Dell PowerConnect W-IAP3WN Dell Instant 5.0.3.0-1.1.0.0 MIB Reference Guide - Page 20

The first object of a table is an Entry. The keyword SEQUENCE lists the objects of the table that contain device information. Each subsequent object (Informative MIB Objects) inherits the OID of the Entry, and contains information sorted by keywords: Syntax, Access, Status, Description. For details about keywords, see "MIBs" on page 13. The OID of the Entry is aiAccessPointEntry is aiAccessPointTable 1, which represents 1.3.6.1.4.1.674.2.3.3.1.2.1.1. The OIDs of the subsequent objects of this table are appended increments of the Entry OID. Group aiStateGroup OBJECT IDENTIFIER ::= { aiMIB 2 } Table aiAccessPointTable OBJECT-TYPE SYNTAX SEQUENCE OF AiAccessPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This contains all access points connected to the virtual controler. This table is empty on AP where virtual controller is not active" ::= { aiStateGroup 1 } Entry aiAccessPointEntry OBJECT-TYPE SYNTAX AiAccessPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { aiAPMACAddress } ::= { aiAccessPointTable 1 } AiAccessPointEntry ::= SEQUENCE { aiAPMACAddress MacAddress, aiAPName DisplayString, aiAPIPAddress IpAddress, aiAPSerialNum DisplayString, aiAPModel OBJECT IDENTIFIER, aiAPModelName DisplayString, aiAPCPUUtilization Integer32, aiAPMemoryFree Integer32, aiAPUptime TimeTicks Closing Line Following is the closing line-the end of the MIBs file. END SNMP File The snmp.h file lists the OIDs of all MIBs. Following are sections from snmp.h that show the complete OID of each of the Controller Transport Service (CTS) MIB elements. The list starts from the ancestral parent iso. The SNMP file with all Dell MIBs is listed in Chapter 4, "SNMP MIBs Reference" on page 39. All Instant MIBs inherit their OIDs from the Dell MIB node. The following rows list the MIBs that precede CTS, starting from iso. 20 | Using MIBs Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | MIB Reference Guide