Dell C1660w Color Laser Print User Guide - Page 131
WPS Setup, Reset Wireless, TCP/IP, Print PIN Code
View all Dell C1660w Color Laser Print manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
WPS Setup Purpose: To configure the wireless network using WPS. Values: Push Btn. Ctrl PBC Start*1 Configures the wireless setting with the security method of WPS-PBC. PIN Code Start Config. Configures the wireless setting using the PIN code assigned automatically by the printer. Print PIN Code Prints the PIN code. Confirm it when you enter the PIN code to your computer. *1 You can also start WPS-PBC by pressing and holding the (Wi-Fi | WPS) button. NOTE: WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed mode PSK, WPA-PSK AES, WPA2-PSK AES, WPA-PSK TKIP, Open (No Security) NOTE: For Dell C1760nw Color Printer, this item is displayed when the Ethernet cable is disconnected and Wireless LAN is set to Enable. NOTE: For Dell C1660w Color Printer, this item is displayed only when Wireless LAN is set to Enable. Reset Wireless Purpose: To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network settings are reset to their default values. NOTE: For Dell C1760nw Color Printer, this item is displayed when the Ethernet cable is disconnected and Wireless LAN is set to Enable. NOTE: For Dell C1660w Color Printer, this item is displayed only when Wireless LAN is set to Enable. TCP/IP Purpose: To configure TCP/IP settings. The change takes effect after the printer is turned off and then on. Values: IP Mode IPv4 Dual Stack* IPv4 Mode IPv6 Mode Get IP Address AutoIP* BOOTP RARP DHCP Panel IP Address Subnet Mask Gateway Address Uses both IPv4 and IPv6 to set the IP address. Uses IPv4 to set the IP address. Uses IPv6 to set the IP address. Automatically sets the IP address. Uses BOOTP to set the IP address. Uses RARP to set the IP address. Uses DHCP to set the IP address. Enables the IP address entered on the operator panel. Manually sets the IP address allocated to the printer. Manually sets the subnet mask. Manually sets the gateway address. Understanding the Printer Menus 129