Dell GX280DT Setup Guide - Page 7

1 hinged lever 2 indented tab (side view) Installing the DVI Adapter 1 card notch 2 card-clip lever 3 card-clip tab 4 card clip 5 PCI card slot 4. Press the card-clip lever toward the PCI card slot and gently press the card into the PCI Express x16 slot until it clicks into place. 5. Release the card-clip lever, ensuring that the tab on the card-clip lever fits into the notch on the front end of the card. 6. Secure the card by lowering the hinged lever on the back panel. 7. Close the computer cover. 8. Attach the computer stand (optional). NOTICE: To connect a network cable, first plug the cable into the network wall jack, and then plug it into the computer. 9. Connect the monitor cable to the card's video connector. 10. Connect your computer and devices to their electrical outlets, and turn them on. Mini-Tower Computer CAUTION: Before you begin any of the procedures in this section, follow the steps in "Safety Instructions." CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover. NOTICE: To disconnect a network cable, first unplug the cable from your computer, and then unplug it from the network wall jack. 1. Open the computer cover. 2. Remove the filler bracket by raising the hinged lever and sliding the bracket up. Installing the DVI Adapter 1 card notch