Dell PowerEdge 2650 Removing and Replacing a System Cooling Fan - Page 1
Dell PowerEdge 2650 Manual
View all Dell PowerEdge 2650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
www.dell.com | support.dell.com CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. Removing and Replacing a System Cooling Fan Removing a Cooling Fan CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your System Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge. NOTICE: The cooling fans are hot-pluggable. To maintain proper cooling while the system is on, replace only one fan at a time. 1 Remove the cover. a Remove the bezel, if applicable. b Loosen the three thumbscrews that secure the cover to the chassis. See Figure 1. c Slide the cover backward and grasp the cover at both ends. d Carefully lift the cover away from the system. 2 Pull the fan straight up to clear the chassis. See Figure 2. P/N 6Y885 Rev. A00 December 2002 06Y885A00