Dell PowerConnect 6224P Release Notes - Page 25
RADIUS Accounting Servers, Spanning Tree, Stacking/CX-4 Module Configuration, Configurable Message - powerconnect 6224 reset factory
View all Dell PowerConnect 6224P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
PowerConnect 6224/6224F/6224P/6248/6248P Release Notes RADIUS Accounting Servers Title radius-server host acct Description The switches do not support creating accounting server names with the same name although the CLI Reference Manual and User Guide state that it is supported. Default: Not applicable Spanning Tree Title no spanning-tree transmit hold-count Description The hold-count keyword is not required when resetting the spanning-tree transmit hold-count. Default: Not applicable Stacking/CX-4 Module Configuration Title stack-port / {ethernet | stack} Description This command is used to configure a port on a CX-4 or stacking plug-in modules as either an ethernet or stack port. Default: From the factory the ports are all configured as Ethernet ports. If upgrading from a previous release the modes will be preserved and no configuration should be necessary. Configurable Message of the Day Banner Title banner motd no banner motd banner motd acknowledge no banner motd acknowledge Description Controls (enables or disables) the display of message-of-the-day banners. 'banner motd' enables the banner, and allows configuration of messageof-the-day banners. Use 'no banner motd' to delete the message, and disable the banner. Default: Disabled by default. The user will be required to acknowledge the banner displayed on the console if 'banner motd acknowledge' is executed. The user would have to type "y" or "n" to continue to the login prompt. If "n" is typed, the session is terminated and no further communication is allowed on that session. However, serial connection will not get terminated if user does not enter 'y'. Use 'no' form of the command to disable banner acknowledge. Default: Disabled by default. Dot1X Title dot1x timeout guest-vlan-period Description Use this command in Interface Config Mode to set the number of seconds that the switch waits before authorizing the client if the client is a dot1x unaware client. Default: The switch remains in the quiet state for 90 seconds. Refer to the Dell™ PowerConnect™ 6200 Series Systems CLI Reference Guide for details. System Firmware Version 3.2.0.6 Page 23