Dell DJ42F61 Owner's Manual - Page 69

CD/DVD Drive

Page 69 highlights

power cable data cable NOTICE: Match the colored strip on the cable with pin 1 on the drive (pin 1 is marked as "1"). 8 Reattach the front panel (see page 62). 9 Replace the computer cover (see page 75). NOTICE: To connect a network cable, first plug the cable in to the network wall jack and then plug it in to the computer. 10 Connect your computer and devices to their electrical outlets, and turn them on. See the documentation that came with the drive for instructions on installing any software required for drive operation. 11 Enter system setup (see "System Setup" on page 80) and update the appropriate Diskette Drive option. 12 Verify that your computer works correctly by running the Dell Diagnostics (see page 36). CD/DVD Drive CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover. 1 Follow the procedures in "Before You Begin" on page 45. 2 Remove the computer cover (see page 50). 3 Release and remove the front panel (see page 60). Removing and Installing Parts 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110

Removing and Installing Parts
69
NOTICE:
Match the colored strip on the cable with pin 1 on the drive (pin 1 is marked as "1").
8
Reattach the front panel (see page 62).
9
Replace the computer cover (see page 75).
NOTICE:
To connect a network cable, first plug the cable in to the network wall jack and then plug it in to the
computer.
10
Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for
drive operation.
11
Enter system setup (see "System Setup" on page 80) and update the appropriate
Diskette Drive
option.
12
Verify that your computer works correctly by running the Dell Diagnostics (see page 36).
CD/DVD Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the
Product Information Guide
.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before
opening the cover.
1
Follow the procedures in "Before You Begin" on page45.
2
Remove the computer cover (see page 50).
3
Release and remove the front panel (see page 60).
power cable
data cable