Dell B1160w Wireless Mono Laser Printer User's Guide - Page 91
Ad hoc via USB cable in Windows, Items to prepare
View all Dell B1160w Wireless Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Wireless network setup Ad hoc via USB cable in Windows If you do not have an access point (AP), you may still connect the machine wirelessly to your computer by setting up an ad-hoc wireless network by following the simple steps below. • Items to prepare - Network-connected computer - Software CD that was provided with your machine - The machine installed with a wireless network interface - USB cable 1 Check whether the USB cable is connected to the machine. 2 Turn on your computer and the wireless network machine. 3 Insert the supplied software CD into your CD-ROM drive. The software CD should automatically run and an installation window will appear. If the installation window does not appear, click Start > All programs > Accessories > Run. X:\Setup.exe replacing "X" with the letter, which represents your CDROM drive and click OK. 4 Select Next. 2. Using a Network-Connected Machine (B1160w only) 91