Dell Inspiron 14 7437 Owner's Manual - Page 18

Removing the Coin-Cell Battery, Prerequisites, Procedure

Page 18 highlights

Removing the Coin-Cell Battery WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before Working Inside Your Computer" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. CAUTION: Removing the coin-cell battery resets the BIOS settings to default. It is recommended that you note the BIOS settings before removing the coin-cell battery. Prerequisites 1 Remove the base cover. See "Removing the Base Cover" on page 10. 2 Remove the battery. See "Removing the Battery" on page 12. Procedure 1 Follow step 1 and step 2 from "Removing the Speakers" on page 14. 2 Disconnect the coin-cell battery cable from the system board. 3 2 1 1 coin-cell battery 3 coin-cell battery cable 2 routing guide 3 Remove the cable from the routing guides on the palm-rest assembly. 4 Remove the coin-cell battery from the palm-rest assembly. 18 | Removing the Coin-Cell Battery

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

18
|
Removing the Coin-Cell Battery
Removing the Coin-Cell Battery
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
CAUTION: Removing the coin-cell battery resets the BIOS settings to default.
It is recommended that you note the BIOS settings before removing the
coin-cell battery.
Prerequisites
1
Remove the base cover. See "Removing the Base Cover" on page 10.
2
Remove the battery. See "Removing the Battery" on page 12.
Procedure
1
Follow step 1 and step 2 from "Removing the Speakers" on page 14.
2
Disconnect the coin-cell battery cable from the system board.
3
Remove the cable from the routing guides on the palm-rest assembly.
4
Remove the coin-cell battery from the palm-rest assembly.
1
coin-cell battery
2
routing guide
3
coin-cell battery cable
1
2
3