Dell OptiPlex Gs Service Manual (.pdf) - Page 55

Removing and Replacing Parts in the Low-Profile Sy..., Recommended Tools

Get Dell OptiPlex Gs PDF manuals and user guides View all Dell OptiPlex Gs manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Chapter 4 Removing and Replacing Parts in the Low-Profile System This chapter provides procedures for removing the components, assemblies, and subassemblies in the Dell OptiPlex Gs or Gs+ low-profile computer. If you are servicing a Dell OptiPlex Gs or Gs+ midsize computer, use Chapter 5, "Removing and Replacing Parts in the Midsize System." Unless otherwise noted, each procedure assumes the following: • You have performed the steps in "Precautionary Measures" found later in this chapter. • You have removed the computer cover. • You can replace or reinstall a part by performing the removal procedure in reverse order unless additional information is provided. Recommended Tools Most of the procedures in this chapter require the use of one or more of the following tools: • Small flat-blade screwdriver • Wide flat-blade screwdriver • Number 1 and number 2 Phillips-head screwdrivers • 1/4-inch nutdriver • Tweezers or long-nose pliers • Chip removal tool Also, use a wrist grounding strap as explained in the next section, "Precautionary Measures." Removing and Replacing Parts in the Low-Profile System 4-1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
Removing and Replacing Parts in the Low-Profile System
4-1
Chapter 4
Removing and Replacing Parts
in the Low-Profile System
T
his chapter provides procedures for removing the components, assemblies,
and subassemblies in the Dell OptiPlex Gs or Gs+ low-profile computer. If you
are servicing a Dell OptiPlex Gs or Gs+ midsize computer, use Chapter 5,
“Removing and Replacing Parts in the Midsize System.”
Unless otherwise noted, each procedure assumes the following:
•
You have performed the steps in “Precautionary Measures” found later in
this chapter.
•
You have removed the computer cover.
•
You can replace or reinstall a part by performing the removal procedure in
reverse order unless additional information is provided.
R
ecommended Tools
Most of the procedures in this chapter require the use of one or more of the fol-
lowing tools:
•
Small flat-blade screwdriver
•
Wide flat-blade screwdriver
•
Number 1 and number 2 Phillips-head screwdrivers
•
1/4
-inch nutdriver
•
Tweezers or long-nose pliers
•
Chip removal tool
Also, use a wrist grounding strap as explained in the next section, “Precaution-
ary Measures.”