Dell Inspiron 15 N5030 Inspiron 15 N5030 Setup Guide - Page 43
Solving Problems, Beep Codes - ram
View all Dell Inspiron 15 N5030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
INSPIRON Solving Problems This section provides troubleshooting information for your computer. If you cannot solve your problem using the following guidelines, see "Using Support Tools" on page 47 or "Contacting Dell" on page 70. Beep Codes Your computer might emit a series of beeps during start-up if there are errors or problems. This series of beeps, called a beep code, identifies a problem. If this occurs, write down the beep code and contact Dell (see "Contacting Dell" on page 70). NOTE: To replace parts, see the Service Manual at support.dell.com/manuals. Beep Code Possible Problem One Possible system board failure - BIOS ROM checksum failure Two No RAM detected NOTE: If you installed or replaced the memory module, ensure that the memory module is seated properly. Three Possible system board failure - Chipset error Four RAM read/write failure Five Real Time Clock failure Six Video card or chip failure Seven Processor failure Eight Display failure 41