Dell Inspiron 15 N5010 Service Manual - Page 36
Replacing the Mini-Card
View all Dell Inspiron 15 N5010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
1 antenna cable connectors (2) 2 Mini-Card 3 screw 9. Remove the screw that secures the Mini-Card to the connector on the system board. 10. Lift the Mini-Card out of the connector on the system board. Replacing the Mini-Card 1. Follow the instructions in Before You Begin. 2. Remove the new Mini-Card from its packaging. CAUTION: Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector. CAUTION: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and realign the card. CAUTION: To avoid damage to the Mini-Card, never place cables under the card. 3. Insert the Mini-Card connector at a 45-degree angle into the connector on the system board. 4. Press the other end of the Mini-Card down into the slot on the system board and replace the screw that secures the Mini-Card to the connector on the system board. 5. Connect the appropriate antenna cables to the Mini-Card you are installing. The following table provides the antenna cable color scheme for the MiniCard supported by your computer. Connectors on the Mini-Card Antenna Cable Color Scheme WLAN, Wi-Fi, WiMax (2 antenna cables) Main (white triangle) white