Dell PowerConnect 3524 User's Guide - Page 386

Figure 7-69. LAG Membership The LAG Membership page contains the following fields: • LACP - Aggregates the port to a LAG, using LACP. • LAG - Adds a port to a LAG, and indicates the specific LAG to which the port belongs. Adding Ports to a LAG or LACP 1 Open the LAG Membership page. 2 In the LAG row (the second row), toggle the button to a specific number to aggregate or remove the port to that LAG number. 3 In the LACP row (the first row), toggle the button under the port number to assign either the LACP or the static LAG. 4 Click Apply Changes. The port is added to the LAG or LACP, and the device is updated. Adding Ports to LAGs Using CLI Commands The following table summarizes the equivalent CLI commands for assigning ports to LAGs as displayed in the LAG Membership page. Table 7-37. LAG Membership CLI Commands CLI Command channel-group portchannel-number mode {on | auto} show interfaces port-channel [port-channel-number] Description Associates a port with a port-channel. Use the no form of this command to remove the channel-group configuration from the interface. Displays port-channel information. 386 Configuring Switch Information