Dell PowerConnect W-IAP Remote Web Management Interface User Guide - Page 92
Configuring a TACACS/TACACS+ server
View all Dell PowerConnect W-IAP Remote manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
4 Configuring a TACACS/TACACS+ server FIGURE 63 RADIUS server information The RADIUS Server display contains the following information. IP Address Auth Port Acct Port Usage Add Delete Reset Show The IP Address of the route's destination. This parameter specifies the Authentication port number. It is an optional parameter. The default is 1645. This parameter specifies the Accounting port number. It is an optional parameter. The default is 1646. Enables the server to be used in any of the four modes: • Authentication-only • Authorization-only • Accounting-only • Any AAA operation Allows you to add the IP Address. Allows you to delete the changes made. To undo your changes, click Reset. Displays the RADIUS server entries. Configuring a TACACS/TACACS+ server Select Configure > System > Tacacs to configure a TACACS server. Click Apply to save your configuration or click Reset to undo changes. 82 PowerConnect B-Series FCX Web Management Interface User Guide 53-1002268-01