Dell Inspiron 17 7779 2-in-1 Inspiron 17 70002-in-1 Service Manual - Page 78
Replacing the I/O board, Procedure, Post-requisites, computer, follow the instructions
View all Dell Inspiron 17 7779 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Replacing the I/O board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Using the alignment posts, place the I/O board on the palm-rest assembly. 2 Align the screw holes on the I/O board with the screw holes on the palmrest assembly. 3 Replace the screws that secure the I/O board to the palm-rest assembly. 4 Connect the power and volume-buttons board cable and coin-cell battery cable to the I/O board. 5 Connect the I/O-board cable to the I/O board. 6 Adhere the tape that secures the I/O-board cable to the I/O board. Post-requisites 1 Replace the wireless card. 2 Replace the battery. 3 Replace the base cover. 78