Dell Mobile Streak 7 Wifi Only Dell Latitude 10 - ST2 Owner's Manual - Page 23
Installing the Docking Board, Removing the System Board
View all Dell Mobile Streak 7 Wifi Only manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
5. Remove the docking board from the computer and disconnect the home-button board cable. Installing the Docking Board 1. Connect the home-button board cable to the docking board and place the docking board in its slot in the computer. 2. Tighten the screws to secure the docking board to the computer. 3. Connect the docking board power flex cable to the connector. 4. Install the: a) front camera b) speaker c) WWAN Card d) SmartCard reader e) base cover f) battery 5. Follow the procedures in After Working Inside Your Computer. Removing the System Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) battery b) base cover c) SmartCard reader d) WWAN card e) speaker 23
5.
Remove the docking board from the computer and disconnect the home-button board cable.
Installing the Docking Board
1.
Connect the home-button board cable to the docking board and place the docking board in its slot in the computer.
2.
Tighten the screws to secure the docking board to the computer.
3.
Connect the docking board power flex cable to the connector.
4.
Install the:
a)
front camera
b)
speaker
c)
WWAN Card
d)
SmartCard reader
e)
base cover
f)
battery
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the System Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
battery
b)
base cover
c)
SmartCard reader
d)
WWAN card
e)
speaker
23