Dell Inspiron 13Z 5323 Owner's Manual - Page 65

Replacing the Fan, Procedure, Postrequisites

Page 65 highlights

26 Replacing the Fan WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Procedure 1 Connect the fan cable to the system-board connector. 2 Align the screw holes on the fan with the screw holes on the computer base. 3 Replace the screw that secures the fan to computer base. 4 Adhere the LED-board cable over the fan. 5 Slide the LED-board cable into the system-board connector and press down on the connector latch to secure the cable. Postrequisites 1 Follow the instructions from step 4 to step 6 in "Replacing the Hard Drive" on page 55. 2 Replace the battery. See "Replacing the Battery" on page 33. 3 Replace the palm rest. See "Replacing the Palm Rest" on page 29. 4 Replace the keyboard. See "Replacing the Keyboard" on page 25. 5 Replace the base cover. See "Replacing the Base Cover" on page 19. 6 Follow the instructions in "After Working Inside Your Computer" on page 11. Replacing the Fan | 65

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106

Replacing the Fan
|
65
26
Replacing the Fan
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Procedure
1
Connect the fan cable to the system-board connector.
2
Align the screw holes on the fan with the screw holes on the computer base.
3
Replace the screw that secures the fan to computer base.
4
Adhere the LED-board cable over the fan.
5
Slide the LED-board cable into the system-board connector and press down on the
connector latch to secure the cable.
Postrequisites
1
Follow the instructions from step 4 to step 6 in "Replacing the Hard Drive" on
page 55.
2
Replace the battery. See "Replacing the Battery" on page 33.
3
Replace the palm rest. See "Replacing the Palm Rest" on page 29.
4
Replace the keyboard. See "Replacing the Keyboard" on page 25.
5
Replace the base cover. See "Replacing the Base Cover" on page 19.
6
Follow the instructions in "After Working Inside Your Computer" on page 11.