Dell B5465dnf Mono Laser Printer MFP User's Guide - Page 90
Tips on using labels, Tips on using letterhead, Source, Printing, Printable side, Paper orientation - seals
View all Dell B5465dnf Mono Laser Printer MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Printing 90 - Have metal clasps, string ties, or folding bars. - Have an interlocking design. - Have postage stamps attached. - Have any exposed adhesive when the flap is in the sealed or closed position. - Have bent corners. - Have rough, cockle, or laid finishes. • Adjust the width guides to fit the width of the envelopes. • Before loading the envelopes on the tray, flex and fan the envelopes to loosen them. Straighten the edges on a level surface. Note: A combination of high humidity (over 60%) and high printing temperature may wrinkle or seal envelopes. Tips on using labels • From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the labels loaded in the tray. • Print samples on the labels being considered for use before buying large quantities. • Use labels designed specifically for laser printers. • Do not use labels with slick backing material. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets also contaminate the printer and the cartridge with adhesive, and could void the printer and toner cartridge warranties. • Do not use labels with exposed adhesive. Tips on using letterhead • Use letterhead designed specifically for laser printers. • Print samples on the letterhead being considered for use before buying large quantities. • Before loading letterhead, flex and fan the sheets to prevent them from sticking together. • Page orientation is important when printing on letterhead. Source Printing Printable side Paper orientation Trays One‑sided Facedown Load the sheet with the top edge toward the front of the tray. Trays Two‑sided Faceup Load the sheet with the bottom edge entering the printer first. Multipurpose feeder One‑sided Faceup Load the sheet with the top edge entering the printer first. Note: Check with the manufacturer or vendor to determine whether the preprinted letterhead is acceptable for laser printers.