Dell PowerConnect 3548 User's Guide - Page 210
interface ethernet g1, lldp enable, Consoleconfig
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
• Tx Optional TLVs - Contains a list of optional TLVs advertised by the port. For the complete list, see the Available TLVs field. • Management IP Address - Indicates the management IP address that is advertised from the interface. - Use Default - Specifies the way TLVs are included: - Checked - Only mandatory TLVs are used by default; they are Chassis subtype (MAC address), Port subtype (port number), and TTL (time-to-leave equal to 120s). - Unchecked - User-defined TLVs consisting of the 3 above mentioned mandatory TLVs plus optional TLVs that are moved by user from the Avalable set of TLVs. The LLDP Port Table page displays the LLDP Port Configuration. To open the LLDP Port Table, click Security → LLDP → Port Settings → Show All in the tree view. Figure 6-78. LLDP Port Table Table 6-44. LLDP Port settings CLI Commands CLI Command clear lldp rx interface lldp optional-tlv tlv1 [tlv2 ... tlv5] lldp enable [rx | tx | both] Description Restarts the LLDP RX state machine and clearing the neighbors table Specifies which optional TLVs from the basic set should be transmitted To enable Link Layer Discovery Protocol (LLDP) on an interface. The following is an example of the CLI commands: Console(config)# interface ethernet g1 Console(config-if)# lldp enable 210 Configuring System Information