Dell Inspiron 15 5567 Inspiron 15 5000 Service Manual - Page 68
Replacing the heat-sink assembly, Procedure, Post-requisites - fan replacement
View all Dell Inspiron 15 5567 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
GUID-9847FD24-88EC-4F5A-BCCF-D9D9830B777A Replacing the heat-sink assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. CAUTION: Incorrect alignment of the heat sink can damage the system board and processor. NOTE: The original thermal grease can be reused if the original system board and fan are reinstalled together. If either the system board or the fan is replaced, use the thermal pad provided in the kit to ensure that thermal conductivity is achieved. GUID-E36290DD-4C1A-4CCD-8DA7-7E8C384BAB63 Procedure 1 Place the heat-sink assembly on the system board. 2 Align the screw holes on the heat-sink assembly with the screw holes on the system board. 3 Replace the screws that secure the heat-sink assembly to the system board. 4 In sequential order (indicated on the heat-sink assembly), tighten the captive screws that secure the heat-sink assembly to the system board. 5 Connect the fan cable to the system board. GUID-E2AC4621-1706-4D78-B43A-E4F1677F3A12 Post-requisites 1 Replace the system-board assembly. 2 Replace the wireless card. 3 Replace the memory modules. 68