Dell Force10 S25N-S50N Dell Force10 S25 Systems Quick Start Guide - Page 17

2 Installing the Software Navigating CLI Modes The FTOS prompt changes to indicate the CLI mode. You must move linearly through the command modes, with the exception of the end command which takes you directly to EXEC Privilege mode; the exit command moves you up one command mode level. Console Access Access the command line through a serial console port or a Telnet session. When the system successfully boots, you enter the command line in the EXEC mode. NOTE: You must have a password configured on a virtual terminal line before you can Telnet into the system. Therefore, you must use a console connection when connecting to the system for the first time. Serial Console The RS-232 console port is labeled on the chassis. It is in the upper right-hand side, as you face the PSU side of the chassis. Installing the Software 15