Dell C1765nf Color Laser User Guide - Page 163

Fax Broadcast Print Disable Print On Error Print Always Fax Protocol Print Disable Print On Error Print Always Country Apply New Settings Restart printer to apply new settings Does not print a transmission report after a fax transmission to multiple destinations. Prints a transmission report only when an error occurs. Prints a transmission report after every fax transmission to multiple destinations. Does not print a protocol monitor report. Prints a protocol monitor report only when an error occurs. Prints a protocol monitor report after every fax transmission. Selects the country where the printer is used. After you complete the settings, click Apply New Settings to apply the changes. Click Restart printer to apply new settings to apply the changes. Diagnosis The Diagnosis tab contains the Chart Print, Environment Sensor Info, Clean Developer, and Refresh Mode pages. Chart Print Purpose: To print various charts that can be used for diagnosing your printer. Values: Pitch Configuration Chart Ghost Configuration Chart 4 Colors Configuration Chart MQ Chart Alignment Chart Drum Refresh Configuration Chart Click to print full halftone pages for yellow, magenta, cyan, and black. Also outputs pages to check the pitch. Click to print a chart to check for ghost printing. Click to print bands of yellow, magenta, cyan, and black with varying density. Click to print charts to check for the binding. Click to print a chart, and then check for proper alignment of the print image on the paper. Click to print a chart to check the light fatigue of the drum unit. Environment Sensor Info Purpose: To output the internal environment sensor information of the printer to Result by clicking Get Environment Sensor Info. Clean Developer Purpose: To rotate the developer motor and stir the toner in the toner cartridge. Values: Clean Developer Refresh Mode Purpose: Click Start to stir the toner. Understanding the Tool Box Menus 161