, follow the instructions
in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
.
Procedure
1
Use the alignment posts on power-button board bracket to align the
power-button board into the slot on the power-button board bracket.
2
Snap the power-button board in place on the power-button board bracket.
3
Route the power-button board cable through the cable-routing hole on the
chassis.
4
Align and snap the power-button module into the slot on the front panel.
5
Connect the power-button board cable to the system board (RIMCON).
6
Turn the chassis over.
7
Route the antenna cable through the routing guides on the power-button
board module.
Post-requisites
1
Replace the
top cover
.
2
Replace the
base cover
.
36