Dell Inspiron 13 7000 2-in-1 Series Inspiron 13 7359 Service Manual - Page 53
Replacing the I/O board, Procedure, Post-requisites, computer, follow the instructions
View all Dell Inspiron 13 7000 2-in-1 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Replacing the I/O board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Using the alignment posts, place the I/O board on the palmrest and keyboard assembly. 2 Align the screw hole on the I/O board with the screw hole on the palmrest and keyboard assembly. 3 Replace the screw that secures the I/O board to the palmrest and keyboard assembly. 4 Connect the power and volume-buttons board cable to the I/O board. 5 Connect the I/O-board cable to the I/O board. Post-requisites 1 Replace the coin-cell battery. 2 Replace the wireless card. 3 Replace the hard drive. 4 Replace the battery. 5 Replace the base cover. 53