Dell B2375dnf Dell Mono MFP User's Guide - Page 335
Black s, Loose toner, Character Voids, zontal stripes
View all Dell B2375dnf manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 335 highlights
Condition Black pages A Suggested solutions • The toner cartridge may not be installed properly. Remove the cartridge and reinsert. • The toner cartridge may be defective and need replacing. Install a new toner cartridge. See "Replacing the Toner Cartridge". • The printer may require repair. Contact a service representative. Loose toner Character Voids A Horizontal stripes AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Curl • Clean the inside of the printer. See "Cleaning the Interior". • Check the paper type and quality. See "Identifying Print Media Sources and Specifications". • Install a new toner cartridge. See "Replacing the Toner Cartridge". • If the problem persists, the printer may require repair. Contact a service representative. Character voids have white areas where they should be solid black: • If you are using transparencies, try another type of transparency. Because of the composition of the transparency, some character voids are normal. • You may be printing on the wrong surface of the paper. Turn over the stack of paper in the paper tray. • The paper may not meet paper specifications. See "Identifying Print Media Sources and Specifications". If horizontally aligned black streaks or smears appear: • The toner cartridge may be installed improperly. Remove the toner cartridge and reinsert. • The toner cartridge may be defective. Install a new toner cartridge. See "Replacing the Toner Cartridge". • If the problem persists, the printer may require repair. Contact a service representative. If the printed paper is curled or the paper does not feed into the printer: • Turn over the stack of paper in the paper tray. Also try rotating the paper 180° in the paper tray. • Try printing to other rear door. - 334