Dell Latitude D600 Service Manual - Page 36
Display Bezel, Display Panel
View all Dell Latitude D600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Display Assembly and Display Latch: Dell Latitude D600 Service Manual 3 display bezel 4 display panel 6M873 7 flex cable See MINI RSL 8 M2 x 5-mm screws (4) 6M871 Display Bezel CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Remove the keyboard. 3. Remove the display assembly. 4. Use a plastic scribe to pry the six display bumpers out of the screw holes located on the front of the bezel. 5. Remove the six M2 x 5-mm screws located on the front of the bezel. NOTICE: Carefully separate the bezel from the top cover to avoid damage to the bezel. 6. Starting at the bottom of the display panel (by the Dell™ logo), use your fingers to separate the bezel from the top cover by lifting the inside edge of the bezel away from the top cover. Display Panel file:///F|/Service%20Manuals/Dell/Latitude/d600/display.htm (6 of 10) [2/28/2004 8:15:47 AM]